Use of LANDSAT-1 data for the detection and mapping of saline seeps in Montana

The author has identified the following significant results. April, May, and August are the best times to detect saline seeps. Specific times within these months would be dependent upon weather, phenology, and growth conditions. Saline seeps can be efficiently and accurately mapped, within resolution capabilities, from merged May and August LANDSAT 1 data. Seeps were mapped by detecting salt crusts in the spring and indicator plants in the fall. These indicator plants were kochia, inkweed, and foxtail barley. The total hectares of the mapped saline seeps were calculated and tabulated. Saline seeps less than two hectares in size or that have linear configurations less than 200 meters in width were not mapped using the LANDSAT 1 data. Saline seep signatures developed in the Coffee Creek test site were extended to map saline seeps located outside this area

Reflection beam isolator for submillimeter wavelengths

Magnetoplasma reflection beam isolators for submillimeter wave use are discussed. The basic configuration used is that of the Kerr transverse magneto-optical effect. Theoretical and experimental data at 337 microns using InSb as a plasma are given

Hollow-cylinder waveguide isolators for use at millimeter wavelengths

A semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially is considered in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode matching analysis are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94GHz and 75 K

Land use mapping in Erie County, Pennsylvania: A pilot study

The author has identified the following significant results. A pilot study was conducted to determine the feasibility of mapping land use in the Great Lakes Basin area utilizing ERTS-1 data. Small streams were clearly defined by the presence of trees along their length in predominantly agricultural country. Field patterns were easily differentiated from forested areas; dairy and beef farms were differentiated from other farmlands, but no attempt was made to identify crops. Large railroad lines and major highway systems were identified. The city of Erie and several smaller towns were identified, as well as residential areas between these towns, and docks along the shoreline in Erie. Marshes, forests, and beaches within Presque Isle State Park were correctly identified, using the DCLUS program. Bay water was differentiated from lake water, with a small amount of misclassification

The application of semiconductors to quasi- optical isolators for use at submillimeter wavelengths

Semiconductor application to quasi-optical isolators - nonreciprocal reflection beam isolator and far infrared isolators using Faraday rotatio

The effect of relative plasma plume delay on the properties of complex oxide films grown by multi-laser multi-target combinatorial pulsed laser deposition

We report the effects of relative time delay of plasma plumes on thin garnet crystal films fabricated by dual-beam, combinatorial pulsed laser deposition. Relative plume delay was found to affect both the lattice constant and elemental composition of mixed Gd3Ga5O12 (GGG) and Gd3Sc2Ga5O12 (GSGG) films. Further analysis of the plasmas was undertaken using a Langmuir probe, which revealed that for relative plume delays shorter than ~200 µs, the second plume travels through a partial vacuum created by the first plume, leading to higher energy ion bombardment of the growing film. The resulting in-plane stresses are consistent with the transition to a higher value of lattice constant normal to the film plane that was observed around this delay value. At delays shorter than ~10 µs, plume propagation was found to overlap, leading to scattering of lighter ions from the plume and a change in stoichiometry of the resultant films

Collection efficiency and design of microbial air samplers

The variables affecting the physical collection efficiency of air samplers of the type that impact microbe-carrying particles onto agar were investigated using a simplified analytical method and computational fluid dynamics. The results from these two techniques were compared, as were the effect of jet velocity, nozzle size, and nozzle distance from the agar surface; also considered was the optimisation of these variables to obtain an efficient design of sampler. A technique is described that calculates the proportion of microbe-carrying particles that a sampler will collect from a typical size distribution of microbe-carrying particles found in an occupied room; the three air samplers studied were found to collect from about 22% to over 99% of the micro-organisms in the room air

The Adelaide VHF radar: Capabilities and future plans

The VHF radar at Buckland Park, South Australia commenced operation in January, 1984. The radar is located adjacent to the 2-MHz ionospheric radar. The routine method for measuring horizontal wind velocity is the space antenna technique (SA) while the Doppler technique is used to measure vertical velocities. It is possible to swing the transmitting beam in the east-west plane, allowing Doppler measurements of the EW wind component

IR optical fiber-based noncontact pyrometer for drop tube instrumentation

The design of a two color pyrometer with infrared optical fiber bundles for collection of the infrared radiation is described. The pyrometer design is engineered to facilitate its use for measurement of the temperature of small, falling samples in a microgravity materials processing experiment using a 100 meter long drop tube. Because the samples are small and move rapidly through the field of view of the pyrometer, the optical power budget of the detection system is severly limited. Strategies for overcoming this limitation are discussed

Radiation exposure awareness from patients undergoing nuclear medicine diagnostic 99mTc-MDP bone scans and 2-deoxy-2-(18F) fluoro-D-glucose PET/computed tomography scans

INTRODUCTION: Medical imaging is on average the largest source of artificial radiation exposure worldwide. This study seeks to understand patient's awareness of radiation exposure derived from nuclear medicine diagnostic scans and assess if current information provided by leaflets is adequate. METHODS: Single-centre cross-sectional questionnaire study applied to bone scan and FDG PET/computed tomography patients, at a nuclear medicine and PET/computed tomography department over a 15-week period in 2018. Questionnaires on dose comparators were designed in collaboration with patients, public, and experts in radiation exposure. Qualitative data were analysed using thematic analysis and quantitative data using SPSS (V. 24). RESULTS: A total of 102 questionnaires were completed (bone scan = 50; FDG PET/computed tomography = 52). Across both groups, 33/102 (32.4%) patients reported having a reasonable understanding of nuclear medicine and 21/102 (20.6%) reported a reasonable knowledge of ionising radiations. When asked to compare the exposure dose of respective scans with common comparators 8/50 (16%) of bone scan patients and 11/52 (21.2%) FDG PET/computed tomography answered correctly. On leaflet information, 15/85 (17.6%) patients reported the leaflets do not provide enough information on radiation exposure and of these 10/15 (66.7%) commented the leaflets should incorporate more information on radiation exposure dose. CONCLUSION: More observational and qualitative studies in collaboration with patients are warranted to evaluate patients' understanding and preferences in communication of radiation exposure from nuclear medicine imaging. This will ensure communication tools and guidelines developed to comply with ionising radiation (medical exposure) regulation 2017 are according to patients needs and preferences