Electrowetting of liquid marbles

Electrowetting of water drops on structured superhydrophobic surfaces are known to cause an irreversible change from a slippy (Cassie-Baxter) to a sticky (Wenzel) regime. An alternative approach to using a water drop on a superhydrophobic surface to obtain a non-wetting system is to use a liquid marble on a smooth solid substrate. A liquid marble is a droplet coated in hydrophobic grains, which therefore carries its own solid surface structure as a conformal coating. Such droplets can be considered as perfect non-wetting systems having contact angles to smooth solid substrates of close to 180 degrees. In this work we report the electrowetting of liquid marbles made of water coated with hydrophobic lycopodium grains and show that the electrowetting is completely reversible. Marbles are shown to return to their initial contact angle for both ac and dc electrowetting and without requiring a threshold voltage to be exceeded. Furthermore, we provide a proof-of-principle demonstration that controlled motion of marbles on a finger electrode structure is possible

Dielectrophoresis-Driven Spreading of Immersed Liquid Droplets

In recent years electrowetting-on-dielectric (EWOD) has become an effective tool to control partial wetting. EWOD uses the liquid−solid interface as part of a capacitive structure that allows capacitive and interfacial energies to adjust by changes in wetting when the liquid−solid interface is charged due to an applied voltage. An important aspect of EWOD has been its applications in micro fluidics in chemistry and biology and in optical devices and displays in physics and engineering. Many of these rely on the use of a liquid droplet immersed in a second liquid due to the need either for neutral buoyancy to overcome gravity and shield against impact shocks or to encapsulate the droplet for other reasons, such as in microfluidic-based DNA analyses. Recently, it has been shown that nonwetting oleophobic surfaces can be forcibly wetted by nonconducting oils using nonuniform electric fields and an interface-localized form of liquid dielectrophoresis (dielectrowetting). Here we show that this effect can be used to create films of oil immersed in a second immiscible fluid of lower permittivity. We predict that the square of the thickness of the film should obey a simple law dependent on the square of the applied voltage and with strength dependent on the ratio of difference in permittivity to the liquid-fluid interfacial tension, Δε/γLF. This relationship is experimentally confirmed for 11 liquid−air and liquid−liquid combinations with Δε/γLF having a span of more than two orders of magnitude. We therefore provide fundamental understanding of dielectrowetting for liquid-in-liquid systems and also open up a new method to determine liquid−liquid interfacial tensions

Embryonic Pattern Scaling Achieved by Oppositely Directed Morphogen Gradients

Morphogens are proteins, often produced in a localised region, whose concentrations spatially demarcate regions of differing gene expression in developing embryos. The boundaries of expression must be set accurately and in proportion to the size of the one-dimensional developing field; this cannot be accomplished by a single gradient. Here, we show how a pair of morphogens produced at opposite ends of a developing field can solve the pattern-scaling problem. In the most promising scenario, the morphogens effectively interact according to the annihilation reaction $A+B\to\emptyset$ and the switch occurs according to the absolute concentration of $A$ or $B$. In this case embryonic markers across the entire developing field scale approximately with system size; this cannot be achieved with a pair of non-interacting gradients that combinatorially regulate downstream genes. This scaling occurs in a window of developing-field sizes centred at a few times the morphogen decay length.Comment: 24 pages; 11 figures; uses iopar

You’re the emotional one: the role of perspective for emotion processing in reading comprehension

Two experiments were conducted to explore whether perspective influences the way readers engage with and process emotional information while reading. Texts presenting characters in an emotional situation from either a personal or an onlooker perspective were presented and reading times were measured for each sentence. Participants also provided emotional self-ratings after reading. In the first experiment, positive texts were processed with greater ease, especially when readers experienced the texts from a personal perspective. In Experiment 2, an emotional match/mismatch was inserted so that a final explicit emotion word either matched or mismatched the emotional valence of the text. Mismatch effects were stronger and more consistent for the personal perspective. The two experiments provide evidence that the perspective of the reader can influence emotion processing. Processing of emotional information was easier for the personal perspective, and readers were more sensitive to inconsistent emotional information from that perspective

Experiences With Parents and Youth Physical Health Symptoms and Cortisol: A Daily Diary Investigation

Using daily diary data, this study examined the associations between positive and negative parent-youth experiences and youth cortisol and physical health symptoms among a sample of adolescents (N=132, Mean Age = 13.39). On days when girls reported more negative experiences than usual, they exhibited more physical health symptoms and flatter evening cortisol slopes than usual. Negative experiences with mothers were associated with higher dinner and bedtime youth cortisol levels (between-person). Daily positive experiences with fathers were linked with lower dinner cortisol levels. Youth with high levels of negative experiences, on average, were less sensitive to daily variation in negative experiences than youth who experienced lower parental negativity. We discuss the benefits of a daily diary approach

Surface Acoustic Waves to Control Droplet Impact onto Superhydrophobic and Slippery Liquid-Infused Porous Surfaces

Superhydrophobic coatings and slippery liquid-infused porous surfaces (SLIPS) have shown their potentials in self-cleaning, anti-icing, anti-erosion, and antibiofouling applications. Various studies have been done on controlling the droplet impact on such surfaces using passive methods such as modifying the lubricant layer thickness in SLIPS. Despite their effectiveness, passive methods lack on-demand control over the impact dynamics of droplets. This paper introduces a new method to actively control the droplet impact onto superhydrophobic and SLIPS surfaces using surface acoustic waves (SAWs). In this study, we designed and fabricated SLIPS on ZnO/aluminum thin-film SAW devices and investigated different scenarios of droplet impact on the surfaces compared to those on similar superhydrophobic-coated surfaces. Our results showed that SAWs have insignificant influences on the impact dynamics of a porous and superhydrophobic surface without an infused oil layer. However, after infusion with oil, SAW energy could be effectively transferred to the droplet, thus modifying its impact dynamics onto the superhydrophobic surface. Results showed that by applying SAWs, the spreading and retraction behaviors of the droplets are altered on the SLIPS surface, leading to a change in a droplet impact regime from deposition to complete rebound with altered rebounding angles. Moreover, the contact time was reduced up to 30% when applying SAWs on surfaces with an optimum oil lubricant thickness of ∼8 μm. Our work offers an effective way of applying SAW technology along with SLIPS to effectively reduce the contact time and alter the droplet rebound angles

Revisiting strategies for breeding anthracnose resistance in lentil: the case with wild species

Non-Peer ReviewedBreeders at the Crop Development Centre (CDC) have up to now only used germplasm resources available in the cultivated lentil to develop new varieties with resistance to diseases. Based on recent studies, the available cultivated germplasm does not offer sufficient genetic variation for resistance to anthracnose and ascochyta diseases. Lentil crop is attacked by two major diseases (anthracnose and ascochyta) that can cause 100% loss in the worst scenarios. Since anthracnose is only a major lentil disease in North America, no work has been done to improve resistance to this disease elsewhere. Wild species of many crops are known to carry many disease resistance genes lacking in the cultivated crop. We began the search for anthracnose resistance in the six wild species of lentil (world collection), of which two can be easily crossed with the cultivated type. Two strains of anthracnose (race 1 and race 2) with varying degrees of virulence were reported. The 2002 field data suggested that some of the Lens ervoides and Lens lamottei accessions exhibited no lesions at all when exposed to the combination of the two anthracnose strains. The cultivated types that show resistance to the less virulent strain were severely affected by anthracnose. In the greenhouse study the wild species were inoculated with the two strains separately and results indicate that no accession is immune to the more virulent type. However, some of the L. ervoides and L. lamottei accessions had good resistance compared to their cultivated counterparts. As a long term strategy, the lentil breeding program at CDC, University of Saskatchewan has a goal of fully utilizing the available resistance sources. However, these two species cannot be easily crossed with the cultivated types using the conventional/manual crossing techniques. A tissue culture procedure involving embryo rescue is used to facilitate crossing. We have been able to successfully rescue some embryos from crosses with Lens ervoides. The hybrid plants produce some fertile seeds which will be evaluated for resistance to both anthracnose and ascochyta. The selected resistant lines will then be backcrossed to the adopted backgrounds in order to deploy resistance genes

Schottky barrier formation at the Au to rare earth doped GaN thin film interface

The Schottky barriers formed at the interface between gold and various rare earth doped GaN thin films (RE = Yb, Er, Gd) were investigated in situ using synchrotron photoemission spectroscopy. The resultant Schottky barrier heights were measured as 1.68 ± 0.1 eV (Yb:GaN), 1.64 ± 0.1 eV (Er:GaN), and 1.33 ± 0.1 eV (Gd:GaN). We find compelling evidence that thin layers of gold do not wet and uniformly cover the GaN surface, even with rare earth doping of the GaN. Furthermore, the trend of the Schottky barrier heights follows the trend of the rare earth metal work function

Chain transfer to solvent in the radical polymerization of structurally diverse acrylamide monomers using straight-chain and branched alcohols as solvents

Chain transfer to solvent in conventional radical polymerizations of N-tert-butylacrylamide (TBAM) and N-(2-morpholin-4-ylethyl) acrylamide (MEA) in a range of alcohol solvents is investigated. Mayo analysis of polymerization of TBAM in linear alcohols (C-3-C-9) resulted in an approximately linear increase in chain transfer to solvent constant (C-tr,(S)) with the number of methylene (CH2) units in the solvent. The branched alcohol 3-methyl-3-pentanol gave the smallest C-tr,C-S (using Mayo analysis), and thus allowed attainment of higher molecular weights (MWs) in the nitroxide-mediated polymerizations (NMP) of TBAM. Overall, the data show that MEA is more prone to chain transfer to solvent than TBAM (higher C-tr,C-S), and further analysis of the conventional radical polymerization of MEA in 3-methyl-3-pentanol indicate chain transfer to monomer may also be occurring. The first controlled/ living polymerizations of MEA are detailed with chain transfer having a greater impact on maximum achievable MWs in NMP in comparison to TBAM

Was facial width-to-height ratio subject to sexual selection pressures? A life course approach

Sexual selection researchers have traditionally focused on adult sex differences; however, the schedule and pattern of sex-specific ontogeny can provide insights unobtainable from an exclusive focus on adults. Recently, it has been debated whether facial width-to-height ratio (fWHR; bi-zygomatic breadth divided by midface height) is a human secondary sexual characteristic (SSC). Here, we review current evidence, then address this debate using ontogenetic evidence, which has been under-explored in fWHR research. Facial measurements were collected from 3D surface images of males and females aged 3 to 40 (Study 1; US European-descent, n = 2449), and from 2D photographs of males and females aged 7 to 21 (Study 2; Bolivian Tsimane, n = 179), which were used to calculate three fWHR variants (which we call fWHRnasion, fWHRstomion, and fWHRbrow) and two other common facial masculinity ratios (facial width-to-lower-face-height ratio, fWHRlower, and cheekbone prominence). We test whether the observed pattern of facial development exhibits patterns indicative of SSCs, i.e., differential adolescent growth in either male or female facial morphology leading to an adult sex difference. Results showed that only fWHRlower exhibited both adult sex differences as well as the classic pattern of ontogeny for SSCs—greater lower-face growth in male adolescents relative to females. fWHRbrow was significantly wider among both pre- and post-pubertal males in the Bolivian Tsimane sample; post-hoc analyses revealed that the effect was driven by large sex differences in brow height, with females having higher placed brows than males across ages. In both samples, all fWHR measures were inversely associated with age; that is, human facial growth is characterized by greater relative elongation in the mid-face and lower face relative to facial width. This trend continues even into middle adulthood. BMI was also a positive predictor of most of the ratios across ages, with greater BMI associated with wider faces. Researchers collecting data on fWHR should target fWHRlower and fWHRbrow and should control for both age and BMI. Researchers should also compare ratio approaches with multivariate techniques, such as geometric morphometrics, to examine whether the latter have greater utility for understanding the evolution of facial sexual dimorphism