37,335 research outputs found
Comparison of Structural Concepts for Transport Aircraft with a Tail Cone Turbine
An evaluation of three structural concepts for an advanced aircraft design with a tail cone turbine is presented. Structural models were developed using an innovative rapid finite element modeling tool called Conceptual Design Shop (CDS). CDS is an attempt to fill a gap in current finite element modeling software to automatically connect wings and tails to the fuselage with sufficient support structure in airframe models. For comparison with actual aircraft structures, a model of a transport aircraft design developed using CDS is compared with published structural weight data for a Boeing 737-200. A method for computing aerodynamic stability parameters from an MSC/NASTRAN finite element analysis output deck is also discussed. Finally, the weight effects for using a tail cone turbine in an advanced transport aircraft design are evaluated by comparing three composite structural models, for which component thicknesses and cross-sections are sized by the Hypersizer software
Quantum fluctuations in the spiral phase of the Hubbard model
We study the magnetic excitations in the spiral phase of the two--dimensional
Hubbard model using a functional integral method. Spin waves are strongly
renormalized and a line of near--zeros is observed in the spectrum around the
spiral pitch . The possibility of disordered spiral states is
examined by studying the one--loop corrections to the spiral order parameter.
We also show that the spiral phase presents an intrinsic instability towards an
inhomogeneous state (phase separation, CDW, ...) at weak doping. Though phase
separation is suppressed by weak long--range Coulomb interactions, the CDW
instability only disappears for sufficiently strong Coulomb interaction.Comment: Figures are NOW appended via uuencoded postscript fil
Yoga practice in the UK: a cross- sectional survey of motivation, health benefits and behaviours
Objectives Despite the popularity of yoga and evidence of its positive effects on physical and mental health, little is known about yoga practice in the UK. This study investigated the characteristics of people who practise yoga, reasons for initiating and maintaining practice, and perceived impact of yoga on health and well-being.
Design, setting and participants A cross-sectional online anonymous survey distributed through UK-based yoga organisations, studios and events, through email invites and flyers. 2434 yoga practitioners completed the survey, including 903 yoga teachers: 87% were women, 91% white and 71% degree educated; mean age was 48.7 years.
Main outcome measures Perceived impact of yoga on health conditions, health outcomes and injuries. Relationships between yoga practice and measures of health, lifestyle, stress and well-being.
Results In comparison with national population norms, participants reported significantly higher well-being but also higher anxiety; lower perceived stress, body mass index and incidence of obesity, and higher rates of positive health behaviours. 47% reported changing their motivations to practise yoga, with general wellness and fitness key to initial uptake, and stress management and spirituality important to current practice. 16% of participants reported starting yoga to manage a physical or mental health condition. Respondents reported the value of yoga for a wide range of health conditions, most notably for musculoskeletal and mental health conditions. 20.7% reported at least one yoga-related injury over their lifetime. Controlling for demographic factors, frequency of yoga practice accounted for small but significant variance in health-related regression models (p<0.001).
Conclusion The findings of this first detailed UK survey were consistent with surveys in other Western countries. Yoga was perceived to have a positive impact on physical and mental health conditions and was linked to positive health behaviours. Further investigation of yoga’s role in self-care could inform health-related challenges faced by many countries
Networks, Options and Preemption.
This paper examines the irreversible adoption of a technology whose returns are uncertain, when there is an advantage to being the first adopter, but a network advantage to adopting when others also do so. Two patterns of adoption emerge: sequential, in which the leader aggressively preempts its rival; and a more accommodating outcome in which the firms adopt simultaneously.TECHNOLOGY ; NETWORK ANALYSIS ; EFFICIENCY
Functional anatomy of the middle and inner ears of the red fox, in comparison to domestic dogs and cats
Anatomical middle and inner ear parameters are often used to predict hearing sensitivities of mammalian species. Given that ear morphology is substantially affected both by phylogeny and body size, it is interesting to consider whether the relatively small anatomical differences expected in related species of similar size have a noticeable impact on hearing. We present a detailed anatomical description of the middle and inner ears of the red fox Vulpes vulpes, a widespread, wild carnivore for which a behavioural audiogram is available. We compare fox ears to those of the well‐studied and similarly sized domestic dog and cat, taking data for dogs and cats from the literature as well as providing new measurements of basilar membrane (BM) length and hair cell numbers and densities in these animals. Our results show that the middle ear of the red fox is very similar to that of dogs. The most obvious difference from that of the cat is the lack of a fully formed bony septum in the bulla tympanica of the fox. The cochlear structures of the fox, however, are very like those of the cat, whereas dogs have a broader BM in the basal cochlea. We further report that the mass of the middle ear ossicles and the bulla volume increase with age in foxes. Overall, the ear structures of foxes, dogs and cats are anatomically very similar, and their behavioural audiograms overlap. However, the results of several published models and correlations that use middle and inner ear measurements to predict aspects of hearing were not always found to match well with audiogram data, especially when it came to the sharper tuning in the fox audiogram. This highlights that, although there is evidently a broad correspondence between structure and function, it is not always possible to draw direct links when considering more subtle differences between related species
Hi-alpha forebody design. Part 1: Methodology base and initial parametrics
The use of Computational Fluid Dynamics (CFD) has been investigated for the analysis and design of aircraft forebodies at high angle of attack combined with sideslip. The results of the investigation show that CFD has reached a level of development where computational methods can be used for high angle of attack aerodynamic design. The classic wind tunnel experiment for the F-5A forebody directional stability has been reproduced computationally over an angle of attack range from 10 degrees to 45 degrees, and good agreement with experimental data was obtained. Computations have also been made at combined angle of attack and sideslip over a chine forebody, demonstrating the qualitative features of the flow, although not producing good agreement with measured experimental pressure distributions. The computations were performed using the code known as cfl3D for both the Euler equations and the Reynolds equations using a form of the Baldwin-Lomax turbulence model. To study the relation between forebody shape and directional stability characteristics, a generic parametric forebody model has been defined which provides a simple analytic math model with flexibility to capture the key shape characteristics of the entire range of forebodies of interest, including chines
Hi-alpha forebody design. Part 2: Determination of body shapes for positive directional stability
Computational Fluid Dynamics (CFD) has been used to study aircraft forebody flowfields at low speed high angle-of-attack conditions with sideslip. The purpose is to define forebody geometries which provide good directional stability characteristics under these conditions. The flows of the F-5A forebody and Erickson forebody were recomputed with better and refined grids. The results were obtained using a modified version of cfl3d to solve either the Euler equations or the Reynolds equations employing a form of the Baldwin-Lomax turbulence model. Based on those results, we conclude that current CFD methods can be used to investigate the aerodynamic characteristics of forebodies to achieve desirable high angle-of-attack characteristics. An analytically defined generic forebody model is described, and a systematic study of forebody shapes was then conducted to determine which shapes promote a positive contribution to directional stability at high angle-of-attack. A novel way of presenting the results is used to illustrate how the positive contribution arises. Based on the results of this initial parametric study, some guidelines for aerodynamic design to promote positive directional stability are presented
Field dependence of gaseous ion mobility: Test of approximate formulas
The accuracies of three approximate formulas were tested by comparison with special cases for which accurate results could be found. The Wannier free flight theory was found to be superior, and can be extended to yield a formula without further adjustable constants that gives an exact result at low electric fields and good results at medium and high fields. It is applicable for any ion neutral force law and mass ratio
A computational examination of directional stability for smooth and chined forebodies at high-alpha
Computational Fluid Dynamics (CFD) has been used to study aircraft forebody flowfields at low-speed, angle-of-attack conditions with sideslip. The purpose is to define forebody geometries which provide good directional stability characteristics under these conditions. The flows over the experimentally investigated F-5A forebody and chine type configuration, previously computed by the authors, were recomputed with better grid topology and resolution. The results were obtained using a modified version of CFL3D (developed at NASA Langley) to solve either the Euler equations or the Reynolds equations employing the Baldwin-Lomax turbulence model with the Degani-Schiff modification to account for massive crossflow separation. Based on the results, it is concluded that current CFD methods can be used to investigate the aerodynamic characteristics of forebodies to achieve desirable high angle-of-attack characteristics. An analytically defined generic forebody model is described, and a parametric study of various forebody shapes was then conducted to determine which shapes promote a positive contribution to directional stability at high angle-of-attack. An unconventional approach for presenting the results is used to illustrate how the positive contribution arises. Based on the results of this initial parametric study, some guidelines for aerodynamic design to promote positive directional stability are presented
NASTRAN solutions of problems described by simultaneous parabolic differential equations
NASTRAN solution techniques are shown for a numerical analysis of a class of coupled vector flow processes described by simultaneous parabolic differential equations. To define one physical problem type where equations of this form arise, the differential equations describing the coupled transfers of heat and mass in mechanical equilibrium with negligible mass average velocity are presented and discussed. Also shown are the equations describing seepage when both electrokinetic and hydrodynamic forces occur. Based on a variational statement of the general problem type, the concepts of scalar transfer elements and parallel element systems are introduced. It is shown that adoptation of these concepts allows the direct use of NASTRAN's existing Laplace type elements for uncoupled flow (the heat transfer elements) for treating multicomponent coupled transfer. Sample problems are included which demonstrate the application of these techniques for both steady-state and transient problems
- …