The effects of Si-doped prelayers on the optical properties of InGaN/GaN single quantum well structures

In this paper, we report on the effects of including Si-doped (In)GaN prelayers on the low temperature optical properties of a blue-light emitting InGaN/GaN single quantum well. We observed a large blue shift of the photoluminescence peak emission energy and significant increases in the radiative recombination rate for the quantum well structures that incorporated Si-doped prelayers. Simulations of the variation of the conduction and valence band energies show that a strong modification of the band profile occurs for the quantum wells on Si-doped prelayers due to an increase in strength of the surface polarization field. The enhanced surface polarization field opposes the built-in field across the quantum well and thus reduces this built-in electric field. This reduction of the electric field across the quantum well reduces the Quantum Confined Stark Effect and is responsible for the observed blue shift and the change in the recombination dynamics.This work was carried out with the financial support of the United Kingdom Engineering and Physical Sciences Research Council under Grant Nos. EP/I012591/1 and EP/ H011676/1.This is the accepted manuscript version of the article. The final version is available from AIP at http://scitation.aip.org/content/aip/journal/apl/105/9/10.1063/1.4894834

Effect of QW growth temperature on the optical properties of blue and green InGaN/GaN QW structures

In this paper we report on the impact that the quantum well growth temperature has on the internal quantum efficiency and carrier recombination dynamics of two sets of InGaN/GaN multiple quantum well samples, designed to emit at 460 and 530 nm, in which the indium content of the quantum wells within each sample set was maintained. Measurements of the internal quantum efficiency of each sample set showed a systematic variation, with quantum wells grown at a higher temperature exhibiting higher internal quantum efficiency and this variation was preserved at all excitation power densities. By investigating the carrier dynamics at both 10 K and 300 K we were able to attribute this change in internal quantum efficiency to a decrease in the non-radiative recombination rate as the QW growth temperature was increased which we attribute to a decrease in incorporation of the point defects.This work was carried out with the financial support of the United Kingdom Engineering and Physical Sciences Research Council under Grant Nos. EP/I012591/1 and EP/H011676/1.This is the final version of the article. It first appeared from Wiley via https://doi.org/10.1002/pssc.20151018

A comparison of the optical properties of InGaN/GaN multiple quantum well structures grown with and without Si-doped InGaN prelayers

In this paper, we report on a detailed spectroscopic study of the optical properties of InGaN/GaN multiple quantum well structures, both with and without a Si-doped InGaN prelayer. In photoluminescence and photoluminescence excitation spectroscopy, a 2nd emission band, occurring at a higher energy, was identified in the spectrum of the multiple quantum well structure containing the InGaN prelayer, originating from the first quantum well in the stack. Band structure calculations revealed that a reduction in the resultant electric field occurred in the quantum well immediately adjacent to the InGaN prelayer, therefore leading to a reduction in the strength of the quantum confined Stark effect in this quantum well. The partial suppression of the quantum confined Stark effect in this quantum well led to a modified (higher) emission energy and increased radiative recombination rate. Therefore, we ascribed the origin of the high energy emission band to recombination from the 1st quantum well in the structure. Study of the temperature dependent recombination dynamics of both samples showed that the decay time measured across the spectrum was strongly influenced by the 1st quantum well in the stack (in the sample containing the prelayer) leading to a shorter average room temperature lifetime in this sample. The room temperature internal quantum efficiency of the prelayer containing sample was found to be higher than the reference sample (36% compared to 25%) which was thus attributed to the faster radiative recombination rate of the 1st quantum well providing a recombination pathway that is more competitive with non-radiative recombination processes.This work was carried out with the financial support of the United Kingdom Engineering and Physical Sciences Research Council under Grant Nos. EP/I012591/1 and EP/ H011676/1.This is the final version of the article. It first appeared from AIP Publishing via http://dx.doi.org/10.1063/1.494132

Dislocations as channels for the fabrication of sub-surface porous GaN by electrochemical etching

Porosification of nitride semiconductors provides a new paradigm for advanced engineering of the properties of optoelectronic materials. Electrochemical etching creates porosity in doped layers whilst leaving undoped layers undamaged, allowing the realisation of complex three-dimensional porous nanostructures, potentially offering a wide range of functionalities, such as in distributed Bragg reflectors. Porous/non-porous multilayers can be formed by etching whole, as-grown wafers uniformly in one simple process, without any additional processing steps. The etch penetrates from the top down, through the undoped layers, leaving them almost untouched. Here, atomic-resolution electron microscopy is used to show that the etchant accesses the doped layers via nanometre-scale channels that form at dislocation cores and transport the etchant and etch products to and from the doped layer respectively. Results on AlGaN and non-polar GaN multilayers indicate the same mechanism is operating, suggesting this approach may be applicable in a range of materials

Effect of electron blocking layers on the conduction and valence band profiles of InGaN/GaN LEDs

In this paper we investigate the effect of including an electron blocking layer between the quantum well active region and the p-type layers of a light emitting diode has on the conduction and valence band profile of a light emitting diode. Two light emitting diode structures with nominally identical quantum well active regions one containing an electron blocking layer and one without were grown for the purposes of this investigation. The conduction and valence band profiles for both structures were then calculated using a commercially available Schrödinger-Poisson calculator, and a modification to the electric field across the QWs observed. The results of these calculations were then compared to photoluminescence and photoluminescence time decay measurements. The modification in electric field across the quantum wells of the structures resulted in slower radiative recombination in the sample containing an electron blocking layers. The sample containing an electron blocking layer was also found to exhibit a lower internal quantum efficiency, which we attribute to the observed slower radiative recombination lifetime making radiative recombination less competitive.This work was carried out with the financial support of the United Kingdom Engineering and Physical Sciences Research Council under Grant Nos. EP/I012591/1 and EP/H011676/1.This is the final version of the article. It first appeared from Wiley via http://dx.doi.org/10.1002/pssc.20151018

Structure and strain relaxation effects of defects in In<inf>x</inf>Ga<inf>1-x</inf>N epilayers

The formation of trench-defects is observed in 160 nm-thick InxGa1-xN epilayers with x ≤ 0.20, grown on GaN on (0001) sapphire substrates using metalorganic vapour phase epitaxy. The trench-defect density increases with increasing indium content, and high resolution transmission electron microscopy shows an identical structure to those observed previously in InGaN quantum wells, comprising meandering stacking mismatch boundaries connected to an I1-type basal plane stacking fault. These defects do not appear to relieve in-plane compressive strain. Other horizontal sub-interface defects are also observed for these samples and are found to be pre-existing threading dislocations which form half-loops by bending into the basal-plane, and not basal-plane stacking faults, as previously reported by other groups. The origins of these defects are discussed, and are likely to originate from a combination of the small in-plane misorientation of the sapphire substrate and the thermal mismatch strain between the GaN and InGaN layers grown at different temperatures.This work was funded in part by the Cambridge Commonwealth trust and the EPSRC. SKR is funded through the Cambridge-India Partnership Fund and Indian Institute of Technology Bombay via a scholarship. SKR also acknowledges funds from St. John’s College. MAM acknowledges support from the Royal Society through a University Research Fellowship.This is the accepted manuscript version. The final version is available from AIP at http://scitation.aip.org/content/aip/journal/jap/116/10/10.1063/1.4894688

Carrier localization in the vicinity of dislocations in InGaN

We present a multi-microscopy study of dislocations in InGaN, whereby the same threading dislocation was observed under several microscopes (atomic force microscopy, scanning electron microscopy, cathodoluminescence imaging and spectroscopy, transmission electron microscopy), and its morphological optical and structural properties directly correlated. We achieved this across an ensemble of defects large enough to be statistically significant. Our results provide evidence that carrier localization occurs in the direct vicinity of the dislocation through the enhanced formation of In-N chains and atomic condensates, thus limiting non-radiative recombination of carriers at the dislocation core. We highlight that the localization properties in the vicinity of threading dislocations arise as a consequence of the strain field of the individual dislocation and the additional strain field building between interacting neighboring dislocations. Our study therefore suggests that careful strain and dislocation distribution engineering may further improve the resilience of InGaN-based devices to threading dislocations. Besides providing a new understanding of dislocations in InGaN, this paper presents a proof-of-concept for a methodology which is relevant to many problems in materials science.This project is funded in part by the European Research Council under the European Community's Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement No. 279361 (MACONS). The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure InitiativeI3). F.M. would also like to acknowledge the financial support from EPSRC Doctoral Prize Awards and Cambridge Philosophical Society. M.H. would like to acknowledge support from the Lindemann Fellowship

Indium clustering in a -plane InGaN quantum wells as evidenced by atom probe tomography

Atom probe tomography (APT) has been used to characterize the distribution of In atoms within non-polar a-plane InGaN quantum wells (QWs) grown on a GaN pseudo-substrate produced using epitaxial lateral overgrowth. Application of the focused ion beam microscope enabled APT needles to be prepared from the low defect density regions of the grown sample. A complementary analysis was also undertaken on QWs having comparable In contents grown on polar c-plane sample pseudo-substrates. Both frequency distribution and modified nearest neighbor analyses indicate a statistically non-randomized In distribution in the a-plane QWs, but a random distribution in the c-plane QWs. This work not only provides insights into the structure of non-polar a-plane QWs but also shows that APT is capable of detecting as-grown nanoscale clustering in InGaN and thus validates the reliability of earlier APT analyses of the In distribution in c-plane InGaN QWs which show no such clustering.The European Research Council has provided financial support under the European Community’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement No. 279361 (MACONS). This work was also funded in part by the EPSRC (Grant Nos. EP/H047816/1, EP/H0495331 and EP/J003603/1).This is the author accepted manuscript. The final version is available via AIP at http://scitation.aip.org/content/aip/journal/apl/106/7/10.1063/1.4909514

Alloy fluctuations at dislocations in III-Nitrides: identification and impact on optical properties

We investigated alloy fluctuations at dislocations in III-Nitride alloys (InGaN and AlGaN). We found that in both alloys, atom segregation (In segregation in InGaN and Ga segregation in AlGaN) occurs in the tensile part of dislocations with an edge component. In InGaN, In atom segregation leads to an enhanced formation of In-N chains and atomic condensates which act as carrier localization centers. This feature results in a bright spot at the position of the dislocation in the CL images, suggesting that non-radiative recombination at dislocations is impaired. On the other hand, Ga atom segregation at dislocations in AlGaN does not seem to noticeably affect the intensity recorded by CL at the dislocation. This study sheds light on why InGaN-based devices are more resilient to dislocations than AlGaN-based devices. An interesting approach to hinder non-radiative recombination at dislocations may therefore be to dope AlGaN with In.ER

The impact of trench defects in InGaN/GaN light emitting diodes and implications for the "green gap" problem

The impact of trench defects in blue InGaN/GaN light emitting diodes (LEDs) has been investigated. Two mechanisms responsible for the structural degradation of the multiple quantum well (MQW) active region were identified. It was found that during the growth of the p-type GaN capping layer, loss of part of the active region enclosed within a trench defect occurred, affecting the top-most QWs in the MQW stack. Indium platelets and voids were also found to form preferentially at the bottom of the MQW stack. The presence of high densities of trench defects in the LEDs was found to relate to a significant reduction in photoluminescence and electroluminescence emission efficiency, for a range of excitation power densities and drive currents. This reduction in emission efficiency was attributed to an increase in the density of non-radiative recombination centres within the MQW stack, believed to be associated with the stacking mismatch boundaries which form part of the sub-surface structure of the trench defects. Investigation of the surface of green-emitting QW structures found a two decade increase in the density of trench defects, compared to its blue-emitting counterpart, suggesting that the efficiency of green-emitting LEDs may be strongly affected by the presence of these defects. Our results are therefore consistent with a model that the “green gap” problem might relate to localized strain relaxation occurring through defects.This is the accepted manuscript version. The final version is available from AIP at http://scitation.aip.org/content/aip/journal/apl/105/11/10.1063/1.4896279?showFTTab=true&containerItemId=content/aip/journal/apl