169 research outputs found
A comparison of radome- and astrodome-enclosed large radio telescopes at millimeter wavelengths: The Large Millimeter Telescope
We present a systematic comparison of the main figures of merit for an open-air radio telescope and two different types of enclosed antennas: (1) an ordinary radome, with a metal space frame providing the required mechanical rigidity and a dielectric membrane, and (2) an “astrodome,” i.e., a corotating rigid dome with a large window covered by a tensile membrane structure. The analysis is limited to submillimeter and millimeter wavelengths and large (≳30 m) antenna/enclosure systems, where the window tensile structure is very unlikely to be removable and is supported by either a metal space frame or cable networks. As compared with previous studies of this type, here we concentrate on the specific effects that these large metallic support structures have on sensitive astronomical observations. In particular, we critically discuss how the wind-induced random motions of the metal space frame can limit the sensitivity of continuum observations, as a result of fluctuating shadowing and spillover effects combined with various beam-chopping techniques. Using the Large Millimeter Telescope as a benchmark, we provide baselines for future projects where a similar comparison is needed
Prototype design of a dielectrically embedded mesh lens
Here we present a prototype design for a
dielectrically embedded mesh lens consisting of stacked
layers of printed circuit board (PCB) material and
embedded copper elements. The dielectrically embedded
mesh lens consists of layers of dielectric which contain subwavelength-
dimension metal elements laid out in a grid
fashion, and is both flat and lightweight. It has been
demonstrated that the sizes of these metal elements can be
varied according to their position in the apparatus, using
models based on transmission line theory, to create a lens
which focuses a plane wave at millimeter wavelength to a
Gaussian beam with very low transmission loss, even
without the use of antireflective coating. We present the
phase design for our lens which was designed, using
transmission line theory and electromagnetic modelling
software, to operate at 20GHz. We further present an\ud
analysis of the transmission line components which will
make up the lens
BFORE: The B-mode Foreground Experiment
The B-mode Foreground Experiment (BFORE) is a proposed NASA balloon project
designed to make optimal use of the sub-orbital platform by concentrating on
three dust foreground bands (270, 350, and 600 GHz) that complement
ground-based cosmic microwave background (CMB) programs. BFORE will survey ~1/4
of the sky with 1.7 - 3.7 arcminute resolution, enabling precise
characterization of the Galactic dust that now limits constraints on inflation
from CMB B-mode polarization measurements. In addition, BFORE's combination of
frequency coverage, large survey area, and angular resolution enables science
far beyond the critical goal of measuring foregrounds. BFORE will constrain the
velocities of thousands of galaxy clusters, provide a new window on the cosmic
infrared background, and probe magnetic fields in the interstellar medium. We
review the BFORE science case, timeline, and instrument design, which is based
on a compact off-axis telescope coupled to >10,000 superconducting detectors.Comment: 7 pages, 4 figures, conference proceedings published in Journal of
Low Temperature Physic
A Fluctuation Analysis of the Bolocam 1.1mm Lockman Hole Survey
We perform a fluctuation analysis of the 1.1mm Bolocam Lockman Hole Survey,
which covers 324 square arcmin to a very uniform point source-filtered RMS
noise level of 1.4 mJy/beam. The fluctuation analysis has the significant
advantage of utilizing all of the available data. We constrain the number
counts in the 1-10 mJy range, and derive significantly tighter constraints than
in previous work: the power-law index is 2.7 (+0.18, -0.15), while the
amplitude is equal to 1595 (+85,-238) sources per mJy per square degree, or
N(>1 mJy) = 940 (+50,-140) sources/square degree (95% confidence). Our results
agree extremely well with those derived from the extracted source number counts
by Laurent et al (2005). Our derived normalization is about 2.5 times smaller
than determined by MAMBO at 1.2mm by Greve et al (2004). However, the
uncertainty in the normalization for both data sets is dominated by the
systematic (i.e., absolute flux calibration) rather than statistical errors;
within these uncertainties, our results are in agreement. We estimate that
about 7% of the 1.1mm background has been resolved at 1 mJy.Comment: To appear in the Astrophysical Journal; 22 pages, 9 figure
Current status of Bolocam: a large-format millimeter-wave bolometer camera
We describe the design and performance of Bolocam, a 144-element, bolometric, millimeter-wave camera. Bolocam is currently in its commissioning stage at the Caltech Submillimeter Observatory. We compare the instrument performance measured at the telescope with a detailed sensitivity model, discuss the factors limiting the current sensitivity, and describe our plans for future improvements intended to increase the mapping speed
A Bright Submillimeter Source in the Bullet Cluster (1E0657--56) Field Detected with BLAST
We present the 250, 350, and 500 micron detection of bright submillimeter
emission in the direction of the Bullet Cluster measured by the Balloon-borne
Large Aperture Submillimeter Telescope (BLAST). The 500 micron centroid is
coincident with an AzTEC 1.1 mm point-source detection at a position close to
the peak lensing magnification produced by the cluster. However, the 250 micron
and 350 micron centroids are elongated and shifted toward the south with a
differential shift between bands that cannot be explained by pointing
uncertainties. We therefore conclude that the BLAST detection is likely
contaminated by emission from foreground galaxies associated with the Bullet
Cluster. The submillimeter redshift estimate based on 250-1100 micron
photometry at the position of the AzTEC source is z_phot = 2.9 (+0.6 -0.3),
consistent with the infrared color redshift estimation of the most likely IRAC
counterpart. These flux densities indicate an apparent far-infrared luminosity
of L_FIR = 2E13 Lsun. When the amplification due to the gravitational lensing
of the cluster is removed, the intrinsic far-infrared luminosity of the source
is found to be L_FIR <= 10^12 Lsun, consistent with typical luminous infrared
galaxies.Comment: Accepted for publication in the Astrophysical Journal. Maps are
available at http://blastexperiment.info
Over half of the far-infrared background light comes from galaxies at z >= 1.2
Submillimetre surveys during the past decade have discovered a population of
luminous, high-redshift, dusty starburst galaxies. In the redshift range 1 <= z
<= 4, these massive submillimetre galaxies go through a phase characterized by
optically obscured star formation at rates several hundred times that in the
local Universe. Half of the starlight from this highly energetic process is
absorbed and thermally re-radiated by clouds of dust at temperatures near 30 K
with spectral energy distributions peaking at 100 microns in the rest frame. At
1 <= z <= 4, the peak is redshifted to wavelengths between 200 and 500 microns.
The cumulative effect of these galaxies is to yield extragalactic optical and
far-infrared backgrounds with approximately equal energy densities. Since the
initial detection of the far-infrared background (FIRB), higher-resolution
experiments have sought to decompose this integrated radiation into the
contributions from individual galaxies. Here we report the results of an
extragalactic survey at 250, 350 and 500 microns. Combining our results at 500
microns with those at 24 microns, we determine that all of the FIRB comes from
individual galaxies, with galaxies at z >= 1.2 accounting for 70 per cent of
it. As expected, at the longest wavelengths the signal is dominated by
ultraluminous galaxies at z > 1.Comment: Accepted to Nature. Maps available at http://blastexperiment.info
BLAST: the Redshift Survey
The Balloon-borne Large Aperture Submillimeter Telescope (BLAST) has recently
surveyed ~8.7 deg^2 centered on GOODS-South at 250, 350, and 500 microns. In
Dye et al. (2009) we presented the catalogue of sources detected at 5-sigma in
at least one band in this field and the probable counterparts to these sources
in other wavebands. In this paper, we present the results of a redshift survey
in which we succeeded in measuring redshifts for 82 of these counterparts. The
spectra show that the BLAST counterparts are mostly star-forming galaxies but
not extreme ones when compared to those found in the Sloan Digital Sky Survey.
Roughly one quarter of the BLAST counterparts contain an active nucleus. We
have used the spectroscopic redshifts to carry out a test of the ability of
photometric redshift methods to estimate the redshifts of dusty galaxies,
showing that the standard methods work well even when a galaxy contains a large
amount of dust. We have also investigated the cases where there are two
possible counterparts to the BLAST source, finding that in at least half of
these there is evidence that the two galaxies are physically associated, either
because they are interacting or because they are in the same large-scale
structure. Finally, we have made the first direct measurements of the
luminosity function in the three BLAST bands. We find strong evolution out to
z=1, in the sense that there is a large increase in the space-density of the
most luminous galaxies. We have also investigated the evolution of the
dust-mass function, finding similar strong evolution in the space-density of
the galaxies with the largest dust masses, showing that the luminosity
evolution seen in many wavebands is associated with an increase in the
reservoir of interstellar matter in galaxies.Comment: Accepted for publication in the Astrophysical Journal. Maps and
associated results are available at http://blastexperiment.info
- …