Conductive Buffer Layers and Overlayers for the Thermal Stability of Coated Conductors

We analyze fundamental issues related to the thermal and electrical stability of a coated conductor during its operation. We address the role of conductive buffer layers in the stability of Ni-based coated conductors, and the effect of a metallic cap layer on the electrical properties of Ni alloy-based superconducting tapes. For the first case we report on the fabrication of a fully conductive RABiTS architecture formed of bilayers of conductive oxides SrRuO3 and LaNiO3 on textured Ni tapes. For the second case we discuss measurements of current-voltage relations on Ag/YBa2Cu3O7-d and Cu/Ag/ YBa2Cu3O7-d prototype multilayers on insulating substrates. Limitations on the overall tape structure and properties that are posed by the stability requirement are presented.Comment: 4 pages, 5 figure

High energy density aluminum battery

Compositions and methods of making are provided for a high energy density aluminum battery. The battery comprises an anode comprising aluminum metal. The battery further comprises a cathode comprising a material capable of intercalating aluminum or lithium ions during a discharge cycle and deintercalating the aluminum or lithium ions during a charge cycle. The battery further comprises an electrolyte capable of supporting reversible deposition and stripping of aluminum at the anode, and reversible intercalation and deintercalation of aluminum or lithium at the cathode.Board of Regents, University of Texas Syste

Comparative Life Cycle Assessment of Injection Molded and Big Area Additive Manufactured NdFeB Bonded Permanent Magnets

Permanent magnets are expected to play a crucial role in the realization of the clean economy. In particular, the neodymium–iron–boron (Nd2Fe14B or NdFeB) magnets, which have the highest energy density among rare earth permanent magnets, are needed for building more efficient windmill generators, electric vehicle motors, etc. Currently, near-net shape magnets can be either made through sintering and compression molding with extensive post machining or directly through injection molding. However, injection molding has a loading volume fraction limitation of 0.65 for nylon binders. A novel method of manufacturing bonded permanent magnets with loading fraction greater than 0.65 has been demonstrated using big area additive manufacturing (BAAM) printers. As energy density is directly proportional to the square of the magnet loading fraction, magnets produced using BAAM printers require less volume and magnetic material compared to that of injection molded magnets on average. A comparative life cycle assessment shows that this difference in magnetic powder consumption nearly constitutes the difference in the environmental impact categories. Even after assuming recycled magnetic input, the BAAM magnets perform better environmentally than injection molded magnets, especially in the ozone depletion category. Since BAAM printers can accommodate even higher loading fractions, at scale, BAAM printers possibly can bring about a significant decrease in rare earth mineral consumption and environmental emissions. Furthermore, single screw extrusion enables BAAM printers to have high print speeds and allow them to be economically competitive against injection molding. Therefore, BAAM printed magnets show great promise in transitioning towards the clean economy.This is a manuscript of an article published as Kulkarni, Sameer, Fu Zhao, Ikenna C. Nlebedim, Robert Fredette, and Mariappan Parans Paranthaman. "Comparative Life Cycle Assessment of Injection Molded and Big Area Additive Manufactured NdFeB Bonded Permanent Magnets." Journal of Manufacturing Science and Engineering 145, no. 5 (2023): 051001. DOI: 10.1115/1.4056489. Copyright 2023 ASME. Posted with permission. DOE Contract Number(s): AC02-07CH11358; AC05-00OR2272

Thermal stability of anisotropic bonded magnets prepared by additive manufacturing

In this research, anisotropic NdFeB + SmFeN hybrid and NdFeB bonded magnets are additively printed in a polyphenylene sulfide (PPS) polymer binder. Printed NdFeB + SmFeN PPS bonded magnets displayed excellent magnetic properties (Br [remanence] = 6.9 kG [0.69 T], Hcj [coercivity] = 8.3 kOe [660 kA/m], and BHmax [energy product] = 9.9 MGOe [79 kJ/m3]) with superior corrosion resistance and thermal stability. The anisotropic NdFeB bonded magnet shows a high coercivity of 14.6 kOe (1162 kA/m) with a BHmax of 8.7 MGOe (69 kJ/m3). The coercivity and remanence temperature coefficients for NdFeB + SmFeN hybrid bonded magnets are −0.10%/K and −0.46%/K, and for NdFeB bonded magnets are −0.14%/K and −0.53%/K in the range of 300–400 K, indicating that the hybrid bonded magnets are thermally stable. The average flux aging loss for hybrid magnets was also determined to be very stable over 2000 h at 448 K (175°C) in air with 2.04% compared to that of NdFeB magnets with 3.62%.This article is published as Gandha, Kinjal, Mariappan Parans Paranthaman, Haobo Wang, Xubo Liu, and Ikenna C. Nlebedim. "Thermal stability of anisotropic bonded magnets prepared by additive manufacturing." Journal of the American Ceramic Society 106, no. 1 (2023): 166-171. DOI: 10.1111/jace.18609 Copyright 2022 The Author(s). Attribution 4.0 International (CC BY 4.0). Posted with permission. DOE Contract Number(s): AC02-07CH11358; AC05-00OR22725

Nanoparticle Shape Evolution and Proximity Effects During Tip-Induced Electrochemical Processes

Voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When the grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag+/Ag redox reaction to Ag+-ion diffusion with the increase in the applied voltage and pulse duration. This study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities. © 2016 American Chemical Society1441sciescopu

Nanoparticle Shape Evolution and Proximity Effects During Tip-Induced Electrochemical Processes

Voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When the grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag⁺/Ag redox reaction to Ag⁺-ion diffusion with the increase in the applied voltage and pulse duration. This study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities

Cooperative Lithium Sorption in Doped Layered Double Hydroxides Is Modulated by Colloidal (Dis)Assembly

Lithium-aluminum layered double hydroxides (LDHs) selectively sorb lithium from brines, concentrating and purifying this critical element for subsequent conversion to active battery components. Lithium ion partitioning into lattice vacancies within the LDH structure is selectively enhanced with iron doping. However, this process leads to a highly coupled set of intercalation interactions whose mechanisms are challenging to assess in situ. Here, we show that iron modulates the size- and shape-dependent composition of LDHs and imposes a powerful control on lithium sorption processes in complex fluids. We observe fundamental units of LDH layers and aluminum ferrihydrite nanoclusters that (dis)assemble to form at least five distinct particle types that influence LDH lithium capacity and cyclability. Importantly, lithium sorption is controlled by feedbacks arising from the dynamic interconversion of planar stacks and scrolls of LDH layers, which exchange lithium, water, and other species in the process of (un)rolling due to similar energy scales of hydration, sorption, and deformation. Under appropriate iron redox conditions, the cycling efficiency and stability of lithium sorption can be optimized for the range of lithium concentrations found in many natural brines

In situ TEM observation of the electrochemical lithiation of N-doped anatase TiO2 nanotubes as anodes for lithium-ion batteries

The effects of N-doping and the lithiation mechanism of TiO2 nanotubes were elucidated by integrated in situ microscopy and electrochemical measurements