Effect of Ce-base mischmetal addition on the microstructure and mechanical properties of hot-rolled ZK60 alloy

Mg-Zn-Zr (ZK) alloys exhibit notably high mechanical strength amongst all magnesium alloy grades. However, due to the formation of low melting point Mg3Zn7-precipitates, these alloys are susceptible to hot cracking, thus compromising their metallurgical processing. The addition of rare earths to ZK alloys is an alternative to form higher melting point intermetallic compounds, speed up dynamic recrystallization, refine grain size, enhance corrosion resistance and extend the service temperature due to improved creep resistance. This work deals with the effect of Ce-base mischmetal addition on the hot rolling behaviour of as-cast ZK60 alloy. The microstructure investigation conducted using electron microscopy and X-Ray diffraction shows that precipitation of Mg7Zn3 intermetallics occur during hot rolling, whereas no further precipitation is observed for the ZK60-Mm alloys. The fragmentation of the intermetallic compounds occur during hot rolling and finer particles of Mg7Zn3 are observed for the ZK60, whereas Mg7Zn3 and MgZn2Ce intermetallics are formed in the alloy modified with mischmetal addition. A higher fraction of dynamically recrystallized grains is observed for the ZK60-Mm in comparison to the ZK60. Continuous recrystallization takes place in ZK60 with the formation of sub-grains near to the intermetallics and the addition of mischmetal promotes the occurrence of discontinuous recrystallization with the nucleation of new grains close to the precipitates. The mechanical strength and, in particular, the ductility of the hot-rolled alloys are notably improved when compared to the same alloys in the as-cast condition. The mechanical strength is, however, higher for the ZK60 alloy. Less solid solution strengthening, softer MgZn2Ce intermetallics and more extensive recrystallization contribute to reduce the mechanical strength of ZK60-Mm. Failure in both alloys are initiated at coarse intermetallics and propagate through intermetallic-rich regions

The use of a task through virtual reality in cerebral palsy using two different interaction devices (concrete and abstract) - a cross-sectional randomized study.

BACKGROUND: Cerebral Palsy (CP) is characterised by variable difficulties in muscular action, resulting in inability of the individual to perform functional movement. An option to provide functionality to the individual with CP is the use of computer innovation. The aim of this paper was to verify if there was any performance improvement in a task performed in a virtual environment and if there was transfer to the task performed in the real environment and vice versa in this population. METHODS: A computer program was developed comprising a motor task, but with two possibilities of user interaction: a) concrete interface (with physical contact): in which the individual touches the computer screen to finish the task and b) abstract interface (no physical contact): in which the individual performs a hand movement in front of the Kinect device. Participants were split into two groups. The experimental group consisted of 28 individuals with CP within the ages of 6 and 15 years old. The control group included 28 typically developing individuals mirroring the age and sex of the experimental group. RESULTS: Individuals from both groups were able to improve task performance and retain acquired information. The CP group presented worse performance than the control group in all phases of the study. Further findings showed that the CP group presented better performance in the abstract interface than in the concrete interface, whereas, in the control group, the opposite occurred: their best performance was in the concrete. CONCLUSIONS: Motor tasks performed by individuals with CP through an interface with a more virtual environment feature (abstract interface: Kinect) provided better performance when compared to an interface with a more real characteristic (concrete interface: Touchscreen). TRIAL REGISTRATION: ClinicalTrials.gov Identifier - NCT03352440; Date of registration - November 17, 2017

Scaling predictions for radii of weakly bound triatomic molecules

The mean-square radii of the molecules $^4$He$_3$, $^4$He$_2-^6$Li, $^4$He$_2-^7$Li and $^4$He$_2-^{23}$Na are calculated using a three-body model with contact interactions. They are obtained from a universal scaling function calculated within a renormalized scheme for three particles interacting through pairwise Dirac-delta interaction. The root-mean-square distance between two atoms of mass $m_A$ in a triatomic molecule are estimated to be of de order of ${\cal C}\sqrt{\hbar^2/[m_A(E_3-E_2)]}$, where $E_2$ is the dimer and $E_3$ the trimer binding energies, and ${\cal C}$ is a constant (varying from $\sim 0.6$ to $\sim 1$) that depends on the ratio between $E_2$ and $E_3$. Considering previous estimates for the trimer energies, we also predict the sizes of Rubidium and Sodium trimers in atomic traps.Comment: 7 pages, 2 figure

Portuguese Ministers, 1851-1999: Social Background and Paths to Power

Disponível em: http://193.136.113.6/Opac/Pages/Search/Results.aspx?SearchText=UID=bb8aa8d5-c6b6-466a-81bb-fe8a67693cee&DataBase=10449_UNLFCSHThis paper provides an empirical analysis of the impact of regime changes in the composition and patterns of recruitment of the Portuguese ministerial elite throughout the last 150 years. The ‘out-of-type’, violent nature of most regime transformations accounts for the purges in and the extensive replacements of the political personnel, namely of the uppermost officeholders. In the case of Cabinet members, such discontinuities did not imply, however, radical changes in their social profile. Although there were some significant variations, a series of salient characteristics have persisted over time. The typical Portuguese minister is a male in his midforties, of middle-class origin and predominantly urban-born, highly educated and with a state servant background. The two main occupational contingents have been university professors - except for the First Republic (1910-26) - and the military, the latter having only recently been eclipsed with the consolidation of contemporary democracy. As regards career pathways, the most striking feature is the secular trend for the declining role of parliamentary experience, which the democratic regime did not clearly reverse. In this period, a technocratic background rather than political experience has been indeed the privileged credential for a significant proportion of minister