Effects of different geometric patterns on free form gridshell structures

Gridshells are commonly known as structures with the shape and rigidity of a double curvature shell consisting of a grid, not a continuous surface. In recent decades, these structures have attracted significant attention. The impact of various geometric patterns on free form gridshell structures is investigated here to demonstrate the necessity of collaboration between structural and architectural characteristics in enhancing structure efficiency. To that goal, a framework is proposed where three shells are first designed, and then six geometric patterns are formed on them. The main factors for evaluation of gridshells are decreasing the steel weight as an economic index and decreasing the displacement as a structural index, also, finite element method is used for structurally analyzing the gridshells, and the generated gridshells are compared to each other based on the mentioned indices. For the optimization process, an approach is suggested to find the most optimum gridshell, then numerical results show the efficiency of the proposed alternative approach

Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces

© 2020 Elsevier Ltd In the present research, the general aim is to understand further the potential effect of the surface shape and geometrical specification of rectangular parallel fins developed on the surface on the heat transfer coefficient, bubble formation, and fouling of the nanoparticles. To achieve this, the boiling thermal performance of the copper oxide nano-suspension (NS) was quantified on the modified surfaces with different geometrical specifications, including the width and height of the fins and space between fins. Results showed that the designed fins reduce the rate of the fouling of the nanoparticles on the boiling surface such that the best thermal performance was achieved for the surface modified with the fins with more towering height and smaller width. Also, the fouling thermal resistance was found to follow an asymptotic behaviour while developing three regions of inception, growth, and equilibrium. During the inception of fouling, negative values were measured for the fouling thermal resistance, which was attributed to the enhancement in the specific surface area and thermal performance of the system. Overall, the presence of the fins improved the thermal performance of the system in comparison with the plain surface

Mathematical Modeling for Nanofluids Simulation: A Review of the Latest Works

Exploiting nanofluids in thermal systems is growing day by day. Nanofluids having ultrafine solid particles promise new working fluids for application in energy devices. Many studies have been conducted on thermophysical properties as well as heat and fluid flow characteristics of nanofluids in various systems to discover their advantages compared to conventional working fluids. The main aim of this study is to present the latest developments and progress in the mathematical modeling of nanofluids flow. For this purpose, a comprehensive review of different nanofluid computational fluid dynamics (CFD) approaches is carried out. This study provides detailed information about the commonly used formulations as well as techniques for mathematical modeling of nanofluids. In addition, advantages and disadvantages of each method are rendered to find the most appropriate approach, which can give valid results

Two-phase frictional pressure drop with pure refrigerants in vertical mini/micro-channels

Environmental concerns have urged a search for eco-friendly refrigerants in the refrigeration industry to overcome ozone depletion and global warming problems. Therefore, current research emphasizes frictional pressure drop during flow boiling of environment-friendly refrigerants (GWP\u3c150), isobutane, HFC-152a, HFO-1234yf were tested against commonly reported HFC-134a. The data presented here was collected under heat flux-controlled conditions; the test piece was a round tube (1.60 mm diameter). The data collection was performed at 27 and 32 °C with mass velocities in 50-500 kg/m2s range. Effects of critical controlling parameters, like heat flux, mass velocity, exit vapor quality, operating pressure and medium, were studied in detail. It was observed that pressure drop increases along with mass velocity increment in the test piece and increases with exit vapor quality increment. The same was noticed to decrease with saturation temperature increment. Parametric effects and prediction of assessment methods are reported

Experimental investigation on compression ignition engine powered with pentanol and thevetia peruviana methyl ester under reactivity controlled compression ignition mode of operation

In the current study, an effort is carried out to study the influence of pentanol as low reactive fuel (LRF) along with diesel and Thevetia peruviana methyl ester (TPME) as high reactive fuels (HRF) in reactivity controlled compression ignition (RCCI) engine. The experiments are conducted on dual fuel engine at 50% load for RCCI mode of operation by varying pentanol percentage in injected fuels. The results revealed that RCCI mode of operation at 10% of pentanol in injected fuels exhibited higher brake thermal efficiency (BTE) of 22.15% for diesel and pentanol fuel combination, which is about 9.1% and 27.3% higher than other B20 and pentanol, B100 and pentanol fuel combinations respectively. As the percentage of pentanol increased in injected fuels, hydrocarbon (HC) and carbon monoxide (CO) emissions are increased while nitrogen oxide (NOx) and smoke emissions are decreased. Among various fuel combinations tested diesel and pentanol fuel combination gives lower HC, CO and smoke emissions and higher NOx emissions. At 10% pentanol in injected fuels, the highest heat release rate (HRR) and in-cylinder pressure are found for diesel and pentanol fuel combinations compared with other fuels

A detailed hydrothermal investigation of a helical micro double-tube heat exchanger for a wide range of helix pitch length

The present study was numerically inquired the heat transfer performance and fluid flow characteristic of a helical micro double-tube heat exchanger (HMDTHX) using the finite volume method. The tube length was considered to be constantly equal to 30 mm, and 12 different configurations were modeled by changing in turn number and pitch length (P) for Reynolds numbers of 50, 100, 150, and 200. The findings indicated that the heat transfer would enhance by applying any helix angle in the straight tube. However, it had an optimum point which varied by Reynolds number (Re). Rising Re caused overall heat transfer coefficient (OHTC), pressure drop, and pumping power augment for all cases. Increasing P in overall reduced OHTC, pressure drop, and pumping power which had different maximum points between P = 0.5 to 3. Maximum overall heat transfer coefficient (OHTC) enhancement was equal to 45% for Re = 200 and P = 2. Also, maximum effectiveness was 11.5% for P = 2 and Re = 200. Moreover, a 42% maximum increment was achieved for pressure drop, pumping power, and friction factor at Re = 200 and P = 2. Shear stress for Re = 100 to 200 showed that the values are almost the same for P = 0.5 and 1. Then by increasing P, the shear stress decreases. While, for Re = 50, a maximum is seen at P = 2. The temperature distribution was indicated that the maximum temperature of the straight tube and helical tube are the same, but the difference is in the average temperature, which was 3.2 K between straight and helical tubes. Finally, by investigating the velocity contour, it was determined that a secondary flow through the HMDTHX, affected by centrifugal force, was existed, enhancing the fluid flow turbulency and heat transfer rate

Isotherm, kinetic and modeling studies

Funding Information: Funding: The Deanship of Scientific Research at King Khalid University General Research Project under the grant number (R.G.P.2/138/42) and Taif University researchers supporting project number (TURSP–2020/157), Taif University, Taif, Saudi Arabia. Funding Information: Acknowledgments: The co‐author Ali E. Anqi would like to extend his appreciation to the Deanship of Scientific Research at King Khalid University for the support he received through General Re‐ search Project under the grant number (R.G.P.2/138/42). This work was supported by Taif Univer‐ sity researchers supporting project number (TURSP–2020/157), Taif University, Taif, Saudi Arabia. The first author was thankful to the Directorate of Minorities, Govt. of Karnataka for providing PhD fellowship to conduct the research. Publisher Copyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland.The first-ever use of halloysite nanotube (HNT), a relatively low-cost nanomaterial abun-dantly available with minor toxicity for removing brilliant green dye from aqueous media, is re-ported. The factors affecting adsorption were studied by assessing the adsorption capacity, kinetics, and equilibrium thermodynamic properties. All the experiments were designed at a pH level of around 7. The Redlich-Peterson isotherm model fits best amongst the nine isotherm models studied. The kinetic studies data confirmed a pseudo model of the second order. Robotic investigations pro-pose a rate-controlling advance being overwhelmed by intraparticle dispersion. The adsorbent fea-tures were interpreted using infrared spectroscopy and electron microscopy. Process optimization was carried out using Response Surface Methodology (RSM) through a dual section Fractional Fac-torial Experimental Design to contemplate the impact of boundaries on the course of adsorption. The examination of fluctuation (ANOVA) was utilized to consider the joined impact of the boundaries. The possibilities of the use of dye adsorbing HNT (“sludge”) for the fabrication of the composites using plastic waste are suggested.publishersversionpublishe

A recent study on remediation of direct blue 15 dye using halloysite nanotubes

R.G.P.2/138/42 TURSP–2020/157A set of lab‐scale experiments were designed and conducted to remedy Direct Blue 15 (DB15) dye using nontoxic halloysite nanotubes (HNT) with the view to be utilized in a textile industrial effluent (TIE). The DB15 adsorbed‐HNT “sludge” was used as a reinforcing agent and plas-tic waste to fabricate the composite. To advance the knowledge and further understand the chemical phenomena associated with DB15 adsorption on HNT, different factors like pH value, adsorbate initial concentration, adsorbent dosage, and temperature on the composite were affected experi-mentally tested. To estimate the adsorption capacity of HNT, nine isotherm models were applied, and it was identified that the Brouers–Sotolongo adsorption isotherm model represented the best accuracy for predicting the adsorption behavior of the HNT. Likewise, the pseudo‐second‐order reaction was the predominant mechanism for the overall rate of the multi‐step dye adsorption pro-cess. Additionally, it was demonstrated that the mass transfer during the process is diffusion‐con-trolled, and thermodynamic assessments showed that the process is physisorption.publishersversionpublishe

Improving the Gridshells’ Regularity by Using Evolutionary Techniques

Designing and optimizing gridshell structures have been very attractive problems in the last decades. In this work, two indexes are introduced as “length ratio” and “shape ratio” to measure the regularity of a gridshell and are compared to the existing indexes in the literature. Two evolutionary techniques, genetic algorithm (GA) and particle swarm optimization (PSO) method, are utilized to improve the gridshells’ regularity by using the indexes. An approach is presented to generate the initial gridshells for a given surface in MATLAB. The two methods are implemented in MATLAB and compared on three benchmarks with different Gaussian curvatures. For each grid, both triangular and quadrangular meshes are generated. Experimental results show that the regularity of some gridshell is improved more than 50%, the regularity of quadrangular gridshells can be improved more than the regularity of triangular gridshells on the same surfaces, and there may be some relationship between Gaussian curvature of a surface and the improvement percentage of generated gridshells on it. Moreover, it is seen that PSO technique outperforms GA technique slightly in almost all the considered test problems. Finally, the Dolan–Moré performance profile is produced to compare the two methods according to running times