Investigation of single crystal ferrite thin film Semiannual report, 1 Feb. - 31 Jul. 1969

Vapor deposition of single crystal thin films of lithium ferrite utilizing ferric chlorid

Investigation of single-crystal ferrite thin film

Chemical vapor deposition growth of epitaxial single crystal lithium ferrite thin film

Investigation of single crystal ferrite thin films

Materials suitable for use in magnetic bubble domain memories were developed for aerospace applications. Practical techniques for the preparation of such materials in forms required for fabrication of computer memory devices were considered. The materials studied were epitaxial films of various compositions of the gallium-substituted yttrium gadolinium iron garnet system. The major emphasis was to determine their bubble properties and the conditions necessary for growing uncracked, high quality films

Information retrieval system

Generalized information storage and retrieval system capable of generating and maintaining a file, gathering statistics, sorting output, and generating final reports for output is reviewed. File generation and file maintenance programs written for the system are general purpose routines

Strong interaction of a turbulent spot with a shock-induced separation bubble

Direct numerical simulations have been conducted to study the passage of a turbulent spot through a shock-induced separation bubble. Localized blowing is used to trip the boundary layer well upstream of the shock impingement, leading to mature turbulent spots at impingement, with a length comparable to the length of the separation zone. Interactions are simulated at free stream Mach numbers of two and four, for isothermal (hot) wall boundary conditions. The core of the spot is seen to tunnel through the separation bubble, leading to a transient reattachment of the flow. Recovery times are long due to the influence of the calmed region behind the spot. The propagation speed of the trailing interface of the spot decreases during the interaction and a substantial increase in the lateral spreading of the spot was observed. A conceptual model based on the growth of the lateral shear layer near the wingtips of the spot is used to explain the change in lateral growth rat

Labour efficiency on-farm

End of project reportImprovements in milking efficiency have a greater influence than any other aspect of the dairy farmers work on overall farm labour inputs (Whipp, 1992). In order to facilitate the examination of milking process labour inputs, the milking process may be divided into the following three components: herding pre and post milking (transfer of cows to and from the milking parlour); milking (milking tasks / work routines within the parlour); and washing (washing of milking machine and yard). Meanwhile, within milking specifically, the number of cows milked per operator per hour is the best measure of both the performance of the operator and the milking installation (Clough, 1978). This is affected by the following three factors: the milking times of the cows, the number and arrangement of the milking units, and the operator’s work routine (Whipp, 1992). The addition of extra milking units will only increase milking performance if the operator has idle time during milking (Hansen, 1999)

Simulation of the Performance of the IISc Chemical Kinetics Shock Tube

This report presents the results of an investigation of the performance of the Chemical Kinetics Shock tube at the Indian Institute of Science. The one-dimensional Lagrangian code L1d of Jacobs (1998) has been used to simulate the tube at several operating conditions. The conditions have different shock tube filling pressures, resulting in different shock speeds and different tube lengths, resulting in different dwell times. The simulations have been performed both with and without viscous effects simulated in the tubes. At the lowest shock tube filling pressure condition, the shock tube operates in an overtailored mode and it is undertailored at the higher filling pressure conditions. The results show that viscous effects, which lead to attenuation of the primary shock and heat loss from the test gas to the tube walls, result in an increasing p5 pressure during the test time. The viscous effects are more dominant at the condition with the lowest filling pressure (highest primary shock speed). A simulation run for 50 ms after diaphragm rupture or the configuration with a long driver tube shows that the test gas is periodically re-compressed by reflections of waves along the driver and shock tubes. The recompressions become sequentially weaker and thus the test gas temperature and pressure are never raised to as high levels as for the primary compression

Luminescence Mechanisms in Quaternary Al\u3csub\u3ex\u3c/sub\u3eIn\u3csub\u3ey\u3c/sub\u3eGa\u3csub\u3e1-x-y\u3c/sub\u3eN Materials

Low-temperature photoluminescence investigations have been carried out in the quaternary AlInGaN epilayers and AlInGaN/AlInGaN multiple quantum wells (MQWs) grown by pulsedmetalorganic chemical-vapor deposition (PMOCVD). With increasing excitation power density, the emission peaks in both AlInGaN epilayers and MQWs show a strong blueshift and theirlinewidths increase. The luminescence of the samples grown by PMOCVD is attributed to recombination of carriers/excitons localized at band-tail states. We also demonstrate theluminescence properties of AlInGaN and AlGaN materials grown by a pulsed atomic-layerepitaxy and conventional MOCVD, respectively

A highly reproducible rotenone model of Parkinson's disease

Producción CientíficaThe systemic rotenone model of Parkinson's disease (PD) accurately replicates many aspects of the pathology of human PD and has provided insights into the pathogenesis of PD. The major limitation of the rotenone model has been its variability, both in terms of the percentage of animals that develop a clear-cut nigrostriatal lesion and the extent of that lesion. The goal here was to develop an improved and highly reproducible rotenone model of PD. In these studies, male Lewis rats in three age groups (3, 7 or 12-14 months) were administered rotenone (2.75 or 3.0 mg/kg/day) in a specialized vehicle by daily intraperitoneal injection. All rotenone-treated animals developed bradykinesia, postural instability, and/or rigidity, which were reversed by apomorphine, consistent with a lesion of the nigrostriatal dopamine system. Animals were sacrificed when the PD phenotype became debilitating. Rotenone treatment caused a 45% loss of tyrosine hydroxylase-positive substantia nigra neurons and a commensurate loss of striatal dopamine. Additionally, in rotenone-treated animals, alpha-synuclein and poly-ubiquitin positive aggregates were observed in dopamine neurons of the substantia nigra. In summary, this version of the rotenone model is highly reproducible and may provide an excellent tool to test new neuroprotective strategies