735 research outputs found
Errors in nanoparticle growth rates inferred from measurements in chemically reacting aerosol systems
In systems in which aerosols are being formed by chemical transformations,
individual particles grow due to the addition of molecular species. Efforts
to improve our understanding of particle growth often focus on attempts to
reconcile observed growth rates with values calculated from models. However,
because it is typically not possible to measure the growth rates of
individual particles in chemically reacting systems, they must be inferred
from measurements of aerosol properties such as size distributions, particle
number concentrations, etc. This work discusses errors in growth rates
obtained using methods that are commonly employed for analyzing atmospheric
data. We analyze data obtained by simulating the formation of aerosols in
a system in which a single chemical species is formed at a constant rate,
R. We show that the maximum overestimation error in measured growth rates
occurs for collision-controlled nucleation in a single-component system in
the absence of a preexisting aerosol, wall losses, evaporation or dilution,
as this leads to the highest concentrations of nucleated particles. Those
high concentrations lead to high coagulation rates that cause the nucleation
mode to grow faster than would be caused by vapor condensation alone. We also
show that preexisting particles, when coupled with evaporation, can
significantly decrease the concentration of nucleated particles. This can
lead to decreased discrepancies between measured growth rate and true growth
rate by reducing coagulation among nucleated particles. However, as particle
sink processes become stronger, measured growth rates can potentially be
lower than true particle growth rates. We briefly discuss nucleation
scenarios in which the observed growth rate approaches zero while the true
growth rate does not
An improved criterion for new particle formation in diverse atmospheric environments
A dimensionless theory for new particle formation (NPF) was developed, using an aerosol population balance model incorporating recent developments in nucleation rates and measured particle growth rates. Based on this theoretical analysis, it was shown that a dimensionless parameter <i>L</i><sub>&Gamma;</sub>, characterizing the ratio of the particle scavenging loss rate to the particle growth rate, exclusively determined whether or not NPF would occur on a particular day. This parameter determines the probability that a nucleated particle will grow to a detectable size before being lost by coagulation with the pre-existing aerosol. Cluster-cluster coagulation was shown to contribute negligibly to this survival probability under conditions pertinent to the atmosphere. Data acquired during intensive measurement campaigns in Tecamac (MILAGRO), Atlanta (ANARChE), Boulder, and Hyytiälä (QUEST II, QUEST IV, and EUCAARI) were used to test the validity of <i>L</i><sub>&Gamma;</sub> as an NPF criterion. Measurements included aerosol size distributions down to 3 nm and gas-phase sulfuric acid concentrations. The model was applied to seventy-seven NPF events and nineteen non-events (characterized by growth of pre-existing aerosol without NPF) measured in diverse environments with broad ranges in sulfuric acid concentrations, ultrafine number concentrations, aerosol surface areas, and particle growth rates (nearly two orders of magnitude). Across this diverse data set, a nominal value of <i>L</i><sub>&Gamma;</sub>=0.7 was found to determine the boundary for the occurrence of NPF, with NPF occurring when <i>L</i><sub>&Gamma;</sub><0.7 and being suppressed when <i>L</i><sub>&Gamma;</sub>>0.7. Moreover, nearly 45% of measured <i>L</i><sub>&Gamma;</sub> values associated with NPF fell in the relatively narrow range of 0.1<<i>L</i><sub>&Gamma;</sub><0.3
Observation of neutral sulfuric acid-amine containing clusters in laboratory and ambient measurements
Recent ab initio calculations showed that amines can enhance atmospheric sulfuric acid-water nucleation more effectively than ammonia, and this prediction has been substantiated in laboratory measurements. Laboratory studies have also shown that amines can effectively displace ammonia in several types of ammonium clusters. However, the roles of amines in cluster formation and growth at a microscopic molecular scale (from molecular sizes up to 2 nm) have not yet been well understood. Processes that must be understood include the incorporation of amines into sulfuric acid clusters and the formation of organic salts in freshly nucleated particles, which contributes significantly to particle growth rates. We report the first laboratory and ambient measurements of neutral sulfuric acid-amine clusters using the Cluster CIMS, a recently-developed mass spectrometer designed for measuring neutral clusters formed in the atmosphere during nucleation. An experimental technique, which we refer to as Semi-Ambient Signal Amplification (SASA), was employed. Sulfuric acid was added to ambient air, and the concentrations and composition of clusters in this mixture were analyzed by the Cluster CIMS. This experimental approach led to significantly higher cluster concentrations than are normally found in ambient air, thereby increasing signal-to-noise levels and allowing us to study reactions between gas phase species in ambient air and sulfuric acid containing clusters. Mass peaks corresponding to clusters containing four H<sub>2</sub>SO<sub>4</sub> molecules and one amine molecule were clearly observed, with the most abundant sulfuric acid-amine clusters being those containing a C2- or C4-amine (i.e. amines with masses of 45 and 73 amu). Evidence for C3- and C5-amines (i.e. amines with masses of 59 and 87 amu) was also found, but their correlation with sulfuric acid tetramer was not as strong as was observed for the C2- and C4-amines. The formation mechanisms for those sulfuric acid-amine clusters were investigated by varying the residence time in the inlet. It was concluded that the amines react directly with neutral clusters and that ion-induced clustering of sulfuric acid cluster ions with amines was not a dominant process. Results from ambient measurements using the Cluster CIMS without addition of sulfuric acid have shown that the sulfuric acid-amine clusters were reasonably well correlated with sulfuric acid tetramer and consistent with the SASA experiments at the same Boulder sampling site. Also, clusters that contain C2- or C4-amines were more abundant and better correlated with sulfuric acid tetramer than other types of amine containing clusters. However, ambient measurements of sulfuric acid-amine clusters remain difficult and highly uncertain because their concentrations are only slightly above background levels, even during nucleation events
Particle Dynamics in a Mass-Conserving Coalescence Process
We consider a fully asymmetric one-dimensional model with mass-conserving
coalescence. Particles of unit mass enter at one edge of the chain and
coalescence while performing a biased random walk towards the other edge where
they exit. The conserved particle mass acts as a passive scalar in the reaction
process , and allows an exact mapping to a restricted ballistic
surface deposition model for which exact results exist. In particular, the
mass- mass correlation function is exactly known. These results complement
earlier exact results for the process without mass. We introduce a
comprehensive scaling theory for this process. The exact anaytical and
numerical results confirm its validity.Comment: 5 pages, 6 figure
Novel synthesis of O(6)-alkylguanine containing oligodeoxyribonucleotides as substrates for the human DNA repair protein, O(6)-methylguanine DNA methyltransferase (MGMT)
The human DNA repair protein O(6)-methylguanine DNA methyltransferase (MGMT) dealkylates mutagenic O(6)-alkylguanine lesions within DNA in an irreversible reaction which results in inactivation of the protein. MGMT also provides resistance of tumours to alkylating agents used in cancer chemotherapy and its inactivation is therefore of particular clinical importance. We describe a post-DNA synthesis strategy which exploits the novel, modified base 2-amino-6-methylsulfonylpurine and allows access for the first time to a wide variety of oligodeoxyribonucleotides (ODNs) containing O(6)-alkylguanines. One such ODN containing O(6)-(4-bromothenyl)guanine is the most potent inactivator described to date with an IC(50) of 0.1 nM
An experimental and numerical study of particle nucleation and growth during low-pressure thermal decomposition of silane
Abstract This paper discusses an experimental and numerical study of the nucleation and growth of particles during low-pressure (∼1:0 Torr) thermal decomposition of silane (SiH 4 ). A Particle Beam Mass Spectrometer was used to measure particle size distributions in a parallel-plate showerhead-type semiconductor reactor. An aerosol dynamics moment-type formulation coupled with a chemically reacting uid ow model was used to predict particle concentration, size, and transport in the reactor. Particle nucleation kinetics via a sequence of chemical clustering reactions among silicon hydride molecular clusters, growth by heterogeneous chemical reactions on particle surfaces and coagulation, and transport by convection, di usion, and thermophoresis were included in the model. The e ect of pressure, temperature, ow residence time, carrier gas, and silane concentration were examined under conditions typically used for low-pressure (∼1 Torr) thermal chemical vapor deposition of polysilicon. The numerical simulations predict that several pathways involving linear and polycyclic silicon hydride molecules result in formation of particle "nuclei," which subsequently grow by heterogeneous reactions on the particle surfaces. The model is in good agreement with observations for the pressure and temperature at which particle formation begins, particle sizes and growth rates, and relative particle concentrations at various process conditions. A simpliÿed, computationally inexpensive, quasi-coupled modeling approach is suggested as an engineering tool for process equipment design and contamination control during low-pressure thermal silicon deposition.
Recommended from our members
An overview of ISCAT 2000
The Investigation of Sulfur Chemistry in the Antarctic Troposphere (ISCAT) took place over the timer period of 15 November to 31 December in the year 2000. The study location was the Amundsen Scott Station in Antarctica. ISCAT 2000 defines the second phase of a program designed to explore tropospheric chemistry in Antarctica. As in 1998, the 2000 ISCAT study revealed a strong oxidizing environment at South Pole (SP). During the 2000 investigation, however, the suite of measurements was greatly expanded. These new measurements established the recycling of reactive nitrogen as a critical component of this unique environment. This paper first presents the historical background leading up to the ISCAT 2000 observations; then it focuses on providing a summary of the year 2000 results and contrasts these with those recorded during 1998. Important developments made during the 2000 study included the recording of SP data for several species being emitted from the snowpack. These included NO, H 2O2 and CH2O. In this context, eddy-diffusion flux measurements provided the first quantitative estimates of the SP NO and NOx snow-to-atmosphere fluxes. This study also revealed that HNO 3 and HO2NO2 were major sink species for HOx and NOx radicals. And, it identified the critical factors responsible for SP NO levels exceeding those at other polar sites by nearly an order of magnitude. Finally, it reports on the levels of gas phase sulfur species and provides evidence indicating that the absence of DMS at SP is most likely due to its greatly shorten chemical lifetime in the near vicinity of the plateau. It is proposed that this is due to the influence of NO on the distribution of OH in the lower free troposphere over a region that extends well beyond the plateau itself. Details related to each of the above findings plus others can be found in the 11 accompanying Special Issue papers. © 2004 Elsevier Ltd. All rights reserved
Recommended from our members
Ac loss calorimeter for three-phase cable
A calorimeter for measuring ac losses in meter-long lengths of HTS superconducting power transmission line cables is described. The calorimeter, which is based on a temperature difference technique, has a precision of 1 mW and measures single, two-phase (coupling), and three-phase losses. The measurements show significant coupling losses between phases
New particle formation in the sulfuric acid-dimethylamine-water system: reevaluation of CLOUD chamber measurements and comparison to an aerosol nucleation and growth model
A recent CLOUD (Cosmics Leaving OUtdoor Droplets) chamber study showed that sulfuric acid and dimethylamine produce new aerosols very efficiently and yield particle formation rates that are compatible with boundary layer observations. These previously published new particle formation (NPF) rates are reanalyzed in the present study with an advanced method. The results show that the NPF rates at 1.7 nm are more than a factor of 10 faster than previously published due to earlier approximations in correcting particle measurements made at a larger detection threshold. The revised NPF rates agree almost perfectly with calculated rates from a kinetic aerosol model at different sizes (1.7 and 4.3 nm mobility diameter). In addition, modeled and measured size distributions show good agreement over a wide range of sizes (up to ca. 30 nm). Furthermore, the aerosol model is modified such that evaporation rates for some clusters can be taken into account; these evaporation rates were previously published from a flow tube study. Using this model, the findings from the present study and the flow tube experiment can be brought into good agreement for the high base-to-acid ratios (similar to 100) relevant for this study. This confirms that nucleation proceeds at rates that are compatible with collision-controlled (a.k.a. kinetically controlled) NPF for the conditions during the CLOUD7 experiment (278 K, 38% relative humidity, sulfuric acid concentration between 1 x 10(6) and 3 x 10(7) cm(-3), and dimethylamine mixing ratio of similar to 40 pptv, i.e., 1 x 10(9) cm(-3)).Peer reviewe
- …