31 research outputs found
Theoretical analysis of a novel integrated energy system formed by a microturbine and a exhaust fired single-double effect absorption chiller
Integrated Energy Systems (IES) combine a distributed power generation system (DG) such as a microturbine generator (MTG) or a fuel cell with thermally activated technologies (TAT) such as absorption cooling. This integration maximizes the efficiency of energy use by utilizing on-site most of the waste heat generated by DG, and reduces
harmful emissions to the environment. This study investigates the energy and exergy performance of an IES. This system is comprised of an MTG with internal recuperator and a novel absorption cooling cycle. The absorption cycle is a single-double effect exhaust fired cycle, which recuperates the heat exchanged from the MTG exhaust gases using two generators at two different levels of temperature. The selection of the DG element, the TAT element and their internal configurations is based upon a real IES commercial unit that has
been tested in the APEP-UCI DG testing facilities in Irvine, California. This unit has an electrical power capacity of 28 kW and a cooling capacity of 14 refrigeration tons (49.2 kW). Inputs for the thermodynamic models developed for the MTG and for the absorption
cycle are derived from experimental variables that will be controlled in the testing phase. The MTG model is using empirical correlations for key model parameters (pressure ratio, turbine inlet temperature, etc.) from previous studies in order to predict the observed
change in performance with part load operation. The calculated mass flow rate and temperature of the exhaust gases are inputs for the absorption cycle model, together with cooling and chilled water inlet temperatures and flow rates. Heat and mass transferefficiencies along with heat transfer coefficients for the suite of heat exchangers
comprising the single-double effect absorption cycle are determined from proprietary testing data provided by the manufacturers
In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection
Experiments have been conducted in the DIII-D tokamak to explore the in-situ
growth of silicon-rich layers as a potential technique for real-time
replenishment of surface coatings on plasma-facing components (PFCs) during
steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm
diameter were injected into low- and high-confinement (L-mode and H-mode)
plasma discharges with densities ranging from m
and input powers ranging from 5.5-9 MW. The small Si pellets were delivered
with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz
corresponding to mass flow rates of 5-19 mg/s ( Si/s) at
cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite
samples were exposed to the scrape-off layer and private flux region plasmas
through the divertor material evaluation system (DiMES) to evaluate the Si
deposition on the divertor targets. The Si II emission at the sample correlates
with silicon injection and suggests net surface Si-deposition in measurable
amounts. Post-mortem analysis showed Si-rich coatings of varying morphology
mainly containing silicon oxides, with SiO being the dominant component. No
evidence of SiC was found, which is attributed to low divertor surface
temperatures. The Si-rich coating growth rates were found to be at least
nm/s, and the erosion rate was nm/s. The technique is
estimated to coat a surface area of at least 0.94 m on the outer divertor.
These results demonstrate the potential of using real-time material injection
to grow silicon-rich layers on divertor PFCs during reactor operation
Recommended from our members
Theoretical Analysis Of A Novel Integrated Energy System Formed By A Microturbine And A Exhaust Fired Single-Double Effect Absorption Chiller
Integrated Energy Systems (IES) combine a distributed power generation system (DG) such as a microturbine generator (MTG) or a fuel cell with thermally activated technologies (TAT) such as absorption cooling. This integration maximizes the efficiency of energy use by utilizing on-site most of the waste heat generated by DG, and reduces harmful emissions to the environment. This study investigates the energy and exergy performance of an IES. This system is comprised of an MTG with internal recuperator and a novel absorption cooling cycle. The absorption cycle is a single-double effect exhaust fired cycle, which recuperates the heat exchanged from the MTG exhaust gases using two generators at two different levels of temperature. The selection of the DG element, the TAT element and their internal configurations is based upon a real IES commercial unit that has been tested in the APEP-UCI DG testing facilities in Irvine, California. This unit has an electrical power capacity of 28 kW and a cooling capacity of 14 refrigeration tons (49.2 kW). Inputs for the thermodynamic models developed for the MTG and for the absorption cycle are derived from experimental variables that will be controlled in the testing phase. The MTG model is using empirical correlations for key model parameters (pressure ratio, turbine inlet temperature, etc.) from previous studies in order to predict the observed change in performance with part load operation. The calculated mass flow rate and temperature of the exhaust gases are inputs for the absorption cycle model, together with cooling and chilled water inlet temperatures and flow rates. Heat and mass transfer efficiencies along with heat transfer coefficients for the suite of heat exchangers comprising the single-double effect absorption cycle are determined from proprietary testing data provided by the manufacturers