79 research outputs found
Interleukin 6, lipopolysaccharide-binding protein and interleukin 10 in the prediction of risk and etiologic patterns in patients with community-acquired pneumonia: results from the German competence network CAPNETZ
<p>Abstract</p> <p>Background</p> <p>The aim of our study was to investigate the predictive value of the biomarkers interleukin 6 (IL-6), interleukin 10 (IL-10) and lipopolysaccharide-binding protein (LBP) compared with clinical CRB and CRB-65 severity scores in patients with community-acquired pneumonia (CAP).</p> <p>Methods</p> <p>Samples and data were obtained from patients enrolled into the German CAPNETZ study group. Samples (blood, sputum and urine) were collected within 24 h of first presentation and inclusion in the CAPNETZ study, and CRB and CRB-65 scores were determined for all patients at the time of enrollment. The combined end point representative of a severe course of CAP was defined as mechanical ventilation, intensive care unit treatment and/or death within 30 days. Overall, a total of 1,000 patients were enrolled in the study. A severe course of CAP was observed in 105 (10.5%) patients.</p> <p>Results</p> <p>The highest IL-6, IL-10 and LBP concentrations were found in patients with CRB-65 scores of 3-4 or CRB scores of 2-3. IL-6 and LBP levels on enrollment in the study were significantly higher for patients with a severe course of CAP than for those who did not have severe CAP. In receiver operating characteristic analyses, the area under the curve values for of IL-6 (0.689), IL-10 (0.665) and LPB (0.624) in a severe course of CAP were lower than that of CRB-65 (0.764) and similar to that of CRB (0.69). The accuracy of both CRB and CRB-65 was increased significantly by including IL-6 measurements. In addition, higher cytokine concentrations were found in patients with typical bacterial infections compared with patients with atypical or viral infections and those with infection of unknown etiology. LBP showed the highest discriminatory power with respect to the etiology of infection.</p> <p>Conclusions</p> <p>IL-6, IL-10 and LBP concentrations were increased in patients with a CRB-65 score of 3-4 and a severe course of CAP. The concentrations of IL-6 and IL-10 reflected the severity of disease in patients with CAP. The predictive power of IL-6, IL-10 and LBP for a severe course of pneumonia was lower than that of CRB-65. Typical bacterial pathogens induced the highest LBP, IL-6 and IL-10 concentrations.</p
Recommended from our members
Consistency and Standardization of Color in Medical Imaging: a Consensus Report
This article summarizes the consensus reached at the Summit on Color in Medical Imaging held at the Food and Drug Administration (FDA) on May 8–9, 2013, co-sponsored by the FDA and ICC (International Color Consortium). The purpose of the meeting was to gather information on how color is currently handled by medical imaging systems to identify areas where there is a need for improvement, to define objective requirements, and to facilitate consensus development of best practices. Participants were asked to identify areas of concern and unmet needs. This summary documents the topics that were discussed at the meeting and recommendations that were made by the participants. Key areas identified where improvements in color would provide immediate tangible benefits were those of digital microscopy, telemedicine, medical photography (particularly ophthalmic and dental photography), and display calibration. Work in these and other related areas has been started within several professional groups, including the creation of the ICC Medical Imaging Working Group
Risk of ischaemic heart disease and acute myocardial infarction in a Spanish population: observational prospective study in a primary-care setting
BACKGROUND: Ischaemic heart disease is a global priority of health-care policy, because of its social repercussions and its impact on the health-care system. Yet there is little information on coronary morbidity in Spain and on the effect of the principal risk factors on risk of coronary heart disease. The objective of this study is to describe the epidemiology of coronary disease (incidence, mortality and its association with cardiovascular risk factors) using the information gathered by primary care practitioners on cardiovascular health of their population. METHODS: A prospective study was designed. Eight primary-care centres participated, each contributing to the constitution of the cohort with the entire population covered by the centre. A total of 6124 men and women aged over 25 years and free of cardiovascular disease agreed to participate and were thus enrolled and followed-up, with all fatal and non-fatal coronary disease episodes being registered during a 5-year period. Repeated measurements were collected on smoking, blood pressure, weight and height, serum total cholesterol, high-density and low-density lipoproteins and fasting glucose. Rates were calculated for acute myocardial infarction and ischaemic heart disease. Associations between cardiovascular risk factors and coronary disease-free survival were evaluated using Kaplan-Meier and Cox regression analyses. RESULTS: Mean age at recruitment was 51.6 ± 15, with 24% of patients being over 65. At baseline, 74% of patients were overweight, serum cholesterol over 240 was present in 35% of patients, arterial hypertension in 37%, and basal glucose over 126 in 11%. Thirty-four percent of men and 13% of women were current smokers. During follow-up, 155 first episodes of coronary disease were detected, which yielded age-adjusted rates of 362 and 191 per 100,000 person-years in men and women respectively. Disease-free survival was associated with all risk factors in univariate analyses. After multivariate adjustments, age, male gender, smoking, high total cholesterol, high HDL/LDL ratio, diabetes and overweight remained strongly associated with risk. Relative risks for hypertension in women and for diabetes in men did not reach statistical significance. CONCLUSION: Despite high prevalence of vascular risk factors, incidence rates were lower than those reported for other countries and other periods, but similar to those reported in the few population-based studies in Spain. Effect measures of vascular risk factors were mainly as reported worldwide and support the hypothesis that protective factors not considered in this study must exist as to explain low rates. This study shows the feasibility of conducting epidemiological cohort studies in primary-care settings
Inflammatory parameters predict etiologic patterns but do not allow for individual prediction of etiology in patients with CAP – Results from the German competence network CAPNETZ
<p>Abstract</p> <p>Background</p> <p>Aim of this study was to evaluate the correlation of inflammatory markers procalcitonin (PCT), C-reactive protein (CRP) and leukocyte count (WBC) with microbiological etiology of CAP.</p> <p>Methods</p> <p>We enrolled 1337 patients (62 ± 18 y, 45% f) with proven CAP. Extensive microbiological workup was performed. In all patients PCT, CRP, WBC and CRB-65 score were determined. Patients were classified according to microbial diagnosis and CRB-65 score.</p> <p>Results</p> <p>In patients with typical bacterial CAP, levels of PCT, CRP and WBC were significantly higher compared to CAP of atypical or viral etiology. There were no significant differences in PCT, CRP and WBC in patients with atypical or viral etiology of CAP. In contrast to CRP and WBC, PCT markedly increased with severity of CAP as measured by CRB-65 score (p < 0.0001). In ROC analysis for discrimination of patients with CRB-65 scores > 1, AUC for PCT was 0.69 (95% CI 0.66 to 0.71), which was higher compared to CRP and WBC (p < 0.0001). CRB-65, PCT, CRP and WBC were higher (p < 0.0001) in hospitalised patients in comparison to outpatients.</p> <p>Conclusion</p> <p>PCT, CRP and WBC are highest in typical bacterial etiology in CAP but do not allow individual prediction of etiology. In contrast to CRP and WBC, PCT is useful in severity assessment of CAP.</p
Force-Field Compensation in a Manual Tracking Task
This study addresses force/movement control in a dynamic “hybrid” task: the master sub-task is continuous manual tracking of a target moving along an eight-shaped Lissajous figure, with the tracking error as the primary performance index; the slave sub-task is compensation of a disturbing curl viscous field, compatibly with the primary performance index. The two sub-tasks are correlated because the lateral force the subject must exert on the eight-shape must be proportional to the longitudinal movement speed in order to perform a good tracking. The results confirm that visuo-manual tracking is characterized by an intermittent control mechanism, in agreement with previous work; the novel finding is that the overall control patterns are not altered by the presence of a large deviating force field, if compared with the undisturbed condition. It is also found that the control of interaction-forces is achieved by a combination of arm stiffness properties and direct force control, as suggested by the systematic lateral deviation of the trajectories from the nominal path and the comparison between perturbed trials and catch trials. The coordination of the two sub-tasks is quickly learnt after the activation of the deviating force field and is achieved by a combination of force and the stiffness components (about 80% vs. 20%), which is a function of the implicit accuracy of the tracking task
Host factors do not influence the colonization or infection by fluconazole resistant Candida species in hospitalized patients
Nosocomial yeast infections have significantly increased during the past two decades in industrialized countries, including Taiwan. This has been associated with the emergence of resistance to fluconazole and other antifungal drugs. The medical records of 88 patients, colonized or infected with Candida species, from nine of the 22 hospitals that provided clinical isolates to the Taiwan Surveillance of Antimicrobial Resistance of Yeasts (TSARY) program in 1999 were reviewed. A total of 35 patients contributed fluconazole resistant strains [minimum inhibitory concentrations (MICs) ≧ 64 mg/l], while the remaining 53 patients contributed susceptible ones (MICs ≦ 8 mg/l). Fluconazole resistance was more frequent among isolates of Candida tropicalis (46.5%) than either C. albicans (36.8%) or C. glabrata (30.8%). There was no significant difference in demographic characteristics or underlying diseases among patients contributing strains different in drug susceptibility
Baseline thrombospondin-1 concentrations are not associated with mortality in septic patients: a single-center cohort study on the intensive care unit
Stochastic finite element model assessing length effect for unreinforced masonry walls subjected to one-way vertical bending under out-of-plane loading
The strength of unreinforced masonry (URM) walls subjected to one-way vertical bending under out-of-plane loading (no pre-compression) is known to be affected by the tensile bond strength. Factors such as batching, workmanship, and environmental exposure alter the strength of this bond, resulting in spatial variability for any URM assembly. In narrow wall panels a single weak joint may dictate the failure load of a masonry wall, whereas for longer walls there is higher potential for weak joints to occur and load redistribution. This paper focuses on a stochastic assessment of clay brick URM walls with spatially variable tensile bond strength subjected to uniformly distributed out-of-plane loads in one-way vertical bending and assessing the effect of wall length on the ultimate failure load. Stochastic computational modelling combining 3D non-linear Finite Element Analysis (FEA) and Monte Carlo Simulation (MCS) is used to account for bond strength variability when estimating the walls ultimate failure loads. For this assessment FEA MCS has been applied to a set of existing test data for walls 1, 2, 4, and 10 units long, by ten different masons. Models were also developed to consider walls in the intermediate length range, 7 units long, and walls outside of this range, 15 units long. For each set of simulations the peak pressure and load–displacement data was extracted and analysed, showing agreement with the results of wall test data. The panel strength is shown to increase with wall length from 1 to 4 units, then stabilize with further length increase. The variability of the failure load is shown to decrease with increasing wall length
- …