1,221 research outputs found
Analysis, design and testing of high pressure waterjet nozzles
The Hydroblast Research Cell at MSFC is both a research and a processing facility. The cell is used to investigate fundamental phenomena associated with waterjets as well as to clean hardware for various NASA and contractor projects. In the area of research, investigations are made regarding the use of high pressure waterjets to strip paint, grease, adhesive and thermal spray coatings from various substrates. Current industrial methods of cleaning often use ozone depleting chemicals (ODC) such as chlorinated solvents, and high pressure waterjet cleaning has proven to be a viable alternative. Standard methods of waterjet cleaning use hand held or robotically controlled nozzles. The nozzles used can be single-stream or multijet nozzles, and the multijet nozzles may be mounted in a rotating head or arranged in a fan-type shape. We consider in this paper the use of a rotating, multijet, high pressure water nozzle which is robotically controlled. This method enables rapid cleaning of a large area, but problems such as incomplete coverage (e.g. the formation of 'islands' of material not cleaned) and damage to the substrate from the waterjet have been observed. In addition, current stripping operations require the nozzle to be placed at a standoff distance of approximately 2 inches in order to achieve adequate performance. This close proximity of the nozzle to the target to be cleaned poses risks to the nozzle and the target in the event of robot error or the striking of unanticipated extrusions on the target surface as the nozzle sweeps past. Two key motivations of this research are to eliminate the formation of 'coating islands' and to increase the allowable standoff distance of the nozzle
Design of high pressure waterjet nozzles
The Hydroblast Research Cell at Marshall Space Flight Center is used to investigate the use of high pressure waterjets to strip paint, grease, adhesive and thermal spray coatings from various substrates. Current methods of cleaning often use ozone depleting chemicals (ODC) such as chlorinated solvents. High pressure waterjet cleaning has proven to be a viable alternative to the use of solvents. A popular method of waterjet cleaning involves the use of a rotating, multijet, high pressure water nozzle which is robotically controlled. This method enables rapid cleaning of a large area, but problems such as incomplete coverage and damage to the substrate from the waterjet have been observed. This report summarizes research consisting of identifying and investigating the basic properties of rotating, multijet, high pressure water nozzles, and how particular designs and modes of operation affect such things as stripping rate, standoff distance and completeness of coverage. The study involved computer simulations, an extensive literature review, and experimental studies of different nozzle designs
Natural and anthropogenic sources of total suspended particulate and their contribution to the formation of black crusts on building stone materials of Catania (Sicily)
Blackening and disaggregation of exposed surfaces of stone monuments are well-known effects of stone decay taking place in polluted urban environments all over the world. This paper aims to assess the contribution of natural and anthropogenic sources of total suspended particulate (TSP) causing permanent damage (black crusts) to the stone monuments of Catania (Sicily), one of the most popular ‘‘cities of art’’ of southern Italy. Atmospheric pollution of Catania, a typical Mediterranean coastal town, is mainly contributed by vehicle exhaust emissions rather than industrial ones. Episodically, the city also suffers gaseous and ash emissions (plumes) from the nearby Mount Etna volcano. Thus, to discriminate between natural and anthropogenic contributions to stone decay on Catania monuments, black crusts and TSP were sampled within the urban area and subjected to specific analytical procedures (optical microscopy, X-ray powder diffraction, Fourier transformed infrared spectroscopy, scanning electron microscopy equipped with energy dispersive spectrometry, ionic chromatography and dual inlet mass spectrometry). Mineralogical, chemical and isotopic characterization of black crusts and TSP provided new insights concerning the partition of sulfate sources in this particular urban context. The influence of Mount Etna emissions on both TSP and black crusts compositions was shown. Nevertheless, the key role of anthropogenic sources in the total sulfate budget was confirmed, while sea spray and volcanic emissions were found to make subordinate contributions. Quantitative data useful for the identification of the threshold pollution levels for preventive conservation of Catania monuments were obtained
On the bend number of circular-arc graphs as edge intersection graphs of paths on a grid
Golumbic, Lipshteyn and Stern \cite{Golumbic-epg} proved that every graph can
be represented as the edge intersection graph of paths on a grid (EPG graph),
i.e., one can associate with each vertex of the graph a nontrivial path on a
rectangular grid such that two vertices are adjacent if and only if the
corresponding paths share at least one edge of the grid. For a nonnegative
integer , -EPG graphs are defined as EPG graphs admitting a model in
which each path has at most bends. Circular-arc graphs are intersection
graphs of open arcs of a circle. It is easy to see that every circular-arc
graph is a -EPG graph, by embedding the circle into a rectangle of the
grid. In this paper, we prove that every circular-arc graph is -EPG, and
that there exist circular-arc graphs which are not -EPG. If we restrict
ourselves to rectangular representations (i.e., the union of the paths used in
the model is contained in a rectangle of the grid), we obtain EPR (edge
intersection of path in a rectangle) representations. We may define -EPR
graphs, , the same way as -EPG graphs. Circular-arc graphs are
clearly -EPR graphs and we will show that there exist circular-arc graphs
that are not -EPR graphs. We also show that normal circular-arc graphs are
-EPR graphs and that there exist normal circular-arc graphs that are not
-EPR graphs. Finally, we characterize -EPR graphs by a family of
minimal forbidden induced subgraphs, and show that they form a subclass of
normal Helly circular-arc graphs
Visualization and quantification of weathering effects and water uptake processes in natural building stones by using neutron imaging
Calcarenites are the most widely used natural building stones in Sicily. They are frequently subjected to very intense degradation due to salt growth [1, 2]. This process is often responsible for strong modifications of their pore network [3] and has a great influence in the mechanical properties and the durability of materials [4]. In addition, as water transport has a key role in the degradation processes, the quantification and visualization of fluidflow into the pore network of degraded stones represent useful tools in understanding the weathering process.
Classical approaches are usually performed by applying laboratory test routines for the determination of water absorption parameters. However, they cannot provide a description of the local distribution of water inside the stone. In this framework, neutron imaging has been demonstrated as a powerful technique for the visualization and quantification of the water distribution in partially saturated porous media [5]. Moreover, the possibility to perform dynamic measurements allowed monitoring the water uptake as function of time and to explore the complex processes involved in fluid transport [6-8].
In this study neutron radiography has been used with the aim of: a) monitoring and visualizing the fluidflow patterns inside porous structure of a local calcarenite widely used as building and replace stone in several Cultural Heritages, namely Sabucina Stone; b) quantifying the water distribution as function of time, in order to understand the effects of weathering on the behavior of the stone against water. In detail, samples of un-weathered and artificially weathered[9] Sabucina Stone have been scanned with neutron imaging technique at the IMAGINE beam line located at the Laboratoire Léon Brillouin (CEA/CNRS) in Saclay (France). Capillary water uptake has been monitored over time in samples subjected to different salt crystallization cycles.
Beside the qualitative data acquired from the raw neutron images (Figure 1(a)), quantitative results have been obtained thanks to the image processing of the radiographs (Figure 1(b)) [10]. First of all, the evolution of the wetting front position over time has been observed and the penetration coefficient has been determined. The results demonstrated that changes in the hydric properties of the stone occurred with the intensification of the degradation process. Even if a good agreement with standard capillary absorption test has been obtained [11], the non-perfect linearity of capillary uptake process has been evaluated, due to the evidence of preferential flow paths. Therefore, neutron images have been processed in order to obtain quantitative water distributions as function of time. The contour plot of the water content value highlighted that degraded stones absorbed greater volumes of water than the un-weathered ones, due to the strong modification of their pore structure. Moreover, in weathered samples the quicker and deeper vertical spreading of the water was associated with an intense horizontal migration through pores enlarged by the degradation mechanisms. Finally, side effects, probably due to the more intense action of the degradation process close to the sample surface, were evidenced, determining different capillarity absorption properties for the inner and surface regions. In conclusion, neutron radiography has allowed a better understanding of the deterioration mechanisms affecting physical properties of building stones, supplying relevant data for planning powerfully actions to improve their durability. References:
[1] M. Steiger, S. Asmussen. Geochimica et Cosmochimica Acta2008; 72: 4291.
[2] G.W. Scherer. Cement and Concrete Research1999; 29:1347.
[3]S. Raneri, V. Cnudde, T. De Kock, H. Derluyn, G. Barone, P. Mazzoleni. Europen Journal of Mineralogy2015; 27: 279
[4] S. Yu, C.T. Oguchi. Engineering Geology2010; 115: 226.
[5] E. Perfect, C.L.Cheng, M. Kanga, M.Z. Bilheux, J.M. Lamanna, M.J. Gragg, D.M. Wright. Earth-Science Reviews2014; 129:120.
[6] G. Barone G, V. Crupi, F. Longo, D. Majolino, P. Mazzoleni, S. Raneri, J. Teixeira, V. Venuti. Journal Instrumentation2014; 9: C05024.
[7] V. Cnudde, M. Dierick, J. Vlassenbroeck, B. Masschaele, E. Lehmann, P. Jacob, L. Van Hoorebeke. Nucl.Instrum. Methods Phys. Res. B 2008; 266:155.
[8] M. Dierick, J. Vlassenbroeck, B. Masschaele, V. Cnudde, L. van Hoorebeke, A. Hillenbach. Nucl.Instrum.Methods Phys. Res. A2005; 542:296.
[9] UNI EN 12370, Natural stones test methods: Determination of resistance to salt crystallisation, UNI ed., Milano, 2001.
[10] F.H. Kim, D. Penumadu, D.S. Hussey. J. Geotech. Geoenviron. Eng.2012; 138:147.G.
[11] G. Barone, P. Mazzoleni, G. Pappalardo, S. Raneri. Construction and Building Materials2015; 95:355
Correlazioni tra le velocit\ue0 ultrasoniche e le caratteristiche petrografiche in ceramiche archeologiche: un primo approccio metodologico
L\u2019analisi delle velocit\ue0 degli ultrasuoni permette di investigare i caratteri tessiturali e strutturali e di individuare la presenza di eventuali difetti localizzati all\u2019interno del campione. La loro diffusione negli studi archeometrici \ue8 legata alla non distruttivit\ue0 e alla possibilit\ue0 di fornire risultati accurati in tempo reale. In questo lavoro sono state effettuate numerose analisi petrografiche in sezione sottile e misure di velocit\ue0 di propagazione degli ultrasuoni su reperti ceramici di interesse archeologico. In particolare sono stati selezionati ed analizzati ceramiche preistoriche ed anfore da trasporto del V-IV sec. a.C., caratterizzati da differente granulometria, composizione e struttura.
Da questo primo approccio \ue8 stato possibile evidenziare che il parametro petrografico che influenza maggiormente la velocit\ue0 degli ultrasuoni \ue8 la forma e la disposizione spaziale dei pori, e la dimensione media degli inclusi, mentre correlazioni poco significative si ottengono prendendo in considerazione la percentuale e il tipo di inerte presente nell\u2019impasto ceramico
Measurement of Free Tropospheric Aerosols in the North Atlantic at the Pico Mountain Observatory.
AAAR 31st Annual Conference. Minneapolis, Minnesota, October 8-12, 2012.The Pico Mountain Observatory is located at 2225 m amsl on an inactive volcano at Pico Island in the Azores archipelago in the North Atlantic ~3900 km east and downwind of North America (38º28'15''N; 28º24’'14''W). The unique location of the Observatory enables sampling of free tropospheric air transported over long, intercontinental distances and is rarely affected by local emissions. The Observatory is affected mainly by North American outflow after its trans-Atlantic transport. Therefore, its location is ideal for observations of long-range transported pollutants emitted from anthropogenic and biogenic continental sources. The composition of continental pollution outflow is altered during transport by mixing, chemical reactions, phase changes, and removal processes. Thus, the properties of aerosol and trace gases in downwind regions are impacted by the outflow of pollutants, their chemical transformation, and sinks. In previous work, the sampled air-mass measurements (including CO, O3, NOx, NOy, NMHC, black carbon and aerosol optical size) and the simulations of their dispersion indicated outflow of North American tropospheric ozone and its precursors. Although the measurements have been crucial in explaining the evolution of North American gaseous pollution, little is known regarding the nature of the aged aerosol. New work is currently underway at the Observatory to provide chemical characterization of the intercepted free tropospheric aerosols. Here, we show the preliminary results of the free tropospheric aerosol composition and its physical properties. Samples were collected using high-volume filter samplers with quartz filters and analyzed for organic and elemental carbon (OC and EC, respectively). We compare the observed OC and EC values to the collocated measurements of gas- and particle-phase species, meteorological parameters and to the values found in current literature. We highlight the future work in which we will select filter samples based on the arrival of highly polluted air masses from anthropological or biomass burning emissions for further detailed analysis
3D Graphic for promoting Cultural Heritages: the example of Petraro archaeological site in Villasmundo (Melilli-Siracusa, Sicily)
This work is part of a wider project aimed to studying and promoting the archeological area of “Petraro” in Villasmundo (Melilli – SR), in collaboration with LegambienteMelilli – Sezione TimpaDdieri. Explored for the first time in 1967 by the archeologist Giuseppe Voza[1], the site exhibits the remains of an interesting prehistoric fortified village dated at XVI – XV sec. B. C.; this structure has been evaluated as an unicum in Sicily for its architectonical characteristics and archeological records[2].Unfortunately, for many years, the area has been abandoned and made inaccessible to visitors, causing an important degrade of the site.
In the last decade, the use of virtual reconstruction of Cultural Heritage has become a recurring custom for visualization of several features of an archaeological site[3, 4]. In particular, 3D computer graphics have been interpreted as a useful tool for the understanding of prehistoric remains[5], often characterized by bad preservation and absence of documentary sources.
For aforementioned, the aim of this paper is to present the results of a virtual model of the prehistoric village of Petraro and the archeological records recovered in the site.
In this context, 3D modeling could clarify some features of the area and offer a new tool for promoting this archeological site
- …