Effects of biofuels properties on aircraft engine performance

Purpose-The purpose of this paper is to examine the effects of heat capacity and density of biofuels on aircraft engine performance indicated by thrust and fuel consumption. Design/methodology/approach-The influence of heat capacity and density was examined by simulating biofuels in a two-spool high-bypass turbofan engine running at cruise condition using a Cranfield in-house engine performance computer tool (PYTHIA). The effect of heat capacity and density on engine performance was evaluated through a comparison between kerosene and biofuels. Two types of biofuels were considered: Jatropha Bio-synthetic Paraffinic Kerosene (JSPK) and Camelina Bio-synthetic Paraffinic Kerosene (CSPK). Findings-Results show an increase in engine thrust and a reduction in fuel consumption as the percentage of biofuel in the kerosene/biofuel mixture increases. Besides a low heating value, an effect of heat capacity on increasing engine thrust and an effect of density on reducing engine fuel consumption are observed. Practical implications-The utilisation of biofuel in aircraft engines may result in reducing over-dependency on crude oil. Originality/value-This paper observes secondary factors (heat capacity and density) that may influence aircraft engine performance which should be taken into consideration when selecting new fuel for new engine designs

Cost effectiveness analysis of using different monitoring modalities in treating severe traumatic brain injury (CESTBI) in neuro-ICU, HUSM, Kelantan

Introduction: There are two schools of thought in practicing neurotrauma monitoring for patients with severe traumatic brain injury (TBI); the application of the baseline neuro-monitoring (BNM) and the use of multiple modalities neurotrauma monitoring (M3) which is very expensive. The answer of which of the two monitoring systems is more eflicient and worth doing should be sought. Objective: To determine the cost effectiveness analysis between BNM and M3 monitoring modalities in the management of severe TBI. Methodology: Sixty-two patients with severe TBI admitted to Neuro-ICU, USM who fulfilled the predetermined criteria were selected using systematic random sampling. The macro and micro costing were performed on each of patient. Barthel Index was used to measure physical performance as an outcome six months after discharge. The analyses used were the Independent t- test, ANCOVA, and Repeated Measure ANOVA. Results: The mean total equipment cost of M3 was significantly higher at p = 0.049 (mean difference of RM23.74) after controlling other variables. The mean difference in Barthel Index after six months was significance between the two groups (p = 0.031), patients that were treated with M3 had higher score 163.7 (SD 30.03)J compared to those who were treated with BNM 146.83 (SD 30.36)]. However, the cost-effectiveness ratio of using M3 was significantly lowered (p=O.031) with a mean of RM476.29 was needed to increase a unit improvement in mean Barthel Index compared to RM629.12 if we used BNM. Conclusion: Although M3 is more costly, the outcome of patients treated with M3 was better than that of BNM. Therefore we can conclude that the used of multiple neuro-monitoring was more cost effective than the use of only baseline neuro-monitoring in treating severe traumatic brain injury

Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode

Abstract: This paper presents an experimental investigation of two different magnetorheological ( MR) fluids, namely, water-based and hydrocarbon-based MR fluids in compression mode under various applied currents. Finite element method magnetics was used to predict the magnetic field distribution inside the MR fluids generated by a coil. A test rig was constructed where the MR fluid was sandwiched between two flat surfaces. During the compression, the upper surface was moved towards the lower surface in a vertical direction. Stress-strain relationships were obtained for arrangements of equipment where each type of fluid was involved, using compression test equipment. The apparent compressive stress was found to be increased with the increase in magnetic field strength. In addition, the apparent compressive stress of the water-based MR fluid showed a response to the compressive strain of greater magnitude. However, during the compression process, the hydrocarbon-based MR fluid appeared to show a unique behaviour where an abrupt pressure drop was discovered in a region where the apparent compressive stress would be expected to increase steadily. The conclusion is drawn that the apparent compressive stress of MR fluids is influenced strongly by the nature of the carrier fluid and by the magnitude of the applied current

Program Perantis Sedia Ada Bagi Meningkatkan Kebolehpasaran Pelajar Ijazah Sarjana Muda Universiti Malaysia Pahang

Mengikut unjuran Kementerian Pengajian Tinggi (KPT), terdapat pertambahan graduan sebanyak 4.74% setahun. Seiring dengan perancangan peningkatan kadar pelajar di IPT, adalah dijangkakan bilangan pengangguran di kalangan graduan juga akan meningkat sekiranya tindakan sokongan tidak dilaksanakan. Oleh yang demikian,KPT telah melancarkan pelbagai Program Kebolekhpsasaran Graduan IPT. Kajian ini bertujuan untuk mengkaji perlaksanaan dan keberkesanan program perintis atau perantis yang telah dijalankan Universiti Malaysia Pahang (UMP), namun laporan keberkesanan dan kelestarian programprogram sukar didapati untuk dijadikan panduan dalam merangka dan melaksanakan program-program perantis baharu di UMP. Oleh yang demikian, kajian ini dijalankan bagi mengumpul semula maklumat berkaitan sebagai rujukan bagi penambahbaikan dan rujukan program perantis yang akan dilaksanakan kelak

Advanced of Mathematics-Statistics Methods to Radar Calibration for Rainfall Estimation; A Review

Ground-based radar is known as one of the most important systems for precipitation measurement at high spatial and temporal resolutions. Radar data are recorded in digital manner and readily ingested to any statistical analyses. These measurements are subjected to specific calibration to eliminate systematic errors as well as minimizing the random errors, respectively. Since statistical methods are based on mathematics, they offer more precise results and easy interpretation with lower data detail. Although they have challenge to interpret due to their mathematical structure, but the accuracy of the conclusions and the interpretation of the output are appropriate. This article reviews the advanced methods in using the calibration of ground-based radar for forecasting meteorological events include two aspects: statistical techniques and data mining. Statistical techniques refer to empirical analyses such as regression, while data mining includes the Artificial Neural Network (ANN), data Kriging, Nearest Neighbour (NN), Decision Tree (DT) and fuzzy logic. The results show that Kriging is more applicable for interpolation. Regression methods are simple to use and data mining based on Artificial Intelligence is very precise. Thus, this review explores the characteristics of the statistical parameters in the field of radar applications and shows which parameters give the best results for undefined cases. DOI: 10.17762/ijritcc2321-8169.15012

Size growth and age of two congeneric archer fishes (Toxotes jaculatrix pallas, 1767 and Toxotes chatareus Hamilton, 1822) inhabiting Malaysian coastal waters

The size, growth and age of two congeneric archer fishes Toxotes jaculatrix and Toxotes chatareus collected from Johor coastal waters, Malaysia was studied. The standard length (SL) and body weight (BW) ranges of the two species caught in the study area were 7-12.2 cm SL (9.35±0.19 cm), 11-55 g BW (27.04±1.62 g) and 8-12.2 cm SL (9.88±0.17cm), 15.12-54g BW (30.52±1.72 g), respectively. The ratio of male and female specimens of T. jaculatrix and T. chatareus were 70%, 30% and 68.6%, 31.4%, respectively. The estimated von Bertalanffy growth parameters were L∞ = 12.78 cm, 13.59 cm and K = 1.46 year-1, 1.53 year-1 with a growth performance index of Ø’ = 5.48 and 5.64 in both species, respectively. In order to determine the age, the technique of reading and interpretation of the daily growth increments/rings in the sagittae otoliths and scales were applied. Daily growth increments and annulus of scales counts confirmed that the ages of the samples for both species were typically less than one year (<1) and the remnant samples were between one and two years. The similarity between scale and otolith age determination was identical and dissimilarity was observed only in few samples of both species

Radio Frequency Identification (RFID) based car parking system

Radio Frequency Identification (RFID) technology is widely used in various applications such as attendance system, tracking system, monitoring system or parking system. Currently, the existing parking system used manual entrance through security guard to access the premise. Therefore, the company need to hire security guard to monitor the premise. In addition, the security guards need to monitor all movement of vehicle or person that enter or leave the premise. As a result, unauthorized vehicle or person can easily access the building. To address this problem, we proposed a parking system using RFID technology that can monitor vehicle’s movement that enter or leave the specific area or place by scanning the RFID tag. The potential benefit is it can improve security for both security guards and users. Besides that, this parking system can facilitate access control for users and improve traffic flow during peaks period. There are five modules in the proposed parking systems which are user registration, vehicle registration, RFID tag, staff and report generation

Growth of tiger grouper (Epinephelus fuscoguttatus) juvenile from wild and hatchery at different type of feeds

This study aimed to observe the influence of two sources of juvenile tiger grouper Epinephelus fuscoguttatus (Forsskål, 1775) from the sea and the hatchery by several types of food (pellets, tilapia anchovies). Growing Studies were carried out above 9600 juvenile tiger grouper from two sources namely differing from the sea of 4800 juvenile and 4800 juvenile hatchery from hatching. The design of treament were done by 2x3  with four replications. During the 30 day rearing period, each 5 days is taken  sampling total body length (cm) juvenile tiger grouper. The results showed that during the rearing period the value of marine juvenile grouper only high growth in juvenile ate anchovies and tilapia except on day 5 and 30, and could not adapt to the food from the pellet. While in hatchery juvenile tiger grouper had high growth to consume pellets only and could not adapt well to the food of tilapia and except anchovies on day 15th

Evaluation of Trace Metal Levels in Tissues of Two Commercial Fish Species in Kapar and Mersing Coastal Waters, Peninsular Malaysia

This study is focused on evaluating the trace metal levels in water and tissues of two commercial fish species Arius thalassinus and Pennahia anea that were collected from Kapar and Mersing coastal waters. The concentrations of Fe, Zn, Al, As, Cd and Pb in these coastal waters and muscle, liver and gills tissues of the fishes were quantified. The relationship among the metal concentrations and the height and weight of the two species were also examined. Generally, the iron has the highest concentrations in both water and the fish species. However, Cd in both coastal waters showed high levels exceeding the international standards. The metal level concentration in the sample fishes are in the descending order livers > gills > muscles. A positive association between the trace metal concentrations and weight and length of the sample fishes was investigated. Fortunately the level of these metal concentrations in fish has not exceeded the permitted level of Malaysian and international standards

The Concept of Single Use Piston Break Safety Syringe

syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. Syringes are often used to administer injections, apply compounds such as glue or lubricant, and measure liquids. The reuse and abuse of syringe has led to cross-infection of diseases; thus, the need of single use safety syringe arises. Single use safety syringe is able to prevent the abuse of syringe. Many inventions have been produced; the most common are through-push retract breakable safety syringe, rotary plunger retractable safety syringe and release-ring breakable safety syringe. A new type of single use safety syringe Piston Break Safety Syringe is discussed in this paper. Common safety syringes available in market consist of three major components as described earlier. Beside its simplicity, the low cost to produce also the main factor why this type is very popular. The new Piston Break Safety Syringe has similar design with this widely used safety syringe; hence, it makes it easier to be adapted by the users due to its similarity, since no extra training to use it is required. The cost should be equivalently low due to the similarity in size, design and number of components