5,047 research outputs found
Program for calculating laminar and turbulent boundary layers in arbitrary pressure gradients
Computer program predicts growth of boundary layers along any surface where air is flowing. Two integral methods, Cohen-Reshotko and Sasman-Cresici, calculate laminar boundary layers and turbulent boundary layers, respectively; Schlichting-Granville method predicts transition from laminar to turbulent flow
FORTRAN program for generating a two-dimensional orthogonal mesh between two arbitrary boundaries
Computer program is described which computes and plots coordinates for two-dimensional orthogonal mesh for channel containing solid body, about which flow passes and which spans channel from one wall to the other
FORTRAN 4 program calculates velocities and streamlines in a tandem blade turbomachine
Computer program gives blade-to-blade solution of the two-dimensional, subsonic, compressible, nonviscous flow problem for a circular or straight infinite cascade of tandem or slotted turbomachine blades. The method of solution is based on the stream function using iterative solution of nonlinear finite-difference equations
Computer program for calculating velocities and streamlines on mid-channel flow surface of axial or mixed-flow turbomachine
Program uses finite-difference and stream filament methods, input consists of blade and flow-channel geometry, upstream and downstream flow conditions from hub to shroud, and mass flow. Output includes streamline coordinates, flow angles, and velocities on mid-channel flow surface
FORTRAN program for computing coordinates of circular-arc, single and tandem, turbine and compressor, blade sections on a plane
Coordinates for circular arc blade section of aircraft high speed compressor gas turbines were computed using FORTRAN 4 program. Aerodynamic configurations studied include single segment airfoils, airfoils with slots, and mutiple segment tandem arranged airfoil
Multiloop Manual Control of Dynamic Systems
Human interaction with a simple, multiloop dynamic system in which the human's activity was systematically varied by changing the levels of automation was studied. The control loop structure resulting from the task definition parallels that for any multiloop manual control system, is considered a sterotype. Simple models of the human in the task, and upon extending a technique for describing the manner in which the human subjectively quantifies his opinion of task difficulty were developed. A man in the loop simulation which provides data to support and direct the analytical effort is presented
FORTRAN program for calculating velocities and streamlines on the hub-shroud mid-channel flow surface of an axial-or mixed-flow turbomachine. 2: Programmer's manual
A FORTRAN-IV computer program, MERIDL, has been developed that obtains a subsonic or shock-free transonic flow solution on the hub-shroud mid-channel flow surface of a turbomachine. The blade row may be fixed or rotating and may be twisted and leaned. Flow may be axial or mixed, up to 45 deg from axial. Upstream and downstream flow variables can vary from hub to shroud, and provision is made to correct for loss of stagnation pressure. The results include velocities, streamlines, and flow angles on the flow surface and approximate blade surface velocities. Subsonic solutions are obtained by a finite-difference stream-function solution. Transonic solutions are obtained by a velocity-gradient method, using information from a finite-difference stream-function solution at a reduced mass flow
Revised FORTRAN program for calculating velocities and streamlines on the hub-shroud midchannel stream surface of an axial-, radial-, or mixed-flow turbomachine or annular duct. 2: Programmer's manual
A FORTRAN IV computer program has been developed that obtains a detailed subsonic or shock free transonic flow solution on the hub-shroud midchannel stream surface of a turbomachine. The blade row may be fixed or rotating, and the blades may be twisted and leaned. Flow may be axial, mixed, or radial. Upstream and downstream flow variables may vary from hub to shroud, and provisions are made to correct for loss of stagnation pressure. The results include velocities, streamlines, and flow angles on the stream surface and approximate blade surface velocities
Revised FORTRAN program for calculating velocities and streamlines on the hub-shroud midchannel stream surface of an axial-, radial-, or mixed-flow turbomachine or annular duct. 1: User's manual
A FORTRAN 4 computer program was developed that obtains a detailed subsonic or shock-free transonic flow solution on the hub-shroud midchannel stream surface of a turbomachine. The blade row may be fixed or rotating, and the blades may be twisted and leaned. Flow may be axial, mixed, or radial. Upstream and downstream flow variables may vary from hub to shroud, and provision is made to correct for loss of stagnation pressure. The results include velocities, streamlines, and flow angles on the stream surface as well as approximate blade surface velocities. Subsonic solutions are obtained by a finite-difference, stream-function solution. Transonic solutions are obtained by a velocity-gradient method that uses information from a finite-difference, stream-function solution at a reduced mass flow
Computational methods for internal flows with emphasis on turbomachinery
Current computational methods for analyzing flows in turbomachinery and other related internal propulsion components are presented. The methods are divided into two classes. The inviscid methods deal specifically with turbomachinery applications. Viscous methods, deal with generalized duct flows as well as flows in turbomachinery passages. Inviscid methods are categorized into the potential, stream function, and Euler aproaches. Viscous methods are treated in terms of parabolic, partially parabolic, and elliptic procedures. Various grids used in association with these procedures are also discussed
- …