2,406 research outputs found
Estimation of Equivalent Axleloads
The primary objective of this research study was to develop a procedure for estimating equivalent axle loads for purposes of flexible-pavement design. Maximum use was made of historical data and well-accepted procedures were used in developing the prediction model. A series of computer programs was developed to summarize truck-weight and classification data such that traffic characteristics could be estimated from a matrix of data classified by geographic area, Federal highway system, volume, and extent of coal haulage. An equation was developed with the following seven parameters as independent variables; 1) annual average daily traffic volume, 2) average fraction of trucks in the traffic stream, 3) average fraction of coal trucks in the total truck population, 4) average number of axles per coal truck, 5 ) average number of axles per non-coal truck, 6 ) average number of equivalent axleloads per coal-truck axle, and 7) average number of equivalent axleloads per non-coal-truck axle. The equivalent axleload estimate was calculated from estimates of the seven traffic parameters.
The procedure for estimating equivalent axleloads was found to be a simple one that yields reproducible results while allowing great flexibility in merging site-specific data with statewide averages for roads of similar type. Location-to-location variability was recognized and a recommendation was made to incorporate site-specific data into the design estimate whenever possible
The application of passive sampler (DGT) technology for improved understanding of metal behaviour at a marine disposal site
Metal behaviour and availability at a contaminated dredge material disposal site within UK waters has been investigated using Diffusive Gradient in Thin films (DGT) passive sampling technology. Three stations representing contrasting history and presence of maintenance dredge disposal, including a control station outside the disposal site, have been studied and depth profiles of fluxes of different metals (Fe, Mn, Pb, Cu, Cd, Cr, Ni, Zn) to the binding gel (Chelex 100) have been derived. Higher flux rates and shallower mobilisation of metals (Mn and Fe) to the binding gel were observed at the disposal stations compared to the control station. Here we describe metal mobilization at different depths, linking the remobilization of Fe2+ and Mn2+ to the sediment (re)supply of other heavy metals of interest with a focus on Cd, Ni and Pb and as they are on the Water Framework Directive (WFD) list of priority substances and OSPAR list of priority pollutants. Results showed that Cd, Pb and Ni exhibited signs of resupply at the sediment-water interface (SWI). There was a potential increased mobilisation and source to the water column of Pb and Ni at the disposal site stations, but there was no Cd source, despite higher total loadings. This information has the potential to improve our current understanding of metal cycles at disposal sites. This work can be used as an indication of likely metal bioavailability and also assist in determining whether the sites act as sources or sinks of heavy metals. This information could assist disposal site monitoring and dredge material licensing
Using assignment data to analyse a blended information literacy intervention: a quantitative approach
This research sought to determine whether a blended information literacy learning and teaching intervention could statistically significantly enhance undergraduatesâ information discernment compared to standard face-to-face delivery. A mixture of face-to-face and online activities, including online social media learning, was used. Three interventions were designed to develop the information literacies of first-year undergraduates studying Sport and Exercise at Staffordshire University and focused on one aspect of information literacy: the ability to evaluate source material effectively. An analysis was devised where written evaluations of found information for an assessment were converted into numerical scores and then measured statistically. This helped to evaluate the efficacy of the interventions and provided data for further analysis. An insight into how the information literacy pedagogical intervention and the cognitive processes involved in enabling participants to interact critically with information is provided. The intervention which incorporated social media learning proved to be the most successful learning and teaching approach. The data indicated that undergraduate studentsâ information literacy can be developed. However, additional long-term data is required to establish whether this intervention would have a lasting impact
The structure of gravel-bed flow with intermediate submergence: a laboratory study
The paper reports an experimental study of the flow structure over an immobile gravel bed in open channel at intermediate submergence, with particular focus on the near-bed region. The experiments consisted of velocity measurements using three-component (stereoscopic) Particle Image Velocimetry (PIV) in near-bed horizontal plane and two-component PIV in three vertical planes that covered three distinctly different hydraulic scenarios where the ratio of flow depth to roughness height (i.e., relative submergence) changes from 7.5 to 10.8. Detailed velocity measurements were supplemented with fine-scale bed elevation data obtained with a laser scanner. The data revealed longitudinal low-momentum and high-momentum "strips'' in the time-averaged velocity field, likely induced by secondary currents. This depth-scale pattern was superimposed with particle-scale patches of flow heterogeneity induced by gravel particle protrusions. A similar picture emerged when considering second-order velocity moments. The interaction between the flow field and gravel-bed protrusions is assessed using cross correlations of velocity components and bed elevations in a horizontal plane just above gravel particle crests. The cross correlations suggest that upward and downward fluid motions are mainly associated with upstream-facing and lee sides of particles, respectively. Results also show that the relative submergence affects the turbulence intensity profiles for vertical velocity over the whole flow depth, while only a weak effect, limited to the near-bed region, is noticed for streamwise velocity component. The approximation of mean velocity profiles with a logarithmic formula reveals that log-profile parameters depend on relative submergence, highlighting inapplicability of a conventional "universal'' logarithmic law for gravel-bed flows with intermediate submergence
The in situ synthesis of PbS nanocrystals from lead(II) n -octylxanthate within a 1,3-diisopropenylbenzeneâbisphenol A dimethacrylate sulfur copolymer
The synthesis of lead sulfide nanocrystals within a solution processable sulfur âinverse vulcanizationâ polymer thin film matrix was achieved from the in situ thermal decomposition of lead(II) n-octylxanthate, [Pb(S2COOct)2]. The growth of nanocrystals within polymer thin films from single-source precursors offers a faster route to networks of nanocrystals within polymers when compared with ex situ routes. The âinverse vulcanizationâ sulfur polymer described herein contains a hybrid linker system which demonstrates high solubility in organic solvents, allowing solution processing of the sulfur-based polymer, ideal for the formation of thin films. The process of nanocrystal synthesis within sulfur films was optimized by observing nanocrystal formation by X-ray photoelectron spectroscopy and X-ray diffraction. Examination of the film morphology by scanning electron microscopy showed that beyond a certain precursor concentration the nanocrystals formed were not only within the film but also on the surface suggesting a loading limit within the polymer. We envisage this material could be used as the basis of a new generation of materials where solution processed sulfur polymers act as an alternative to traditional polymers
The impact of pumped water from a de-watered Magnesian limestone quarry on an adjacent wetland: Thrislington, County Durham, UK
Although quarrying is often cited as a potential threat to wetland systems, there is a lack of relevant, quantitative case studies in the literature. The impact of pumped groundwater discharged from a quarry into a wetland area was assessed relative to reference conditions in an adjacent fen wetland that receives only natural runoff. Analysis of vegetation patterns at the quarry wetland site, using Detrended Correspondence Analysis and the species indicator values of Ellenberg, revealed a clear disparity between community transitions in the quarry wetland and the reference site. Limited establishment of moisture-sensitive taxa, the preferential proliferation of robust wetland species and an overall shift towards lower species diversity in the quarry wetland were explicable primarily by the physico-chemical environment created by quarry dewatering. This encompassed high pH (up to 12.8), sediment-rich effluent creating a nutrient-poor substrate with poor moisture retention in the quarry wetland, and large fluctuations in water levels. © 2005 Elsevier Ltd. All rights reserved
UHECR Particle Spectra from Crypton Decays
We calculate the spectra of ultra-high-energy cosmic rays (UHECRs) in an
explicit top-down model based on the decays of metastable neutral `crypton'
states in a flipped SU(5) string model. For each of the eight specific
10th-order superpotential operators that might dominate crypton decays, we
calculate the spectra of both protons and photons, using a code incorporating
supersymmetric evolution of the injected spectra. For all the decay operators,
the total UHECR spectra are compatible with the available data. Also, the
fractions of photons are compatible with all the published upper limits, but
may be detectable in future experiments.Comment: 9 pages latex, 10 eps figure
Funding issues in a major strategic project: A case of investment appraisal
This paper describes and allows interaction with the issues involved in a major investment decision. In the summer of 1997, UKH faced major decisions concerning the purchase and funding of new plant and equipment. The authors were given excellent access to the company and were able to document key steps in the decision process.
The issues are set out in a case study format that allows the reader to retrace the analyses carried out within UKH. A number of tasks are suggested that should test, develop and enhance a range of analytical, social and negotiation skills.
The case can be handled in a variety of ways and most of the suggested tasks can be undertaken or omitted depending on the pedagogical objectives of the course/ instructor
- âŠ