Design of a microwave radiometer for monitoring high voltage insulator contamination level

Microwave radiometry is a novel method for monitoring contamination levels on high voltage insulators. The microwave radiometer described measures energy emitted from the contamination layer and could provide a safe, reliable, contactless monitoring method that is effective under dry conditions. The design of the system has focused on optimizing accuracy, stability and sensitivity using a relatively low cost architecture. Experimental results demonstrate that the output from the radiometer is able to clearly distinguish between samples with different contamination levels under dry conditions. This contamination monitoring method could potentially provide advance warning of the future failure of wet insulators in climates where insulators can experience dry conditions for extended periods

Cryo-Scanning Electron Microscopy of Microorganisms in a Liquid Film on Spoiled Chicken Skin

Cryo-scanning electron microscopy was used to examine bacteria which had grown in a liquid film on the skin surface of poultry carcasses. Pits or void zones surrounding bacteria on ethanol-dehydrated, critical point dried (CPD) samples were not found on washed or untreated specimens frozen prior to examination by scanning electron microscopy (SEM). However, pits equivalent to those produced during chemical fixation and dehydration were formed when skin tissue was treated with ethanol prior to freezing. We conclude that the pits are dehydration artifacts caused by the chemical preparative methods employed rather than the result of degradation of film proteins by extracellular enzymes of microbial origin

Mapping the sensitivity of split ring resonators using a localized analyte

Split ring resonator (SRR) based metamaterials have frequently been demonstrated for use as optical sensors of organic materials. This is made possible by matching the wavelength of the SRR plasmonic resonance with a molecular resonance of a specific analyte, which is usually placed on top of the metal structure. However, systematic studies of SRRs that identify the regions that exhibit a high electric field strength are commonly performed using simulations. In this paper we demonstrate that areas of high electric field strength, termed “hot-spots,” can be found by localizing a small quantity of organic analyte at various positions on or near the structure. Furthermore, the sensitivity of the SRR to the localized analyte can be quantified to determine, experimentally, suitable regions for optical sensing

Quantitative microbiology: a basis for food safety.

Because microorganisms are easily dispersed, display physiologic diversity, and tolerate extreme conditions, they are ubiquitous and may contaminate and grow in many food products. The behavior of microbial populations in foods (growth, survival, or death) is determined by the properties of the food (e.g., water activity and pH) and the storage conditions (e.g., temperature, relative humidity, and atmosphere). The effect of these properties can be predicted by mathematical models derived from quantitative studies on microbial populations. Temperature abuse is a major factor contributing to foodborne disease; monitoring temperature history during food processing, distribution, and storage is a simple, effective means to reduce the incidence of food poisoning. Interpretation of temperature profiles by computer programs based on predictive models allows informed decisions on the shelf life and safety of foods. In- or on-package temperature indicators require further development to accurately predict microbial behavior. We suggest a basis for a "universal" temperature indicator. This article emphasizes the need to combine kinetic and probability approaches to modeling and suggests a method to define the bacterial growth/no growth interface. Advances in controlling foodborne pathogens depend on understanding the pathogens' physiologic responses to growth constraints, including constraints conferring increased survival capacity

Clinical effectiveness and cost-effectiveness of foot orthoses for people with established rheumatoid arthritis: an exploratory clinical trial

Objectives: Foot orthoses are commonly prescribed as an intervention for people with rheumatoid arthritis (RA). Data relating to the cost-effectiveness of foot orthoses in people with RA are limited. The aim was to evaluate the clinical and cost-effectiveness of two types of foot orthoses in people with established RA. Method: A single-blind randomized controlled trial was undertaken to compare custom-made foot orthoses (CMFOs) and simple insoles (SIs) in 41 people with established RA. The Foot Function Index (FFI) was used to measure foot pain, disability, and functional limitation. Costs were estimated from the perspective of the UK National Health Service (NHS), societal (patient and family) perspective, and secondary care resource use in terms of the intervention and staff time. Effects were assessed in terms of health gain expressed as quality-adjusted life years (QALYs). Results: At baseline, 20 participants received a CMFO and 21 participants received an SI. After 16 weeks foot pain improved in both the CMFOs (p = 0.000) and the SIs (p < 0.01). However, disability scores improved for CMFOs (p < 0.001) but not for SIs (p = 0.40). The cost-effectiveness results demonstrated no difference in cost between the arms (CMFOs: £159.10; SIs: £79.10; p = 0.35), with the CMFOs being less effective in terms of cost per QALY gain (p < 0.001). Conclusions: In people with established RA, semi-rigid customized foot orthoses can improve pain and disability scores in comparison to simple insoles. From a cost-effectiveness perspective, the customized foot orthoses were far more expensive to manufacture, with no significant cost per QALY gain

Cotinine-assessed second-hand smoke exposure and risk of cardiovascular disease in older adults

Objectives: To examine whether second-hand smoke (SHS) exposure measured by serum cotinine is associated with increased coronary heart disease (CHD) and stroke risk among contemporary older British adults. Design: Prospective population-based study with self-reported medical history and health behaviours. Fasting blood samples were analysed for serum cotinine and cardiovascular disease (CVD) risk markers. Setting: Primary care centres in 25 British towns in 1998–2001. Patients: 8512 60–79-year-old men and women selected from primary care registers. Main outcome measures: Fatal and non-fatal myocardial infarction (MI; n=445) and stroke (n=386) during median 7.8-year follow-up. Main exposure: Observational study of serum cotinine assayed from fasting blood sample using liquid chromatography tandem mass spectrometry method, and self-reported smoking history. Results: Among 5374 non-smokers without pre-existing CVD, geometric mean cotinine was 0.15 ng/ml (IQR 0.05–0.30). Compared with non-smokers with cotinine ≤0.05 ng/ml, higher cotinine levels (0.06–0.19, 0.2–0.7 and 0.71–15.0 ng/ml) showed little association with MI; adjusted HRs were 0.92 (95% CI 0.63 to 1.35), 1.07 (0.73 to 1.55) and 1.09 (0.69 to 1.72), p(trend)=0.69. Equivalent HRs for stroke were 0.82 (0.55 to 1.23), 0.74 (0.48 to 1.13) and 0.69 (0.41 to 1.17), p(trend)=0.065. The adjustment for sociodemographic, behavioural and CVD risk factors had little effect on the results. The HR of MI for smokers (1–9 cigarettes/day) compared with non-smokers with cotinine ≤0.05 ng/ml was 2.14 (1.39 to 3.52) and 1.03 (0.52 to 2.04) for stroke. Conclusions: In contemporary older men and women, SHS exposure (predominantly at low levels) was not related to CHD or stroke risks, but we cannot rule out the possibility of modest effects at higher exposure levels

Elective orthopaedic cancellations due to the COVID-19 pandemic: where are we now, and where are we heading?

Aims The primary aim is to estimate the current and potential number of patients on NHS England orthopaedic elective waiting lists by November 2020. The secondary aims are to model recovery strategies; review the deficit of hip and knee arthroplasty from National Joint Registry (NJR) data; and assess the cost of returning to pre-COVID-19 waiting list numbers. Methods A model of referral, waiting list, and eventual surgery was created and calibrated using historical data from NHS England (April 2017 to March 2020) and was used to investigate the possible consequences of unmet demand resulting from fewer patients entering the treatment pathway and recovery strategies. NJR data were used to estimate the deficit of hip and knee arthroplasty by August 2020 and NHS tariff costs were used to calculate the financial burden. Results By November 2020, the elective waiting list in England is predicted to be between 885,286 and 1,028,733. If reduced hospital capacity is factored into the model, returning to full capacity by November, the waiting list could be as large as 1.4 million. With a 30% increase in productivity, it would take 20 months if there was no hidden burden of unreferred patients, and 48 months if there was a hidden burden, to return to pre-COVID-19 waiting list numbers. By August 2020, the estimated deficits of hip and knee arthroplasties from NJR data were 18,298 (44.8%) and 16,567 (38.6%), respectively, compared to the same time period in 2019. The cost to clear this black log would be £198,811,335. Conclusion There will be up to 1.4 million patients on elective orthopaedic waiting lists in England by November 2020, approximate three-times the pre-COVID-19 average. There are various strategies for recovery to return to pre-COVID-19 waiting list numbers reliant on increasing capacity, but these have substantial cost implications. Cite this article: Bone Jt Open 2021;2(2):103–110

Perovskite-perovskite tandem photovoltaics with optimized bandgaps

We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs

Motivations for innovation in the built environment: new directions for research

Innovation in the built environment involves multiple actors with diverse motivations. Policy-makers find it difficult to promote changes that require cooperation from these numerous and dispersed actors and to align their sometimes divergent interests. Established research traditions on the economics and management of innovation pay only limited attention to stakeholder choices, engagement and motivation. This paper reviews the insights that emerge as research in these traditions comes into contact with work on innovation from sociological and political perspectives. It contributes by highlighting growing areas of research on user involvement in complex innovation, collective action, distributed innovation and transition management. To differing extents, these provide approaches to incorporate the motivations of different actors into theoretical understanding. These indicate new directions for research that promise to enrich understanding of innovation