186 research outputs found
Stratospheric warmings: Synoptic, dynamic and general-circulation aspects
Synoptic descriptions consist largely of case studies, which involve a distinction between major and minor warmings. Results of energetics studies show the importance of tropospheric-stratospheric interaction, and the significance of the pressure-work term near the tropopause. Theoretical studies have suggested the role of wave-zonal flow interaction as well as nonlinear interaction between eddies, chemical and photochemical reactions, boundary forcing, and other factors. Numerical models have been based on such considerations, and these are discussed under various categories. Some indication is given as to why some of the models have been more successful than others in simulating warnings. The question of ozone and its role in warmings is briefly discussed. Finally, a broad view is taken of stratospheric warmings in relation to man's activities
Recommended from our members
Cultural and Religious Identities in an Era of Information and Communications Globalization
The rapid advances in information and communication technologies coupled with the dominant overarching Neo-liberal/capitalist ideological underpinnings of the dominant Western powers have generated a momentum towards a homogeneous global village. The impact of which has been to expand World conflict and propelled many nations towards losing their national identity and traditions. This article discusses the various impacts from IT globalization and calls for a new global communication awareness
Recommended from our members
Mechanical design of a high field common coil magnet
A common coil design for high field 2-in-1 accelerator magnets has been previously presented as a "conductor-friendly" option for high field magnets applicable for a Very Large Hadron Collider. This paper presents the mechanical design for a 14 tesla 2-in-1 dipole based on the common coil design approach. The magnet will use a high current density Nb/sub 3/Sn conductor. The design addresses mechanical issues particular to the common coil geometry: horizontal support against coil edges, vertical preload on coil faces, end loading and support, and coil stresses and strains. The magnet is the second in a series of racetrack coil magnets that will provide experimental verification of the common coil design approach. (9 refs)
Rutherford cables with anisotropic transverse resistance
Putting a resistive core into the center of a Rutherford cable increases resistance between strands in the crossover direction, which greatly reduces the coupling currents, even when the resistance to adjacent turns remains small. This allows one to improve stability by soldering strands together or using porous metal, without incurring a penalty of increased coupling. We describe our manufacturing methods and an experimental measurement of coupling
Recommended from our members
Power tests of a string of magnets comprising a full cell of the Superconducting Super Collider
In this paper we describe the operation and testing of a string of magnets comprising a full cell of the Superconducting Super Collider (SSC). The full cell configuration composed of ten dipoles, two quadrupoles, and three spool pieces is the longest SSC magnet string ever tested. Although the tests of the full cell were undertaken after the SSC project was marked for termination, their completion was deemed necessary and useful to future efforts at other accelerator laboratories utilizing Superconducting magnets. The focus of this work is on the electrical and cryogenic performance of the string components and the quench protection system with an emphasis on solving some of the questions concerning electrical performance raised during the previous two experimental runs involving a half cell configuration
Recommended from our members
Nb3Sn Quadrupole Magnets for the LHC IR
The development of insertion quadrupoles with 205 T/m gradient and 90 mm bore represents a promising strategy to achieve the ultimate luminosity goal of 2.5 x 10{sup 34} cm{sup -2}s{sup -1} at the Large Hadron Collider (LHC). At present, Nb{sub 3}Sn is the only practical conductor which can meet these requirements. Since Nb{sub 3}Sn is brittle, and considerably more strain sensitive than NbTi, the design concepts and fabrication techniques developed for NbTi magnets need to be modified appropriately. In addition, IR magnets must provide high field quality and operate reliably under severe radiation loads. The results of conceptual design studies addressing these issues are presented
Quench performance of Fermilab high gradient quadrupole short models for the LHC Interaction Regions
Fermilab and LBNL are in the midst of superconducting magnet R&D program to test and optimize the design of quadrupoles to be used in the LHC Interaction Region inner triplets. The magnets are required to deliver a 215 T/m gradient across a 70 mm aperture. Five quadrupole short models have been fabricated and four of them have been tested. This paper describes the last model design details and reports the results of the magnet quench performance study. (5 refs)
Recommended from our members
An R&D Approach to the Development of Long Nb3Sn Accelerator Magnets Using the key and Bladder Technology
Building accelerator quality magnets using Nb{sub 3}Sn for next generation facilities is the challenge of the next decade. The Superconducting Magnet Group at LBNL has developed an innovative support structure for high field magnets. The structure is based on an aluminum shell over iron yokes using hydraulic bladders and locking keys for applying the pre-stress. At cool down the pre-stress is almost doubled due to the differences of thermal contraction. This new structure allows precise control of the pre-stress with minimal spring back and conductor over-stress. At present the support structure has been used with prototype magnets up to one meter in length. In this paper, the design of a 4-meter long, 11 Tesla, wind-and-react racetrack dipole will be presented as a possible step toward the fabrication of long Nb{sub 3}Sn accelerator magnets
Recommended from our members
Quench performance of superconducting quadrupole magnets for the new Fermilab low beta insertion
Construction and testing of the components for the new Tevatron D0/B0 low beta insertion has been nearly completed. The devices include superconducting cold iron quadrupoles utilizing a 2-shell, cos2{theta} coil geometry with a 7.6 cm aperture. The maximum design gradient is 1.41 T/cm at an operating current of 4832 A. They have the highest current density with the highest peak field on the winding of any quadrupole yet built. This paper summarizes the quench performance and ramp rate sensitivity of the 2-shell design and relates the performance characteristics to the relevant aspects of design and fabrication. 8 refs., 6 figs., 3 tabs
- …