68,636 research outputs found
Programmable parametric filter with noise generator and data acquisition
Audio filtering systems are used in commercial applications involving equalizers. However, some of the topologies used can be modified to be used in audio signal treatment applications. Parametric filter topologies allow the user to modify independently the central frequency of the filter, the bandwidth and the gain. Using a microprocessor and programmable components will allow the user to modify the parameters of the filter and to acquire the filtered signal so it can be processed in other stages. To improve the functionality of the system, a server will be implemented to process the data sent by the user, will be sent afterwards to the microcontroller. Finally, the results obtained will be thrown back to the user.Postprint (published version
Renewable energies course for Energy Engineering students at the Technical University of Catalonia (UPC)
Since September 2016, the Technical University of Catalonia (Universitat Politècnica de Catalunya, UPC) – BarcelonaTech has a new Campus in Barcelona City, the Diagonal-Besòs Campus. In this new Campus appears the Eastern Barcelona School of Engineering (Escola d’Enginyeria de Barcelona Est, EEBE), with new Bachelor’s and Master’s Degrees. In this framework, also since September 2016, the EEBE is offering the new 4-year Bachelor’s Degree in Energy Engineering with a total number of 240 ECTS credits. Current article deals with the inclusion of the course about sizing and design of renewable energy systems in the context of this degree. In particular, and although this topic was eventually abandoned in the initial degree curriculum, the paper presents the development of a 3rd-year course, Renewable Energies, that focuses on this topic.Postprint (published version
Design of an output-capacitorless low-dropout regulator for power management applications
This article aims to present the design of a 4.5-V, 450-mA low drop-out (LDO) voltage linear regulator based on a twostage cascoded operational transconductance amplifier (OTA) as error amplifier. The aforementioned two-stage OTA is designed with cascoded current mirroring technique to boost up the output impedance. The proposed OTA has a DC gain of 101 dB under no load condition. The designed reference voltage included in the LDO regulator is provided by a band gap reference with the temperature coefficient (T¿) of 0.025 mV/ºC. The proposed LDO regulator has a maximum drop-out voltage of 0.5 V @ 450 mA of load current, and has the worst case power supply rejection ratio (PSRR) of [54.5 dB, 34.3 dB] @ [100 Hz, 10 kHz] in full load condition. All the proposed circuits are designed using a 0.35 µm CMOS technology. The design is checked in order to corroborate its performance for wide range of input voltage, founding that the circuit design works fine meeting all the initial specification requirements.Postprint (published version
The use of power gyrator structures as energy processing cells in photovoltaic solar facilities
This paper will provide a classification of high efficiency switching power-gyrator structures and their use as cells for energy processing in photovoltaic solar facilities. Having into account the properties of these topologies presented in the article, their inclusion in solar facilities allows increasing the performance of the whole installation. Thus, the design, simulation and implementation of a G-type power gyrator are carried out throughout the text. In addition, in order to obtain the maximum power from the photovoltaic solar panel, a maximum power point tracking (MPPT) is mandatory in the energy processing path. Therefore, the practical implementation carried out includes a control loop of the power gyrator in order to track the aforementioned maximum power point of the photovoltaic solar panel.Postprint (published version
Output-capacitorless low-dropout regulator for power management applications
This article aims to present the design of a 4.5-V, 450-mA low drop-out (LDO) voltage linear regulator based on a two-stage cascoded operational transconductance amplifier (OTA) as error amplifier. The aforementioned two-stage OTA is designed with cascoded current mirroring technique to boost up the output impedance. The proposed OTA has a DC gain of 101 dB under no load condition. The designed reference voltage included in the LDO regulator is provided by a band gap reference with the temperature coefficient (T¿) of 0.025 mV/ºC. The proposed LDO regulator has a maximum drop-out voltage of 0.5 V @ 450 mA of load current, and has the worst case power supply rejection ratio (PSRR) of [54.5 dB, 34.3 dB] @ [100 Hz, 10 kHz] in full load condition. All the proposed circuits are designed using a 0.35 µm CMOS technology. The design is checked in order to corroborate its performance for wide range of input voltage, founding that the circuit design works fine meeting all the initial specification requirements.Postprint (published version
Linear-assisted DC/DC converters with modified current-mode control applied to photovoltaic solar systems
This article shows the proposal of a current-mode one-cycle control for linear-assisted DC/DC converters. Linearassisted DC/DC converters are structures that allow to take advantages of the two classic alternatives in the design of power supply systems: voltage linear regulators (classic NPN topology or LDO –low dropout–) and switching DC/DC converters. The current-mode one-cycle control technique is proposed in order to obtain the duty cycle of the linear-assisted converter switch. The proposed structure can provide an output with suitable load and line regulations. Thus, the paper shows the design and simulation results of the proposed current-mode one-cycle linear-assisted converter.Postprint (published version
Efficient LDO-Assisted DC/DC buck converter for integrated power management system
DC-DC Switching Converters; Voltage Linear Regulators; Linear-Assisted DC-DC Voltage Regulators.Postprint (published version
The use of power DC-DC converters and gyrator structures for energy processing
This article provides a classification of high efficiency switching power-gyrator structures and their use as cells for energy processing in photovoltaic solar facilities. Having into account the properties of these topologies presented in the article, their inclusion in solar facilities allows increasing the performance of the whole installation. Thus, the design, simulation and implementation of a G-type power gyrator are carried out throughout the text. In addition, in order to obtain the maximum power from the photovoltaic solar panel, a maximum power point tracking (MPPT) is mandatory in the energy processing path. Therefore, the practical implementation carried out includes a control loop of the power gyrator in order to track the aforementioned maximum power point of the photovoltaic solar panel.Postprint (published version
Capacitorless DC–DC regulator as a candidate topology for photovoltaic solar facilities
Postprint (published version
- …