Trapped-ion qutrit spin molecule quantum computer

We present a qutrit quantum computer design using trapped ions in the presence of a magnetic field gradient. The magnetic field gradient induces a "spin-spin" type coupling, similar to the J-coupling observed in molecules, between the qutrits which allows conditional quantum logic to take place. We describe in some detail, how one can execute specific one and two qutrit quantum gates, required for universal qutrit quantum computing.Comment: 4 pages, 2 figure

Variable mixer propulsion cycle

A design technique, method and apparatus are delineated for controlling the bypass gas stream pressure and varying the bypass ratio of a mixed flow gas turbine engine in order to achieve improved performance. The disclosed embodiments each include a mixing device for combining the core and bypass gas streams. The variable area mixing device permits the static pressures of the core and bypass streams to be balanced prior to mixing at widely varying bypass stream pressure levels. The mixed flow gas turbine engine therefore operates efficiently over a wide range of bypass ratios and the dynamic pressure of the bypass stream is maintained at a level which will keep the engine inlet airflow matched to an optimum design level throughout a wide range of engine thrust settings

Thin film dielectric microstrip kinetic inductance detectors

Microwave Kinetic Inductance Detectors, or MKIDs, are a type of low temperature detector that exhibit intrinsic frequency domain multiplexing at microwave frequencies. We present the first theory and measurements on a MKID based on a microstrip transmission line resonator. A complete characterization of the dielectric loss and noise properties of these resonators is performed, and agrees well with the derived theory. A competitive noise equivalent power of 5$\times10^{-17}$ W Hz$^{-1/2}$ at 1 Hz has been demonstrated. The resonators exhibit the highest quality factors known in a microstrip resonator with a deposited thin film dielectric.Comment: 10 pages, 4 figures, APL accepte

The Survival And Growth Of South Carolina Seed Oysters In Virginia Waters

Most of the seed oysters planted on private grounds along the Atlantic Coast of the United States are obtained from public seed beds. The supply depends largely upon a wild crop over which there is little control. It is to be expected, perhaps, that the quantity of seed available at various localities along the coast is in proportion to the duration of the warm season. It follows that oystermen are usually searching southward for their supply of seed and the ramifications of this hunt are complex and ever changing

Reduction of Ion Heating During Magnetic Reconnection by Large-Scale Effective Potentials

The physical processes that control the partition of released magnetic energy between electrons and ions during reconnection is explored through particle-in-cell simulations and analytical techniques. We demonstrate that the development of a large-scale parallel electric field and its associated potential controls the relative heating of electrons and ions. The potential develops to restrain heated exhaust electrons and enhances their heating by confining electrons in the region where magnetic energy is released. Simultaneously the potential slows ions entering the exhaust below the Alfv\'enic speed expected from the traditional counterstreaming picture of ion heating. Unexpectedly, the magnitude of the potential and therefore the relative partition of energy between electrons and ions is not a constant but rather depends on the upstream parameters and specifically the upstream electron normalized temperature (electron beta). These findings suggest that the fraction of magnetic energy converted into the total thermal energy may be independent of upstream parameters

Large-area sheet task advanced dendritic web growth development

The computer code for calculating web temperature distribution was expanded to provide a graphics output in addition to numerical and punch card output. The new code was used to examine various modifications of the J419 configuration and, on the basis of the results, a new growth geometry was designed. Additionally, several mathematically defined temperature profiles were evaluated for the effects of the free boundary (growth front) on the thermal stress generation. Experimental growth runs were made with modified J419 configurations to complement the modeling work. A modified J435 configuration was evaluated

Silicon web process development

Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities

Low cost silicon solar array project large area silicon sheet task: Silicon web process development

Growth configurations were developed which produced crystals having low residual stress levels. The properties of a 106 mm diameter round crucible were evaluated and it was found that this design had greatly enhanced temperature fluctuations arising from convection in the melt. Thermal modeling efforts were directed to developing finite element models of the 106 mm round crucible and an elongated susceptor/crucible configuration. Also, the thermal model for the heat loss modes from the dendritic web was examined for guidance in reducing the thermal stress in the web. An economic analysis was prepared to evaluate the silicon web process in relation to price goals

Large area sheet task: Advanced dendritic web growth development

The growth of silicon dendritic web for photovoltaic applications was investigated. The application of a thermal model for calculating buckling stresses as a function of temperature profile in the web is discussed. Lid and shield concepts were evaluated to provide the data base for enhancing growth velocity. An experimental web growth machine which embodies in one unit the mechanical and electronic features developed in previous work was developed. In addition, evaluation of a melt level control system was begun, along with preliminary tests of an elongated crucible design. The economic analysis was also updated to incorporate some minor cost changes. The initial applications of the thermal model to a specific configuration gave results consistent with experimental observation in terms of the initiation of buckling vs. width for a given crystal thickness

The effects of ultrasound on the electro-oxidation of sulfate solutions at low pH

The electro‐oxidation of sulfate solutions is a well‐established route for the generation of powerful oxidants such as persulfate. Despite this, the effects of simultaneous ultrasound irradiation during this process has attracted little attention. Herein, we investigate the effects of a low‐intensity ultrasonic field on the generation of solution‐phase oxidants during the electro‐oxidation of sulfate solutions. Our results show that at high current densities and high sulfate concentrations, ultrasound has little effect on the Faradaic and absolute yields of solution‐phase oxidants. However, at lower current densities and sulfate concentrations, the amount of these oxidants in solution appears to decrease under ultrasonic irradiation. A mechanism explaining these results is proposed (and validated), whereby anodically‐generated sulfate and hydroxyl radicals are more effectively transported into bulk solution (where they are quenched) during sonication, whereas in the absence of an ultrasonic field these radicals combine with one another to form more persistent species (such as persulfate) that can be detected by iodometry