Nutrient supply from organic amendments applied to unvegetated soil, lettuce and orchardgrass

Organic sources of nutrients are increasingly being used in horticultural and certified organic production. The nutrient-supplying potentials of poultry manure compost (PM), feather meal (FM), alfalfa meal (AA) and vermicastings (VC) and an unamended control were measured in a growth room experiment. The amendments were applied at rates equivalent to 200, 400 and 800 kg total N ha-1 to a soil of low fertility. Nitrogen supply rates and concentrations were measured over 6 mo in unvegetated pots using PRS™ probes and KCl extraction, respectively. Biomass of lettuce (Lactuca sativa L.) and orchardgrass (Dactylis glomerata L.) and N uptake of orchardgrass were measured. Repeated measures analysis revealed significant amendment × rate × time interaction effects for N supply rate and concentration. Of total N applied, available N was 50 to 70% in the FM and PM treatments, 10 to 40% in the AA treatments, and 10% in the VC treatments. High rates of FM and PM were toxic to lettuce but produced good orchardgrass yields. VC was safe for lettuce but low N availability limited long-term orchardgrass growth. Higher application rates did not result in corresponding increases in nutrient supply. Consideration should be given to balancing the ratio of available nutrients in amendments with plant requirements

Use of AlInN layers in optical monitoring of growth of GaN-based structures on free-standing GaN substrates

When lattice matched to GaN, the AlInN ternary alloy has a refractive index ~7% lower than that of GaN. This characteristic can be exploited to perform in situ reflectometry during epitaxial growth of GaN-based multilayer structures on free-standing GaN substrates, by insertion of a suitable Al0.82In0.18N layer. The real-time information on growth rates and cumulative layer thicknesses thus obtainable is particularly valuable in the growth of optical resonant cavity structures. We illustrate this capability with reference to the growth of InGaN/GaN multiple quantum-well structures, including a doubly periodic structure with relatively thick GaN spacer layers between groups of wells. Al0.82In0.18N insertion layers can also assist in the fabrication of resonant cavity structures in postgrowth processing, for example, acting as sacrificial layers in a lift-off process exploiting etch selectivity between Al0.82In0.18N and GaN

Quantum dot emission from site-controlled ngan/gan micropyramid arrays

InxGa1−xN quantum dots have been fabricated by the selective growth of GaN micropyramid arrays topped with InGaN/GaN quantum wells. The spatially, spectrally, and time-resolved emission properties of these structures were measured using cathodoluminescence hyperspectral imaging and low-temperature microphotoluminescence spectroscopy. The presence of InGaN quantum dots was confirmed directly by the observation of sharp peaks in the emission spectrum at the pyramid apices. These luminescence peaks exhibit decay lifetimes of approximately 0.5 ns, with linewidths down to 650 me

Site multiplicity of rare earth ions in III-nitrides

This presentation reviews recent lattice location studies of RE ions in GaN by electron emission channelling (EC) and X-ray absorption fine structure (XAFS) techniques. These studies agree that RE ions at low concentrations (whether they are incorporated during growth or introduced later by ion implantation) predominantly occupy Ga substitutional sites, as expected from considerations of charge equivalence. We combine this result with some examples of the welldocumented richness of optical spectra of GaN:RE3+ to suggest that the luminescence of these materials may be ascribed to a family of rather similar sites, all of which feature the REGa defect

Optical spectroscopy of gan microcavities with thicknesses controlled using a plasma etch-back

The effect of an etch-back step to control the cavity length within GaN-based microcavities formed between two dielectric Bragg mirrors was investigated using photoluminescence and reflectivity. The structures are fabricated using a combination of a laser lift-off technique to separate epitaxial III-N layers from their sapphire substrates and electron-beam evaporation to deposit silica/zirconia multilayer mirrors. The photoluminescence measurements reveal cavity modes from both etched and nonetched microcavities. Similar cavity finesses are measured for 2.0 and 0.8 mm GaN cavities fabricated from the same wafer, indicating that the etchback has had little effect on the microcavity quality. For InGaN quantum well samples the etchback is shown to allow controllable reduction of the cavity length. Two etch steps of 100 nm are demonstrated with an accuracy of approximately 5%. The etchback, achieved using inductively coupled plasma and wet chemical etching, allows removal of the low-quality GaN nucleation layer, control of the cavity length, and modification of the surface resulting from lift-off

(In,Ga)N/GaN microcavities with double dielectric mirrors fabricated by selective removal of an (Al,In)N sacrificial layer

Comparable microcavities with 3/2 (~240 nm) active regions containing distributed (In,Ga)N quantum wells, grown on GaN substrates and bounded by two dielectric mirrors, have been fabricated by two different routes: one using laser lift-off to process structures grown on GaN-on-sapphire templates and the second using freestanding GaN substrates, which are initially processed by mechanical thinning. Both exploit the properties of an Al0.83In0.17N layer, lattice matched to the GaN substrate and spacer layers. In both cases cavity quality factors >400 are demonstrated by measurements of the cavity-filtered room-temperature excitonic emission near 410 nm

Discounting in Games across Time Scales

We introduce two-level discounted games played by two players on a perfect-information stochastic game graph. The upper level game is a discounted game and the lower level game is an undiscounted reachability game. Two-level games model hierarchical and sequential decision making under uncertainty across different time scales. We show the existence of pure memoryless optimal strategies for both players and an ordered field property for such games. We show that if there is only one player (Markov decision processes), then the values can be computed in polynomial time. It follows that whether the value of a player is equal to a given rational constant in two-level discounted games can be decided in NP intersected coNP. We also give an alternate strategy improvement algorithm to compute the value

Water surface height determination with a GPS wave glider: a demonstration in Loch Ness, Scotland

A geodetic GPS receiver has been installed on a Wave Glider, an unmanned water surface vehicle. Using kinematic precise point positioning (PPP) GPS, which operates globally without directly requiring reference stations, surface heights are measured with ~0.05-m precision. The GPS Wave Glider was tested in Loch Ness, Scotland, by measuring the gradient of the loch’s surface height. The experiment took place under mild weather, with virtually no wind setup along the loch and a wave field made mostly of ripples and wavelets. Under these conditions, the loch’s surface height gradient should be approximately equal to the geoid slope. The PPP surface height gradient and that of the Earth Gravitational Model 2008 geoid heights do indeed agree on average along the loch (0.03 m km−1). Also detected are 1) ~0.05-m-sized height changes due to daily water pumping for hydroelectricity generation and 2) high-frequency (0.25–0.5 Hz) oscillations caused by surface waves. The PPP heights compare favorably (~0.02-m standard deviation) with relative carrier phase–based GPS processing. This suggests that GPS Wave Gliders have the potential to autonomously determine centimeter-precise water surface heights globally for lake modeling, and also for applications such as ocean modeling and geoid/mean dynamic topography determination, at least for benign surface states such as those encountered during the reported experiment

Analyzing the heterogeneity of farmers’ preferences for improvements in dairy cow traits using farmer typologies

AbstractGiving consideration to farmers’ preferences for improvements in animal traits when designing genetic selection tools such as selection indexes might increase the uptake of these tools. The increase in use of genetic selection tools will, in turn, assist in the realization of genetic gain in breeding programs. However, the determination of farmers’ preferences is not trivial because of its large heterogeneity. The aim of this study was to quantify Australian dairy farmers’ preferences for cow trait improvements to inform and ultimately direct the choice of traits and selection indexes in the 2014 review of the National Breeding Objective. A specific aim was to analyze the heterogeneity of preferences for cow trait improvements by determining whether there are farmer types that can be identified with specific patterns of preferences. We analyzed whether farmer types differed in farming system, socioeconomic profile, and attitudes toward breeding and genetic evaluation tools. An online survey was developed to explore farmers’ preferences for improvement in 13 cow traits. The pairwise comparisons method was used to derive a ranking of the traits for each respondent. A total of 551 farmers fully completed the survey. A principal component analysis followed by a Ward hierarchical cluster analysis was used to group farmers according to their preferences. Three types of farmers were determined: (1) production-focused farmers, who gave the highest preference of all for improvements in protein yield, lactation persistency, feed efficiency, cow live weight, and milking speed; (2) functionality-focused farmers with the highest preferences of all for improvements in mastitis, lameness, and calving difficulty; and (3) type-focused farmers with the highest preferences of all for mammary system and type. Farmer types differed in their age, their attitudes toward genetic selection, and in the selection criteria they use. Surprisingly, farmer types did not differ for herd size, calving, feeding system, or breed. These results support the idea that preferences for cow trait improvements are intrinsic to farmers and not to production systems or breeds. As a result of this study, and some bioeconomic modeling (not included in this study), the Australian dairy industry has implemented a main index and 2 alternative indexes targeting the different farmer types described here