Dynamics of canopy structure and light interception in Pinus elliottii stands, north Florida

In order to develop a model of the carbon cycle for mature slash pine (Pinus elliottii) stands in north Florida, we studied seasonal variation in leaf area index (LAI, allsided), aboveground biomass increment and litterfall, and light penetration through the forest canopy, over a 3-yr period. The primary approach to establishing monthly LAI included annual destructive analyses and monthly measurements of needle fall and elongation. Imagery from the Landsat Thematic Mapper (TM) and patterns of light penetration were also used in attempts to derive less arduous estimates; the TM imagery was most promising. LAIs ranged from 3.0 to 6.5 on control plots over the 3 yr, with repeated fertilization increasing maximum LAI by >40%. Seasonal variation was high (40%), as was variation from year to year. An average of 3 1% of the incident photosynthetically active radiation (PAR) penetrated the canopies annually, ranging from 18 to 42% seasonally. Seasonal light penetration could not be described using a simple application of the Beer-Lambert law, perhaps due to the highly aggregated nature of the canopies. Models incorporating more information on canopy structure are necessary to predict light penetration through slash pine stands accurately. A model of needle litterfall was derived that could account for much of the seasonal and annual variation using stand basal area and climate conditions from the spring of the previous year; this model may be useful for developing climate-driven predictions of LAI. Efficiencies of use of incoming and intercepted PAR were low compared to other forest types. Low light interception and high nutrient-use efficiencies (demonstrated in earlier studies) are important adaptive characteristics of slash pine stands to these relatively warm and nutrient-poor sites

Budget Processes: Theory and Experimental Evidence

This paper studies budget processes, both theoretically and experimentally. We compare the outcomes of bottom-up and top-down budget processes. It is often presumed that a top-down budget process leads to a smaller overall budget than a bottom-up budget process. Ferejohn and Krehbiel (1987) showed theoretically that this need not be the case. We test experimentally the theoretical predictions of their work. The evidence from these experiments lends strong support to their theory, both at the aggregate and the individual subject level

Alignment of Classroom Assessments with the Virginia Standards of Learning (SOL)

Parents, teachers, and school administrators all have one common goal — student success. Teachers have been trusted to impart knowledge to students, while hopefully fostering a love of learning, then assessing how much the students know. Assessment in the classroom, whether informal, formative, or summative, has been the major source of identifying student strengths and weaknesses. Today, many people believe that teachers must be accountable for what they do in the classroom. Within the educational system, students’ success has been measured inconsistently from state-to-state, district-to-district, and even classroom-to-classroom. In this age of accountability, national and state standards have been developed, and through state-wide assessments, students are tested on what they have learned. Each state is accountable to the United States Department of Education, administrators are accountable to their school district and state, and teachers are accountable to the administrators. Today, all American Students are expected to meet very specific standards. Teachers much assess their students’ knowledge and abilities through testing in the classroom

The Banks set and the Uncovered Set in budget allocation problems

We examine how a society chooses to divide a given budget among various regions, projects or individuals. In particular, we characterize the Banks set and the Uncovered Set in such problems. We show that the two sets can be proper subsets of the set of all alternatives, and at times are very pointed in their predictions. This contrasts with well-known "chaos theorems," which suggest that majority voting does not lead to any meaningful predictions when the policy space is multidimensional

The rise of policy coherence for development: a multi-causal approach

In recent years policy coherence for development (PCD) has become a key principle in international development debates, and it is likely to become even more relevant in the discussions on the post-2015 sustainable development goals. This article addresses the rise of PCD on the Western donors’ aid agenda. While the concept already appeared in the work of Organisation for Economic Co-operation and Development (OECD) in the early 1990s, it took until 2007 before PCD became one of the Organisation’s key priorities. We adopt a complexity-sensitive perspective, involving a process-tracing analysis and a multi-causal explanatory framework. We argue that the rise of PCD is not as contingent as it looks. While actors such as the EU, the DAC and OECD Secretariat were the ‘active causes’ of the rise of PCD, it is equally important to look at the underlying ‘constitutive causes’ which enabled policy coherence to thrive well

Quantitative localized proton-promoted dissolution kinetics of calcite using scanning electrochemical microscopy (SECM)

Scanning electrochemical microscopy (SECM) has been used to determine quantitatively the kinetics of proton-promoted dissolution of the calcite (101̅4) cleavage surface (from natural “Iceland Spar”) at the microscopic scale. By working under conditions where the probe size is much less than the characteristic dislocation spacing (as revealed from etching), it has been possible to measure kinetics mainly in regions of the surface which are free from dislocations, for the first time. To clearly reveal the locations of measurements, studies focused on cleaved “mirror” surfaces, where one of the two faces produced by cleavage was etched freely to reveal defects intersecting the surface, while the other (mirror) face was etched locally (and quantitatively) using SECM to generate high proton fluxes with a 25 μm diameter Pt disk ultramicroelectrode (UME) positioned at a defined (known) distance from a crystal surface. The etch pits formed at various etch times were measured using white light interferometry to ascertain pit dimensions. To determine quantitative dissolution kinetics, a moving boundary finite element model was formulated in which experimental time-dependent pit expansion data formed the input for simulations, from which solution and interfacial concentrations of key chemical species, and interfacial fluxes, could then be determined and visualized. This novel analysis allowed the rate constant for proton attack on calcite, and the order of the reaction with respect to the interfacial proton concentration, to be determined unambiguously. The process was found to be first order in terms of interfacial proton concentration with a rate constant k = 6.3 (± 1.3) × 10–4 m s–1. Significantly, this value is similar to previous macroscopic rate measurements of calcite dissolution which averaged over large areas and many dislocation sites, and where such sites provided a continuous source of steps for dissolution. Since the local measurements reported herein are mainly made in regions without dislocations, this study demonstrates that dislocations and steps that arise from such sites are not needed for fast proton-promoted calcite dissolution. Other sites, such as point defects, which are naturally abundant in calcite, are likely to be key reaction sites

Dual-barrel conductance micropipet as a new approach to the study of ionic crystal dissolution kinetics

A new approach to the study of ionic crystal dissolution kinetics is described, based on the use of a dual-barrel theta conductance micropipet. The solution in the pipet is undersaturated with respect to the crystal of interest, and when the meniscus at the end of the micropipet makes contact with a selected region of the crystal surface, dissolution occurs causing the solution composition to change. This is observed, with better than 1 ms time resolution, as a change in the ion conductance current, measured across a potential bias between an electrode in each barrel of the pipet. Key attributes of this new technique are: (i) dissolution can be targeted at a single crystal surface; (ii) multiple measurements can be made quickly and easily by moving the pipet to a new location on the surface; (iii) materials with a wide range of kinetics and solubilities are open to study because the duration of dissolution is controlled by the meniscus contact time; (iv) fast kinetics are readily amenable to study because of the intrinsically high mass transport rates within tapered micropipets; (v) the experimental geometry is well-defined, permitting finite element method modeling to allow quantitative analysis of experimental data. Herein, we study the dissolution of NaCl as an example system, with dissolution induced for just a few milliseconds, and estimate a first-order heterogeneous rate constant of 7.5 (±2.5) × 10–5 cm s–1 (equivalent surface dissolution flux ca. 0.5 μmol cm–2 s–1 into a completely undersaturated solution). Ionic crystals form a huge class of materials whose dissolution properties are of considerable interest, and we thus anticipate that this new localized microscale surface approach will have considerable applicability in the future

Statistical mechanics of voting

Decision procedures aggregating the preferences of multiple agents can produce cycles and hence outcomes which have been described heuristically as `chaotic'. We make this description precise by constructing an explicit dynamical system from the agents' preferences and a voting rule. The dynamics form a one dimensional statistical mechanics model; this suggests the use of the topological entropy to quantify the complexity of the system. We formulate natural political/social questions about the expected complexity of a voting rule and degree of cohesion/diversity among agents in terms of random matrix models---ensembles of statistical mechanics models---and compute quantitative answers in some representative cases.Comment: 9 pages, plain TeX, 2 PostScript figures included with epsf.tex (ignore the under/overfull \vbox error messages