Preparation of OC14S, O18CS, OCS33, and CH3Cl36

In connection with a microwave absorption study of the nuclear spins of isotopes by Professor A. Roberts, formerly of the Physics Department of this University, we were asked to prepare samples of OC14S, O18CS, OCS33, and of CH3Cl36, starting with small quantities of the materials containing the desired isotopes. We believe that the methods employed in the synthesis of these compounds may be of use to other investigators

Chaperone-assisted translocation of a polymer through a nanopore

Using Langevin dynamics simulations, we investigate the dynamics of chaperone-assisted translocation of a flexible polymer through a nanopore. We find that increasing the binding energy $\epsilon$ between the chaperone and the chain and the chaperone concentration $N_c$ can greatly improve the translocation probability. Particularly, with increasing the chaperone concentration a maximum translocation probability is observed for weak binding. For a fixed chaperone concentration, the histogram of translocation time $\tau$ has a transition from long-tailed distribution to Gaussian distribution with increasing $\epsilon$. $\tau$ rapidly decreases and then almost saturates with increasing binding energy for short chain, however, it has a minimum for longer chains at lower chaperone concentration. We also show that $\tau$ has a minimum as a function of the chaperone concentration. For different $\epsilon$, a nonuniversal dependence of $\tau$ on the chain length $N$ is also observed. These results can be interpreted by characteristic entropic effects for flexible polymers induced by either crowding effect from high chaperone concentration or the intersegmental binding for the high binding energy.Comment: 10 pages, to appear in J. Am. Chem. So

Recent Progress on Nonlinear Ultrasonic Testing for Materials Aging in Nuclear Applications

Materials in nuclear power plants are subjected to a variety of time-dependent aging phenomena, depending on their environmental conditions. In many cases, such phenomena cause microstructural changes in the materials before the development of macro scale damage or, eventually, component failure. Nonlinear ultrasonic testing has the potential to probe microstructural characteristics of materials that have undergone aging related changes and can potentially be used to establish structure-property relationships or predict where macro scale damage (e.g., cracking) is likely to occur. In this talk, recent work relating measured material nonlinearity to microstructural changes encountered in nuclear power applications is presented, specifically radiation damage in ferritic steels and weld sensitization in austenitic stainless steels. In the case of radiation damage, it has been established that the formation of BCC Cu nanoprecipitates and changes in dislocation density affect the material nonlinearity. In nonlinearity measurements in the case of weld sensitization (migration of Cr to grain boundaries in the heat affected zone, affecting the local corrosion resistance), it is thought formation of M23C6 carbides at the grain boundaries affects the measured material nonlinearity. Preliminary results are presented

Final Report - Effects of High Spinel and Chromium Oxide Crystal Contents on Simulated HLW Vitrification in DM100 Melter Tests, VSL-09R1520-1, Rev. 0, dated 6/22/09

The principal objective of the work was to evaluate the effects of spinel and chromium oxide particles on WTP HLW melter operations and potential impacts on melter life. This was accomplished through a combination of crucible-scale tests, settling and rheological tests, and tests on the DM100 melter system. Crucible testing was designed to develop and identify HLW glass compositions with high waste loadings that exhibit formation of crystalline spinel and/or chromium oxide phases up to relatively high crystal contents (i.e., > 1 vol%). Characterization of crystal settling and the effects on melt rheology was performed on the HLW glass formulations. Appropriate candidate HLW glass formulations were selected, based on characterization results, to support subsequent melter tests. In the present work, crucible melts were formulated that exhibit up to about 4.4 vol% crystallization

FINAL REPORT START-UP AND COMMISSIONING TESTS ON THE DURAMELTER 1200 HLW PILOT MELTER SYSTEM USING AZ-101 HLW SIMULANTS VSL-01R0100-2 REV 0 1/20/03

This document provides the final report on data and results obtained from commissioning tests performed on the one-third scale DuraMelter{trademark} 1200 (DM 1200) HLW Pilot Melter system that has been installed at VSL with an integrated prototypical off-gas treatment system. That system has replaced the DM1000 system that was used for HLW throughput testing during Part BI [1]. Both melters have similar melt surface areas (1.2 m{sup 2}) but the DM1200 is prototypical of the present RPP-WTP HLW melter design whereas the DM1000 was not. These tests were performed under a corresponding RPP-WTP Test Specification and associated Test Plan. This report is a followup to the previously issued Preliminary Data Summary Report. The DM1200 system will be used for testing and confirmation of basic design, operability, flow sheet, and process control assumptions as well as for support of waste form qualification and permitting. This will include data on processing rates, off-gas treatment system performance, recycle stream compositions, as well as process operability and reliability. Consequently, this system is a key component of the overall HLW vitrification development strategy. The results presented in this report are from the initial series of short-duration tests that were conducted to support the start-up and commissioning of this system prior to conducting the main body of development tests that have been planned for this system. These tests were directed primarily at system 'debugging,' operator training, and procedure refinement. The AZ-101 waste simulant and glass composition that was used for previous testing was selected for these tests

Final Report - Melt Rate Enhancement for High Aluminum HLW Glass Formulation, VSL-08R1360-1, Rev. 0, dated 12/19/08

The principal objective of the work reported here was to develop and identify HLW glass compositions that maximize waste processing rates for the aluminum limted waste composition specified by ORP while maintaining high waste loadings and acceptable glass properties. This was accomplished through a combination of crucible-scale tests, confirmation tests on the DM100 melter system, and demonstration at pilot scale (DM1200). The DM100-BL unit was selected for these tests since it was used previously with the HLW waste streams evaluated in this study, was used for tests on HLW glass compositions to support subsequent tests on the HLW Pilot Melter, conduct tests to determine the effect of various glass properties (viscosity and conductivity) and oxide concentrations on glass production rates with HLW feed streams, and to assess the volatility of cesium and technetium during the vitrification of an HLW AZ-102 composition. The same melter was selected for the present tests in order to maintain comparisons between the previously collected data. These tests provide information on melter processing characteristics and off-gas data, including formation of secondary phases and partitioning. Once DM100 tests were completed, one of the compositions was selected for further testing on the DM1200; the DM1200 system has been used for processing a variety of simulated Hanford waste streams. Tests on the larger melter provide processing data at one third of the scale of the actual WTP HLW melter and, therefore, provide a more accurate and reliable assessment of production rates and potential processing issues. The work focused on maximizing waste processing rates for high aluminum HLW compositions. In view of the diversity of forms of aluminum in the Hanford tanks, tests were also conducted on the DM100 to determine the effect of changes in the form of aluminum on feed properties and production rate. In addition, the work evaluated the effect on production rate of modest increases in melter operating temperature. Glass composition development was based on one of the HLW waste compositions specified by ORP that has a high concentration of aluminum. Small-scale tests were used to provide an initial screening of various glass formulations with respect to melt rates; more definitive screening was provided by the subsequent DM100 tests. Glass properties evaluated included: viscosity, electrical conductivity, crystallinity, gross glass phase separation and the 7- day Product Consistency Test (ASTM-1285). Glass property limits were based upon the reference properties for the WTP HLW melter. However, the WTP crystallinity limit (< 1 vol% at 950oC) was relaxed slightly as a waste loading constraint for the crucible melts

Recovery of the herbaceous layer in the young silver birch and black alder stands that developed spontaneously after a forest fire

The studies, which were conducted in southern Poland, focused on the recovery of the herb layer in 17-year-old post-fire silver birch and black alder forests. Although both types of stands, which are of the same age, developed spontaneously, the alder stands occupied damper sites (with thicker A horizons that survived the fire) than those in the birch forests. We surveyed the migration rates of 44 woodland species, primarily ancient woodland indicators, into both forests and the potential differences in these rates depending on their moisture regime and the community type represented by unburned forests, which were treated as the source of the woodland species pool. Additionally, the role of local depressions with high humidity that were covered by post-fire alder woods in the colonization process, as well as species survivorship and recolonisation, were estimated. Woodland species showed diverse migration paces among the sites; most of them migrated faster on more fertile sites with a higher humidity. Small patches of post-fire alder woods contributed to the recolonisation process since many woodland species in the herb layer survived the fire due to its high humidity, which inhibited the intensity of the forest fire. The recovery of woodland species in post-fire woods is the combined effect of regeneration, which relies on autochthonic propagules, and secondary succession, which is based on allochthonic propagules. Local depressions, which provide refuges for fire-sensitive, dispersal-limited species, contribute to their survivorship and thus to the successive recovery of herbaceous layers after a fire

Development and testing of the Minimum Additive Waste Stabilization (MAWS) system for Fernald wastes. Phase 1, Final report

This report presents results of a treatability study for the evaluation of the MAWS process for wastes stored at the Fernald Environmental Management Project (FEMP) site. Wastes included in the study were FEMP Pit 5 sludges, soil-wash fractions, and ion exchange media from a water treatment system supporting a soil washing system. MAWS offers potential for treating a variety of waste streams to produce a more leach resistant waste form at a lower cost than, say, cement stabilization

Comparative analysis of the intracellular responses to disease-related aggregation-prone proteins

Aggregation-prone proteins (APPs) have been implicated in numerous human diseases but the underlying mechanisms are incompletely understood. Here we comparatively analysed cellular responses to different APPs. Our study is based on a systematic proteomic and phosphoproteomic analysis of a set of yeast proteotoxicity models expressing different human disease-related APPs, which accumulate intracellular APP inclusions and exhibit impaired growth. Clustering and functional enrichment analyses of quantitative proteome-level data reveal that the cellular response to APP expression, including the chaperone response, is specific to the APP, and largely differs from the response to a more generalized proteotoxic insult such as heat shock. We further observe an intriguing association between the subcellular location of inclusions and the location of the cellular response, and provide a rich dataset for future mechanistic studies. Our data suggest that care should be taken when designing research models to study intracellular aggregation, since the cellular response depends markedly on the specific APP and the location of inclusions. Further, therapeutic approaches aimed at boosting protein quality control in protein aggregation diseases should be tailored to the subcellular location affected by inclusion formation. SIGNIFICANCE: We have examined the global cellular response, in terms of protein abundance and phosphorylation changes, to the expression of five human neurodegeneration-associated, aggregation-prone proteins (APPs) in a set of isogenic yeast models. Our results show that the cellular response to each APP is unique to that protein, is different from the response to thermal stress, and is associated with processes at the subcellular location of APP inclusion formation. These results further our understanding of how cells, in a model organism, respond to expression of APPs implicated in neurodegenerative diseases like Parkinson's, Alzheimer's, and ALS. They have implications for mechanisms of toxicity as well as of protective responses in the cell. The specificity of the response to each APP means that research models of these diseases should be tailored to the APP in question. The subcellular localization of the response suggest that therapeutic interventions should also be targeted within the cell