3,414 research outputs found
Intentional interim ministry : another tool for church revitalization
https://place.asburyseminary.edu/ecommonsatsdissertations/2625/thumbnail.jp
Lunar Glovebox Balance with Wireless Technology
The most important equipment required for processing lunar samples is a high-quality mass balance for maintaining accurate weight inventory, security, and scientific study. After careful review, a Curation Office memo by Michael Duke in 1978 chose the Mettler PL200 to be used for sample weight measurements inside the gloveboxes (Fig. 3). These commercial off-the-shelf (COTS) balances did not meet the strict accepted material requirements in the Lunar lab. As a result, each balance housing, weighing pan, and wiring was custom retrofitted to meet Lunar Operating Procedure (LOP) 54 requirements [for material construction restrictions]. The original design drawings for the custom housings, readout support stands, and wiring were done by the JSC engineering directorate. The 1977- 1978 schematics, drawings, and files are now housed in the curation Data Center. Per the design specifications, the housing was fabricated from aluminum grade 6061 T6, seamless welds, and anodized per MIL-A-8625 type I, class I. The balance feet were TFE Teflon and any required joints were sealed with Viton A gaskets. The readout display and support stands outside the glovebox were fabricated from 300 series stainless steel with #4 finish and mounted to the glovebox with welded bolts. Wire harnesses that linked the balance with the outside display and power were encapsulated with TFE Teflon and transported through custom Deutsch wire bulk head pass-through systems from inside to outside the glovebox. These Deutsch connectors were custom fabricated with 316L stainless steel bodies, Viton A O-rings, aluminum 6061 with electroless nickel plating, Teflon (replacing the silicone), and gold crimp connectors (no soldering). Many of the Deutsch connectors may have been used in the Apollo program high vacuum complex in building 37 and date to about 1968 to 1970
Preparing to Receive and Handle Martian Samples When They Arrive on Earth
The Astromaterials Acquisition and Curation Office at NASA Johnson Space Center (JSC) is responsible for curating all of NASA's extraterrestrial samples. Under the governing document, NASA Policy Directive (NPD) 7100.10F+ derivative NPR 'Curation of Extraterrestrial Materials', JSC is charged with 'The curation of all extraterrestrial material under NASA control, including future NASA missions. 'The Directive goes on to define Curation as including'...documentation, preservation, preparation, and distribution of samples for research, education, and public outreach.
Apatite-Melt Partitioning of Volatiles in Basaltic Systems: Implications for Determining Volatile Abundances in Planetary Bodies from Apatite
Apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials, and due to the presence of volatiles within its crystal structure (X-site), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources [i.e., 1]. Experimental studies have investigated the apatite-melt partitioning behavior of F, Cl, and OH in basaltic systems [e.g., 2- 3], reporting that apatite-melt partitioning of volatiles is best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, exchange coefficients may vary as a function of temperature, pressure, melt composition, and/or oxygen fugacity. Furthermore, exchange coefficients may vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite [3]. In these regions of ternary space, we anticipate that crystal chemistry could influence partitioning behavior. Consequently, we conducted experiments to investigate the effect of apatite crystal chemistry on apatite-melt partitioning of F, Cl, and OH
Using Simulated Micrometeoroid Impacts to Understand the Progressive Space Weathering of the Surface of Mercury
The surfaces of airless bodies such as Mercury are continually modified by space weathering, which is driven by micrometeoroid impacts and solar wind irradiation. Space weathering alters the chemical composition, microstructure, and spectral properties of surface regolith. In lunar and ordinarychondritic style space weathering, these processes affect the reflectance properties by darkening (lowering of reflectance), reddening (increasing reflectance with increasing wavelength), and attenuation of characteristic absorption features. These optical changes are driven by the production of nanophase Febearing particles (npFe). While our understanding of these alteration processes has largely been based on data from the Moon and near-Earth S-type asteroids, the space weathering environment at Mercury is much more extreme. The surface of Mercury experiences a more intense solar wind flux and higher velocity micrometeoroid impacts than its planetary counterparts at 1 AU. Additionally, the composition of Mercurys surface varies significantly from that of the Moon. Most notably, a very low albedo unit has been identified on Mercurys surface, known as the low reflectance material (LRM). This unit is enriched with up to 4 wt.% carbon, likely in the form of graphite, over the local mean. In addition, the surface concentration of Fe across Mercurys surface is low (<2 wt.%) compared to the Moon. Our understanding of how these low-Fe and carbon phases are altered as a result of space weathering processes is limited. Since Fe plays a critical role in the development of space weathering features on other airless surfaces (e.g., npFe), its limited availability on Mercury may strongly affect the space weathering features in surface materials. In order to understand how space weathering affects the chemical, microstructural, and optical properties of the surface of Mercury, we can simulate these processes in the laboratory [7]. Here we used pulsed laser irradiation to simulate the short duration, high temperature events associated with micrometeoroid impacts. We used forsteritic olivine, likely present on the Mercurian surface, with varying FeO contents, each mixed with graphite, in our experiments. We then performed reflectance spectroscopy and electron microscopy to investigate the spectral, chemical, and microstructural changes in these samples
The Oxidation State of Sulfur in Lunar Apatite
Lunar apatites contain hundreds to thousands of parts per million of sulfur. This is puzzling because lunar basalts are thought to form in low oxygen fugacity (f(sub O2)) conditions where sulfur can only exist in its reduced form (S2()), a substitution not previously observed in natural apatite. We present measurements of the oxidation state of S in lunar apatites and associated mesostasis glass that show that lunar apatites and glass contain dominantly S2(), whereas natural apatites from Earth are only known to contain S6+. It is likely that many terrestrial and martian igneous rocks contain apatites with mixed sulfur oxidation states. The S6(+)/S2() ratios of such apatites could be used to quantify the f(sub O2) values at which they crystallized, given information on the portioning of S6(+) and S2() between apatite and melt and on the S6(+)/S2() ratios of melts as functions of f(sub O2) and melt composition. Such a well-calibrated oxybarometer based on this the oxidation state of S in apatite would have wide application
How Well Does the Present Surface Inventory of Water on Mars Constrain the Past?
Over the past 40 years, estimates of the total outgassed inventory of water on Mars have ranged from a global equivalent layer (GEL) approximately 7-1000 m deep. However, Carr and Head have recently argued that it is not the total inventory of outgassed water that is important, but the amount that exists in climatically exchangeable surface and near surface reservoirs - suggesting that any exchange with water in the deep subsurface is precluded by the existence of a thick cryosphere, at least during the Amazonian and Hesperian. Based on this assumption and their estimate of the present day near-surface inventory of H2O (approximately 34 m GEL, stored as ice in the polar layered deposits (PLD), lobate debris aprons, ice-rich latitude dependent mantles, and as shallow ground ice), they extrapolate the evolution of this inventory backward in time, taking into account the introduction of new water by volcanism, outflow channel activity, and the loss of water by exospheric escape. They conclude that, at the end of the Noachian, Mars had a near-surface water inventory of approximately 24 m and approximately 62 m by the end of the Hesperian - inventories that Carr and Head argue were incompatible with the existence of a former ocean
Phosphate minerals in the H group of ordinary chondrites, and fluid activity recorded by apatite heterogeneity in the Zag H3-6 regolith breccia
Phosphate minerals in ordinary chondrites provide a record of fluids that were present during metamorphic heating of the chondrite parent asteroids. We have carried out a petrographic study of the phosphate minerals, merrillite and apatite, in metamorphosed H group ordinary chondrites of petrologic type 4–6, to understand development of phosphate minerals and associated fluid evolution during metamorphism. In unbrecciated chondrites, apatite is Cl rich and shows textural evolution from fine-grained apatite-merrillite assemblages in type 4 toward larger, uniform grains in type 6. The Cl/F ratio in apatite shows a similar degree of heterogeneity in all petrologic types, and no systematic change in compositions with metamorphic grade, which suggests that compositions in each meteorite are dictated by localized conditions, possibly because of a limited fluid/rock ratio. The development of phosphate minerals in H chondrites is similar to that of L and LL chondrites, despite the fact that feldspar equilibration resulting from albitization is complete in H4 chondrites but not in L4 or LL4 chondrites. This suggests that albitization took place during an earlier period of the metamorphic history than that recorded by preserved apatite compositions, and chemical equilibrium was not achieved throughout the H chondrite parent body or bodies during the late stages of metamorphism. A relict igneous clast in the H5 chondrite, Oro Grande has apatite rims on relict phenocrysts of (possibly) diopside that have equilibrated with the host chondrite. Apatite in the Zag H3–6 regolith breccia records a complex fluid history, which is likely related to the presence of halite in this meteorite. The porous dark H4 matrix of Zag, where halite is observed, has a high apatite/merrillite ratio, and apatite is extremely Cl rich. One light H6 clast contains similarly Cl-rich apatite. In a second light H6 clast, apatite compositions are very heterogeneous and more F-rich. Apatites in both H4 matrix and H6 clasts have very low H_2O contents. Heterogeneous apatite compositions in Zag record multiple stages of regolith processing and shock at the surface of the H chondrite parent body, and apatite records either the passage of fluids of variable compositions resulting from different impact-related processes, or the passage of a single fluid whose composition evolved as it interacted with the chondrite regolith. Unraveling the history of apatite can potentially help to interpret the internal structure of chondrite parent bodies, with implications for physical and mechanical properties of chondritic asteroids. The behavior of halogens recorded by apatite is important for understanding the behavior of volatile elements in general: if impact-melt materials close to the surface of a chondritic asteroid are readily degassed, the volatile inventories of terrestrial planets could be considerably more depleted than the CI carbonaceous chondrite abundances that are commonly assumed
Applicability and Utility of the Astromaterials X-Ray Computed Tomography Laboratory at Johnson Space Center
The Astromaterials Acquisition and Curation Office at NASAs Johnson Space Center is responsible for curating all of NASAs astromaterial sample collections (i.e. Apollo samples, Luna Samples, Antarctic Meteorites, Cosmic Dust Particles, Microparticle Impact Collection, Genesis solar wind atoms, Stardust comet Wild-2 particles, Stardust interstellar particles, and Hayabusa asteroid Itokawa particles) [1-3]. To assist in sample curation and distribution, JSC Curation has recently installed an X-ray computed tomography (XCT) scanner to visualize and characterize samples in 3D. [3] describes the instrumental set-up and the utility of XCT to astromaterials curation. Here we describe some of the current and future projects and illustrate the usefulness of XCT in studying astromaterials
Advanced Curation Activities at NASA: Preparing to Receive, Process, and Distribute Samples Returned from Future Missions
The Astromaterials Acquisition and Curation Office (henceforth referred to herein as NASA Curation Office) at NASA Johnson Space Center (JSC) is responsible for curating all of NASA's extraterrestrial samples. Under the governing document, NASA Policy Directive (NPD) 7100.10F JSC is charged with curation of all extraterrestrial material under NASA control, including future NASA missions. The Directive goes on to define Curation as including documentation, preservation, preparation, and distribution of samples for research, education, and public outreach. Here we briefly describe NASA's astromaterials collections and our ongoing efforts related to enhancing the utility of our current collections as well as our efforts to prepare for future sample return missions. We collectively refer to these efforts as advanced curation
- …