Optimization of the visibility of graphene on poly-Si film by thin-film optics engineering

A multilayer optical system containing poly-Si film, SiO 2 film, and Si substrate (poly-Si substrate) has been designed to enhance the visibility of graphene in contact with poly-Si. Film thicknesses of poly-Si and SiO 2 have been optimized by parametric study of the integral contrast of single layer graphene using transfer matrix theory. The multilayer poly-Si substrate and the most commonly used 285 nm SiO 2 /Si substrate (SiO 2 substrate) have been fabricated. Graphene grown by chemical vapor deposition on Ni catalyst has been transferred to the substrates and the visibility of the graphene on the different substrates has been compared. The samples have been characterized by optical microscope, illuminated with light from halogen lamp, and/or filtered with a 600 nm narrow band optical filter. The contrast of graphene on poly-Si substrate has been increased to near 8.7 under 600 nm narrow band illumination from nearly invisible under ordinary illumination, while the contrast of graphene on SiO 2 remains almost the same. Raman spectroscopy has been used to verify the presence of the single layer graphene on the poly-Si substrate.</p

Fabrication and characterisation of suspended microstructures of tantalum

Funding: UK Engineering and Physical Sciences Research Council (EPSRC).An investigation of the influence of deposition and post-fabrication processes on the final mechanical structure of tantalum beams is reported in the present study. The final deflection profiles of doubly supported beams made from compressive and tensile-stressed films have been studied experimentally. An optimum finite element model has been developed to predict the buckling behaviour of the doubly supported beams by considering the boundary conditions in the form of a compressive stress and an applied load. No matter which etch release method has been used, the initial stress state of the as-deposited films has been found to have a significant impact on the final deflection profile of the fabricated device. The compressive-stressed films have presented larger deflection in the final released beams than the tensile-stressed films. Taking into account the type of etch release methods, the beams that have been released in the dry etch release processes have been found to deform more vertically than those released in the wet-etch release method. Moreover, it has been found that the amplitude of vertical deflection increases with the increase of the beam length and thickness. The results indicate that optimum profiles of tantalum suspended structures can be obtained from the tensile-stressed films that have been released by the wet etching method with an aspect ratio of 1:48.Publisher PDFPeer reviewe

Observation of second flexural mode enhancement in graphene resonators

The enhancement of the second flexural mode in a monolayer graphene resonator by an inhomogeneous electrostatic actuation force has been observed. The devices have been fabricated by transferring the graphene onto a poly-Si/SiO2/Si substrate whereby the poly-Si has been released to produce graphene resonators. Enhancement of the second harmonic has been demonstrated by varying the actuation voltage, achieving an amplitude enhancement of up to 95% of the fundamental mode. The reported findings open new perspectives for graphene resonant sensors with enhanced sensitivity.</p

Rickettsia parkeri in Argentina

Clinical reports of an eschar-associated rickettsiosis in the Paraná River Delta of Argentina prompted an evaluation of Amblyomma triste ticks in this region. When evaluated by PCR, 17 (7.6%) of 223 questing adult A. triste ticks, collected from 2 sites in the lower Paraná River Delta, contained DNA of Rickettsia parkeri

Environmental morphing enables informed dispersal of the dandelion diaspore

Animal migration is highly sensitised to environmental cues, but plant dispersal is considered largely passive. The common dandelion, Taraxacum officinale, bears an intricate haired pappus facilitating flight. The pappus enables the formation of a separated vortex ring during flight; however, the pappus structure is not static but reversibly changes shape by closing in response to moisture. We hypothesised that this leads to changed dispersal properties in response to environmental conditions. Using wind tunnel experiments for flow visualisation, particle image velocimetry, and flight tests we characterised the fluid mechanics effects of the pappus morphing. We also modelled dispersal to understand the impact of pappus morphing on diaspore distribution. Pappus morphing dramatically alters the fluid mechanics of diaspore flight. We found that when the pappus closes in moist conditions, the drag coefficient decreases and thus the falling velocity is greatly increased. Detachment of diaspores from the parent plant also substantially decreases. The change in detachment when the pappus closes increases dispersal distances by reducing diaspore release when wind speeds are low. We propose that moisture-dependent pappus-morphing is a form of informed dispersal allowing rapid responses to changing conditions

A separated vortex ring underlies the flight of the dandelion

Wind-dispersed plants have evolved ingenious ways to lift their seeds1,2. The common dandelion uses a bundle of drag-enhancing bristles (the pappus) that helps to keep their seeds aloft. This passive flight mechanism is highly effective, enabling seed dispersal over formidable distances3,4; however, the physics underpinning pappus-mediated flight remains unresolved. Here we visualized the flow around dandelion seeds, uncovering an extraordinary type of vortex. This vortex is a ring of recirculating fluid, which is detached owing to the flow passing through the pappus. We hypothesized that the circular disk-like geometry and the porosity of the pappus are the key design features that enable the formation of the separated vortex ring. The porosity gradient was surveyed using microfabricated disks, and a disk with a similar porosity was found to be able to recapitulate the flow behaviour of the pappus. The porosity of the dandelion pappus appears to be tuned precisely to stabilize the vortex, while maximizing aerodynamic loading and minimizing material requirements. The discovery of the separated vortex ring provides evidence of the existence of a new class of fluid behaviour around fluid-immersed bodies that may underlie locomotion, weight reduction and particle retention in biological and manmade structures

Metabolite Cross-Feeding Enhances Virulence in a Model Polymicrobial Infection

Microbes within polymicrobial infections often display synergistic interactions resulting in enhanced pathogenesis; however, the molecular mechanisms governing these interactions are not well understood. Development of model systems that allow detailed mechanistic studies of polymicrobial synergy is a critical step towards a comprehensive understanding of these infections in vivo. In this study, we used a model polymicrobial infection including the opportunistic pathogen Aggregatibacter actinomycetemcomitans and the commensal Streptococcus gordonii to examine the importance of metabolite cross-feeding for establishing co-culture infections. Our results reveal that co-culture with S. gordonii enhances the pathogenesis of A. actinomycetemcomitans in a murine abscess model of infection. Interestingly, the ability of A. actinomycetemcomitans to utilize L-lactate as an energy source is essential for these co-culture benefits. Surprisingly, inactivation of L-lactate catabolism had no impact on mono-culture growth in vitro and in vivo suggesting that A. actinomycetemcomitans L-lactate catabolism is only critical for establishing co-culture infections. These results demonstrate that metabolite cross-feeding is critical for A. actinomycetemcomitans to persist in a polymicrobial infection with S. gordonii supporting the idea that the metabolic properties of commensal bacteria alter the course of pathogenesis in polymicrobial communities