1,859 research outputs found
Development of a renewable hybrid power plant with extended utilization of pumped storage unit equipment
The scheme of a renewable hybrid power plant with the extended use of the installed equipment of the pumped storage unit for the conversion of the photovoltaic and wind generators direct current to the alternating one is proposed. The scheme is based on existing components with widely used proven technology. To output the power of solar and wind generators to the grid and for DC to AC conversion, a synchronous generator of the pumped storage unit is used in addition to grid inverters. An induction motor, powered through a variable frequency drive from a common DC bus, is used together with a hydraulic turbine to rotate the generator. In addition, batteries and capacitors banks are connected to the DC bus. The possibility of using various types of electric machines to drive a synchronous generator is analyzed and the preference of an induction motor is shown. The response of an induction motor to rotational speed fluctuations is modeled and its capability to participate in the network frequency regulation is shown. With the example of a typical daily load and generation profile, it is shown that the proposed solution for DC to AC conversion has an efficiency close to that of the grid inverter. The proposed scheme of the hybrid power plant can increase the reliability of renewable energy sources and the stability of the network frequency. This is achieved due to increasing the inertia of the rotating masses in the power system, the power factor control capabilities of the synchronous generator and the proper response of induction motor to rapid fluctuations of the rotation speed. The creation of such hybrid power plants opens the way for a further increase in the share of renewable energy sources in the power system.Запропоновано схему гібридної відновлюваної електричної станції з розширеним використанням встановленого обладнання гідроакумулюючого блока для перетворення постійного струму фотоелектричних та вітрових генераторів в змінний. Схема базується на наявних компонентах з широко використовуваною відпрацьованою технологією. Для видачі потужності та перетворення постійного струму сонячних та вітрових генераторів в змінний окрім мережевих інверторів використовується синхронний генератор гідроакумулюючого блоку. Для обертання генератора крім гідротурбіни також використовується асинхронний двигун, підключений через частотно-регульований привод до загальної шини постійного струму станції. Крім того, до шини постійного струму підключені електрохімічні акумулятори і батареї конденсаторів. Проаналізовано можливість використання різних типів електричних машин для приводу синхронного генератора і показано перевагу асинхронного двигуна. Змодельовано реакцію асинхронного двигуна на коливання швидкості обертання і показано його здатність брати участь в регулюванні частоти мережі. На прикладі типового добового графіка
навантаження і генерації показано, що запропоноване рішення по перетворенню постійного струму в змінний має ККД, близький до ККД мережевого інвертора. Запропонована схема гібридної станції дозволяє підвищити надійність роботи відновлюваних джерел енергії і стабільність частоти мережі. Це досягається завдяки збільшенню інерції обертових мас в енергосистемі, можливості управління коефіцієнтом потужності синхронного генератора і властивій асинхронному двигуну реакції на коливання швидкості обертання. Створення таких гібридних станцій відкриває шлях до подальшого збільшення частки відновлюваних джерел в енергосистемі
Identification of nonlinear vibrating structures: Part I -- Formulation
A self-starting multistage, time-domain procedure is presented for the identification of nonlinear, multi-degree-of-freedom systems undergoing free oscillations or subjected to arbitrary direct force excitations and/or nonuniform support motions. Recursive least-squares parameter estimation methods combined with nonparametric identification techniques are used to represent, with sufficient accuracy, the identified system in a form that allows the convenient prediction of its transient response under excitations that differ from the test signals. The utility of this procedure is demonstrated in a companion paper
Identification of nonlinear vibrating structures: Part II -- Applications
A time-domain procedure for the identification of nonlinear vibrating structures, presented in a companion paper, is applied to a "calibration" problem which incorporates realistic test situations and nonlinear structural characteristics widely encountered in the applied mechanics field. The "data" set is analyzed to develop suitable, approximate nonlinear system representations. Subsequently, a "validation" test is conducted to demonstrate the range of validity of the method under discussion. It is shown that the procedure furnishes a convenient means for constructing reduced-order nonlinear nonparametric mathematical models of reasonably high fidelity in regard to reproducing the response of the test article under dynamic loads that differ from the identification test loads
Competing Interactions among Supramolecular Structures on Surfaces
A simple model was constructed to describe the polar ordering of
non-centrosymmetric supramolecular aggregates formed by self assembling
triblock rodcoil polymers. The aggregates are modeled as dipoles in a lattice
with an Ising-like penalty associated with reversing the orientation of nearest
neighbor dipoles. The choice of the potentials is based on experimental results
and structural features of the supramolecular objects. For films of finite
thickness, we find a periodic structure along an arbitrary direction
perpendicular to the substrate normal, where the repeat unit is composed of two
equal width domains with dipole up and dipole down configuration. When a short
range interaction between the surface and the dipoles is included the balance
between the up and down dipole domains is broken. Our results suggest that due
to surface effects, films of finite thickness have a none zero macroscopic
polarization, and that the polarization per unit volume appears to be a
function of film thickness.Comment: 3 pages, 3 eps figure
Recommended from our members
Client-server-based LBS architecture: A novel positioning module for improved positioning performance
Permission to distribute obtained from publisher.This work presents a new efficient positioning module that operates over client-server LBS architectures. The
aim of the proposed module is to fulfil the position information requirements for LBS pedestrian applications
by ensuring the availability of reliable, highly accurate and precise position solutions based on GPS single
frequency (L1) positioning service. The positioning module operates at both LBS architecture sides; the client
(mobile device), and the server (positioning server). At the server side, the positioning module is responsible
for correcting user’s location information based on WADGPS corrections. In addition, at the mobile side,
the positioning module is continually in charge for monitoring the integrity and available of the position
solutions as well as managing the communication with the server. The integrity monitoring was based on
EGNOS integrity methods. A prototype of the proposed module was developed and used in experimental trials
to evaluate the efficiency of the module in terms of the achieved positioning performance. The positioning
module was capable of achieving a horizontal accuracy of less than 2 meters with a 95% confidence level
with integrity improvement of more than 30% from existing GPS/EGNOS services
Heart ventricular histology and microvasculature together with aortic histology and elastic lamellar structure: A comparison of a novel dual-purpose to a broiler chicken line
The use of dual-purpose chickens is a strategy to avoid killing one-day-old male chicks of egg laying lines. Lohmann Dual (LD) is a novel dual-purpose chicken line created by the crossbreeding of layer and broiler lines. However, many of the cardiovascular diseases of broilers are likely to be associated with intensive genetic selection for growth and feed conversion efficiency. This study aimed to compare the macroscopic and microscopic structure of the heart and the aorta of the LD chicken line with that of the broiler chicken line, Ross 308 (Ross) under typical husbandry conditions for meat production. Eighty, one-day-old male chicks of each line were housed for 5 weeks (Ross) and 9 weeks (LD). Six birds of each line were sampled weekly. Heart mass, thickness of ventricular walls, cardiomyocyte size and blood capillary density as well as aortic diameter and thickness, number of elastic lamellae and elastic fiber percentage in the aortic wall were determined. The growth patterns of the heart were the same in the two lines. Although LD chickens had a lower absolute heart mass than that of Ross chickens, the relative heart mass in both lines was similar. The cardiomyocytes of LD chickens were larger than those of Ross’s of the same body weight (BW), nevertheless both lines had similar thicknesses of their ventricular walls. The blood capillary density was greater in the LD heart than in that of the Ross heart. The aorta of LD chickens had proportionally; a greater aortic lumen radius, larger numbers of elastic lamellae and more elastic fibers than in Ross chickens. Our results suggest that the heart and aorta of the LD chickens have not been disadvantaged by their intensive genetic selection; furthermore, LD chickens have a better myocardial capillary supply and better aortic mechanical properties than those of Ross chickens
- …