355 research outputs found
A 3D full-field study of cracks in a nuclear graphite under mode I and mode II cyclic dwell loading conditions
Three‐dimensional (3D) full‐field deformation around crack tips in a nuclear graphite has been studied under mode I and mode II cyclic dwell loading conditions using digital volume correlation (DVC) and integrated finite element (FE) analysis. A cracked Brazilian disk specimen of Gilsocarbon graphite was tested at selected loading angles to achieve mode I and mode II cyclic dwell loading conditions. Integrated FE analysis was carried out with the 3D displacement fields measured by DVC injected into the FE model, from which the crack driving force J‐integral was obtained using a damaged plasticity material model. The evolution of near‐tip strains and the J‐integral during the cyclic dwell loading was examined. Under cyclic dwell, residual strain accumulation was observed for the first time. The results shed some light on the effect of dwell time on the 3D crack deformation and crack driving force in Gilsocarbon under cyclic mode I and II loading conditions
Micro-mechanical testing by fibre pushout of the BN interlayer in SiCf/SiC composites for aero-propulsion
Ceramic Matrix Composites (CMC’s) are finding renewed interest in the aerospace community for use as high temperature components in engines due to the potential for cooling air reductions over metallic parts, amongst other benefits such as weight saving and improving the turbine blade clearance. Quasi-brittle SiCf/SiC composites are toughened by the application of a boron nitride interphase coating to the fibre, which allows for cracks to deviate from the matrix. The principal issues faced by SiC-based composites lie in their degradation in corrosive environments (changing the interphase region and embrittling the overall composite) and their current inadequacy to adopt performance life models. Therefore, maintaining the interfacial properties of the composite at high temperatures is crucial. The extraction of these said properties has however proven itself to be a major engineering challenge in materials science. A few meso-scale and macro-scale techniques such as the transverse bend test and the Brazilian disc compression test have shown experimental reproducibility but are unsupported by sufficient modelling. The most accurate method for determining the properties at the micro-scale remains the push-out method on singular fibres. Herein the talk will present current both advances in using the fibre push-out method and some of the challenges to overcome with push-outs in order to accurately measure the interfacial shear stresses, coefficients of friction and residual compressive stresses at the fibre/matrix interface. The push-out method will be contrasted to the fibre push-back and push-in techniques and a novel \u27via\u27 push-out method will be introduced. Finally, suggestions for improving the method to corroborate with ongoing modelling work will be showcased
J-integral analysis: an EDXD and DIC comparative study for a fatigue crack
Synchrotron Energy Dispersive X-ray Diffraction (EDXD) and Digital Image Correlation (DIC) have been applied to map simultaneously the 2D elastic strain and displacement fields of a propagating fatigue crack in the HAZ of a welded Cr2Ni4MoV bainitic steel. The position of the crack tip was tracked via a phase congruency analysis of the displacement field, and also by detection of its cyclic plastic zone. Both types of full field data provided independent inputs to finite element/J-integral analyses that directly quantified the elastic cyclic stress intensity factor range applied to the crack. No knowledge was required of the specimen geometry, crack length or applied loads. The agreement between the two analyses in this controlled study shows that strain mapping by synchrotron EDXD can provide a reliable method to study the crack fields in more complex problems, such as interactions between crack closure, residual stresses and applied loading
An iterative method for reference pattern selection in high-resolution electron backscatter diffraction (HR-EBSD)
For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-crystal silicon, which showed that the effect is not only limited to measurement magnitude but also spatial distribution. An empirical relationship was then identified between the cross-correlation parameter and angular error, which was used in an iterative algorithm to identify the optimal reference pattern that maximises the precision of HR-EBSD
J-integral analysis: An EDXD and DIC comparative study for a fatigue crack
Synchrotron Energy Dispersive X-ray Diffraction (EDXD) and Digital Image Correlation (DIC) have been applied to map simultaneously the 2D elastic strain and displacement fields of a propagating fatigue crack in the HAZ of a welded Cr2Ni4MoV bainitic steel. The position of the crack tip was tracked via a phase congruency analysis of the displacement field, and also by detection of its cyclic plastic zone. Both types of full field data provided independent inputs to finite element/J-integral analyses that directly quantified the elastic cyclic stress intensity factor range applied to the crack. No knowledge was required of the specimen geometry, crack length or applied loads. The agreement between the two analyses in this controlled study shows that strain mapping by synchrotron EDXD can provide a reliable method to study the crack fields in more complex problems, such as interactions between crack closure, residual stresses and applied loading
Influence of milling on the development of stress corrosion cracks in austenitic stainless steel
Contact processes with long-range interactions
A class of non-local contact processes is introduced and studied using
mean-field approximation and numerical simulations. In these processes
particles are created at a rate which decays algebraically with the distance
from the nearest particle. It is found that the transition into the absorbing
state is continuous and is characterized by continuously varying critical
exponents. This model differs from the previously studied non-local directed
percolation model, where particles are created by unrestricted Levy flights. It
is motivated by recent studies of non-equilibrium wetting indicating that this
type of non-local processes play a role in the unbinding transition. Other
non-local processes which have been suggested to exist within the context of
wetting are considered as well.Comment: Accepted with minor revisions by Journal of Statistical Mechanics:
Theory and experiment
Validating 3D two-parameter fracture mechanics models for structural integrity assessments
In-situ fracture tests were carried out on the I12 beamline at the Diamond Light Source. Four Al-Ti metal-matrix composites (MMCs), with two crack lengths, were studied to assess for the impact of in-plane constraint. Synchrotron X-ray computed tomography and synchrotron X-ray diffraction were used to measure total strain and elastic strain respectively. In this work, the measured elastic strains in the samples are detailed as a function of applied load and compared against those predicted from a 3D elastic-plastic finite element model. The modelled strains increased asymptotically towards the tip of the electro discharge machined notch. The experimental results do not highlight the same response, which is due to a combination of blunting and low experimental spatial resolution. Far field experimental and measured strain fields converged, notably in the test piece containing a long notch (a/W = 0.5) and higher levels of constraint
HR-EBSD analysis of in situ stable crack growth at the micron scale
Understanding the local fracture resistance of microstructural features. such
as brittle inclusions, coatings, and interfaces at the microscale under complex
loading conditions is critical for microstructure-informed design of materials.
In this study, a novel approach has been formulated to decompose the J-integral
evaluation of the elastic energy release rate to the three-dimensional stress
intensity factors directly from experimental measurements of the elastic
deformation gradient tensors of the crack field by in situ high (angular)
resolution electron backscatter diffraction (HR-EBSD). An exemplar study is
presented of a quasi-static crack, inclined to the observed surface,
propagating on low index {hkl} planes in a (001) single crystal silicon wafer
Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis
X-ray diffraction contrast tomography (DCT) is a technique for mapping grain shape and orientation in plastically undeformed polycrystals. In this paper, we describe a modified DCT data acquisition strategy which permits the incorporation of an innovative Friedel pair method for analyzing diffraction data. Diffraction spots are acquired during a 360 degree rotation of the sample and are analyzed in terms of the Friedel pairs ((hkl) and (hkl -) reflections, observed 180 degrees apart in rotation). The resulting increase in the accuracy with which the diffraction vectors are determined allows the use of improved algorithms for grain indexing (assigning diffraction spots to the grains from which they arise) and reconstruction. The accuracy of the resulting grain maps is quantified with reference to synchrotron microtomography data for a specimen made from a beta titanium system in which a second phase can be precipitated at grain boundaries, thereby revealing the grain shapes. The simple changes introduced to the DCT methodology are equally applicable to other variants of grain mapping. Copyright 2009 American Institute of Physics
- …