1,944 research outputs found
A parallel-plate flow chamber to study initial cell adhesion on a nanofeatured surface
Cells in the human body come across many types of information, which they respond to. Both material chemistry and topography of the surface where they adhere have an effect on cell shape, proliferation, migration, and gene expression. It is possible to create surfaces with topography at the nanometric scale to allow observation of cell-topography interactions. Previous work has shown that 100-nm-diameter pits on a 300-nm pitch can have a marked effect in reducing the adhesion of rat fibroblasts in static cultures. In the present study, a flow of cell suspension was used to investigate cell adhesion onto nanopits in dynamic conditions, by means of a parallel-plate flow chamber. A flow chamber with inner nanotopography has been designed, which allows real-time observation of the flow over the nanopits. A nanopitted pattern was successfully embossed into polymethylmethacrylate to meet the required shape of the chamber. Dynamic cell adhesion after 1 h has been quantified and compared on flat and nanopitted polymethylmethacrylate substrates. The nanopits were seen to be significantly less adhesive than the flat substrates (p<0.001), which is coherent with previous observations of static cultures
Advanced natural laminar flow airfoil with high lift to drag ratio
An experimental verification of a high performance natural laminar flow (NLF) airfoil for low speed and high Reynolds number applications was completed in the Langley Low Turbulence Pressure Tunnel (LTPT). Theoretical development allowed for the achievement of 0.70 chord laminar flow on both surfaces by the use of accelerated flow as long as tunnel turbulence did not cause upstream movement of transition with increasing chord Reynolds number. With such a rearward pressure recovery, a concave type deceleration was implemented. Two-dimensional theoretical analysis indicated that a minimum profile drag coefficient of 0.0026 was possible with the desired laminar flow at the design condition. With the three-foot chord two-dimensional model constructed for the LTPT experiment, a minimum profile drag coefficient of 0.0027 was measured at c sub l = 0.41 and Re sub c = 10 x 10 to the 6th power. The low drag bucket was shifted over a considerably large c sub l range by the use of the 12.5 percent chord trailing edge flap. A two-dimensional lift to drag ratio (L/D) was 245. Surprisingly high c sub l max values were obtained for an airfoil of this type. A 0.20 chort split flap with 60 deg deflection was also implemented to verify the airfoil's lift capabilities. A maximum lift coefficient of 2.70 was attained at Reynolds numbers of 3 and 6 million
Recommended from our members
Immunoregulatory functions for murine intraepithelial lymphocytes: gamma/delta T cell receptor-positive (TCR+) T cells abrogate oral tolerance, while alpha/beta TCR+ T cells provide B cell help.
Past work has shown that a subset of effector T cells with unique characteristics could abrogate hapten- or antigen-induced tolerance, and the reconstitution of this immune response has been termed contrasuppression. We have studied contrasuppression in a model of oral tolerance (OT) in which adoptively transferred antigen-specific T contrasuppressor (Tcs) cells reverse OT and result in antibody responses to the eliciting antigen. In the present study, we show that murine intraepithelial lymphocytes (IELs) from mice orally immunized with sheep red blood cells (SRBC) contain T cells that exhibit Tcs cell activity. This effect was mediated by CD3+ gamma/delta T cell receptor-positive (TCR+), but not alpha/beta TCR+ T cells, and gamma/delta TCR+ Tcs cells were associated with both the CD4-,CD8+ and CD4-,CD8- (double-negative) IEL fractions. The CD4-,CD8+ gamma/delta TCR+ IELs were further separated into Vicia villosa-adherent and -nonadherent fractions. Adoptive transfer of V. villosa-adherent gamma/delta TCR+ T cells to mice with OT to SRBC resulted in splenic IgA, IgM, and IgG subclass anti-SRBC responses, while V. villosa-nonadherent gamma/delta TCR+ T cells were without activity. The gamma/delta TCR+ IELs did not support in vitro antibody responses in B cell cultures, while alpha/beta TCR+ IELs were effective T helper cells. Further, cytokine production by the gamma/delta TCR+ IELs was examined, and the gamma/delta TCR+ V. villosa-adherent fraction, which possessed contrasuppressor function, contained low levels of IL-5 mRNA and small numbers of IL-5-producing cells when compared with alpha/beta TCR+ IELs and V. villosa-nonadherent gamma/delta TCR+ IELs. Our results now show that mouse IELs contain two distinct types of T cells that function in the immune response, e.g., alpha/beta TCR+ T cells that produce IL-5 and function as helper cells, and gamma/delta TCR+ T cells that restore antibody responses in mice that had been orally tolerized with antigen
Fuel conservative guidance concept for shipboard landing of powered-life aircraft
A simulation study was undertaken to investigate the application of energy conservative guidance (ECG) software, developed at NASA Ames Research Center, to improve the time and fuel efficiency of powered lift airplanes operating from aircraft carriers at sea. When a flightpath is indicated by a set of initial conditions for the aircraft and a set of positional waypoints with associated airspeeds, the ECG software synthesizes the necessary guidance commands to optimize fuel and time along the specified path. A major feature of the ECG system is the ability to synthesize a trajectory that will allow the aircraft to capture the specified path at any waypoint with the desired heading and airspeed from an arbitrary set of initial conditions. Five paths were identified and studied. These paths demonstrate the ECG system's ability to save flight time and fuel by more efficiently managing the aircraft's capabilities. Results of this simulation study show that when restrictions on the approach flightpath imposed for manual operation are removed completely, fuel consumption during the approach was reduced by as much as 49% (610 lb fuel) and the time required to fly the flightpath was reduced by as much as 41% (5 min). Savings due to ECG were produced by: (1) shortening the total flight time; (2) keeping the airspeed high as long as possible to minimize time spent flying in a regime in which more engine thrust is required for lift to aid the aerodynamic lift; (3) minimizing time spent flying at constant altitude at slow airspeeds; and (4) synthesizing a path from any location for a direct approach to landing without entering a holding pattern or other fixed approach path
Experimental Results for a Flapped Natural-laminar-flow Airfoil with High Lift/drag Ratio
Experimental results have been obtained for a flapped natural-laminar-flow airfoil, NLF(1)-0414F, in the Langley Low-Turbulence Pressure Tunnel. The tests were conducted over a Mach number range from 0.05 to 0.40 and a chord Reynolds number range from about 3.0 x 10(6) to 22.0 x 10(6). The airfoil was designed for 0.70 chord laminar flow on both surfaces at a lift coefficient of 0.40, a Reynolds number of 10.0 x 10(6), and a Mach number of 0.40. A 0.125 chord simple flap was incorporated in the design to increase the low-drag, lift-coefficient range. Results were also obtained for a 0.20 chord split-flap deflected 60 deg
Low-speed aerodynamic characteristics of a 9.3-percent-thick supercritical airfoil section
An investigation was conducted in the Langley low turbulence pressure tunnel to determine the low-speed, two dimensional characteristics of a 9.3 percent-thick supercritical airfoil. The airfoil was tested at Reynolds numbers (based on chord) from 2.9 million to 16.8 million, at Mach numbers from 0.10 to 0.36, and at geometric angles of attack from -8 degrees to 14 degrees
Wind tunnel results of the low-speed NLF(1)-0414F airfoil
The large performance gains predicted for the Natural Laminar Flow (NLF)(1)-0414F airfoil were demonstrated in two-dimensional airfoil tests and in wind tunnel tests conducted with a full scale modified Cessna 210. The performance gains result from maintaining extensive areas of natural laminar flow, and were verified by flight tests conducted with the modified Cessna. The lift, stability, and control characteristics of the Cessna were found to be essentially unchanged when boundary layer transition was fixed near the wing leading edge. These characteristics are very desirable from a safety and certification view where premature boundary layer transition (due to insect contamination, etc.) must be considered. The leading edge modifications were found to enhance the roll damping of the Cessna at the stall, and were therefore considered effective in improving the stall/departure resistance. Also, the modifications were found to be responsible for only minor performance penalties
Low-speed aerodynamic characteristics of a 16-percent-thick variable-geometry airfoil designed for general aviation applications
Tests were conducted in the Langley low-turbulence pressure tunnel to determine the aerodynamic characteristics of climb, cruise, and landing configurations. These tests were conducted over a Mach number range from 0.10 to 0.35, a chord Reynolds number range from 2.0 x 1 million to 20.0 x 1 million, and an angle-of-attack range from -8 deg to 20 deg. Results show that the maximum section lift coefficients increased in the Reynolds number range from 2.0 x 1 million to 9.0 x 1 million and reached values of approximately 2.1, 1.8, and 1.5 for the landing, climb, and cruise configurations, respectively. Stall characteristics, although of the trailing-edge type, were abrupt. The section lift-drag ratio of the climb configuration with fixed transition near the leading edge was about 78 at a lift coefficient of 0.9, a Mach number of 0.15, and a Reynolds number of 4.0 x 1 million. Design lift coefficients of 0.9 and 0.4 for the climb and cruise configurations were obtained at the same angle of attack, about 6 deg, as intended. Good agreement was obtained between experimental results and the predictions of a viscous, attached-flow theoretical method
Recommended from our members
Pricing of reinsurance contracts in the presence of catastrophe bonds
A methodology for pricing of reinsurance contracts in the presence of a catastrophe bond is developed. An important advantage of this approach is that it allows for the pricing of reinsurance contracts consistent with the observed market prices of catastrophe bonds on the same underlying risk process. Within the proposed methodology, an appropriate financial pricing formula is derived, under a market implied risk neutral probability measure for both a catastrophe bond and an aggregate excess of loss reinsurance contract, using a generalised Fourier transform. Efficient numerical methods for the evaluation of this formula, such as the Fast Fourier transform and Fractional Fast Fourier transform, are considered. The methodology is illustrated on several examples including Pareto and Gamma claim severities
Development of an inducible mouse model of iRFP713 to track recombinase activity and tumour development in vivo
While the use of bioluminescent proteins for molecular imaging is a powerful technology to further our understanding of complex processes, fluorescent labeling with visible light fluorescent proteins such as GFP and RFP suffers from poor tissue penetration and high background autofluorescence. To overcome these limitations, we generated an inducible knock-in mouse model of iRFP713. This model was used to assess Cre activity in a Rosa Cre-ER background and quantify Cre activity upon different tamoxifen treatments in several organs. We also show that iRFP can be readily detected in 3D organoid cultures, FACS analysis and in vivo tumour models. Taken together we demonstrate that iRFP713 is a progressive step in in vivo imaging and analysis that widens the optical imaging window to the near-infrared spectrum, thereby allowing deeper tissue penetration, quicker image acquisition without the need to inject substrates and a better signal to background ratio in genetically engineered mouse models (GEMMs)
- …