Incidence of spinal deformity in adults and its distribution according SRS-Schwab classification

OBJECTIVE: To evaluate the incidence of spinal deformity in adults, as well as its distribution according the curve type and the occurrence of sagittal modifiers of the SRS-Schwab classification..METHODS: Radiographs in frontal and lateral views of the entire column were performed and radiographic parameters were used to diagnose the vertebral deformity for the classification according to the SRS-Schwab system.RESULTS: We included 302 patients in the study, 236 (78.1%) women and 66 (21.9%) men. Fifty-six of the participants were diagnosed with ASD, 50 women and 6 men. The incidence of ASD was 18.5% in the total population, ranging from 9.1% in males and 21.2% in females (p=0.04). As to age group, the incidence was 11.9% in patients between 18 and 39 years, 12% between 40 and 59 years and 28.8% in patients with 60 years of age or older, significantly higher in the oldest group (p=0.002). When analyzing the correlation between age and progression of sagittal modifiers, there was no significant difference in the PI-LL and PT modifiers, but there was significant difference of SVA modifier (p=0.008), with a higher age in individuals "++".CONCLUSION: This study presented demographic data on ASD in a Brazilian population sample. There was a higher incidence of ASD in females and individuals aged ≥ 60 years. As for the sagittal modifiers of SRS-Schwab classification, there was a correlation between increasing age and degree of progression of SVA.</sec

Influence of endodontic sealer composition and time of fiber post cementation on sealer adhesiveness to bovine root dentin

This study aimed to assess the influence of the type of endodontic sealer (salicylate resinbased sealer vs. two endodontic sealers) and the time of fiber post cementation after root filling on the post adhesion to bovine root dentin. Sixty bovine roots were assigned to six groups (n=10), considering an experimental design with two factors (factorial 3x2): endodontic sealer factor in three levels [epoxy resin-based sealer (AH Plus), eugenol-based sealer (Endofill), and salicylate resin-based sealer plus mineral trioxide aggregate - MTA (MTA Fillapex)] and time for post cementation factor in two levels (immediate post cementation or 15 days after root canal filling). After post cementation, 2-mm-thick slices were produced and submitted to push-out test. The failure modes were analyzed under a 40× stereomicroscope and scored as: adhesive at cement/dentin interface; adhesive at cement/post interface; cement cohesive; post cohesive; dentin cohesive; or mixed. Data were analyzed using two-way ANOVA and Tukey’s post-hoc tests (α=0.05). When the fiber posts were cemented immediately after the root canal filling, the bond strengths were similar, independent of the endodontic sealer type. However, after 15 days, the epoxy resin-based sealer presented higher bond strength than the other sealers (p<0.05). Comparison between each sealer in different experimental times did not reveal any differences. The main failure type was adhesive at dentin/cement interface (89.4%). The time elapsed between the root canal filling and post cementation has no influence on post/root dentin adhesion. On the contrary, the type of endodontic sealer can influence the adhesion between fiber posts and root dentin.Este estudo objetivou avaliar a influência do tipo de cimento endodôntico (um cimento à base de resina de salicilato e dois cimentos endodônticos) e do tempo decorrido entre a obturação do conduto e a cimentação do pino de fibra na adesão de pinos de fibra à dentina radicular bovina. Sessenta dentes bovinos foram divididos em seis grupos (n=10), considerando um desenho experimental de dois fatores (3x2): cimento endodôntico em três níveis [à base de resina epóxica (AH Plus), eugenol (Endofill) e resina de salicilato e MTA (MTA Fillapex)] e o tempo para cimentação em dois níveis (cimentação imediata e 15 dias pós a obturação). Após cimentação do pino de fibra, fatias com 2 mm de espessura foram obtidas e submetidas ao teste de push-out. Os padrões de falha foram analisados em estereomicroscópio (40×) e classificados em: adesiva na interface cimento/dentina, adesiva cimento/pino, coesiva do cimento, coesiva do pino, coesiva da dentina e mista. Os dados foram analisados através dos testes de ANOVA a dois fatores e post hoc de Tukey (a=0,05). Quando os pinos de fibra foram cimentados imediatamente após a obturação dos condutos, a resistência adesiva foi similar, independentemente do tipo de cimento endodôntico. Entretanto, após 15 dias, os dentes obturados com cimento resinoso à base de resina epóxica apresentaram os maiores valores de resistência adesiva (p<0,05). Os valores de resistência adesiva do mesmo cimento nos diferentes tempos experimentais não foram alterados. O principal tipo de falha foi adesiva na interface cimento/ dentina (89,4%). O tempo decorrido entre a obturação dos condutos e a cimentação do pino não influenciou a adesão do pino de fibra à dentina radicular. Por outro lado, o tipo de cimento endodôntico influencia a adesão entre dentina radicular e pinos de fibra

Efeitos do dimetilsulfóxido no estresse oxidativo e na regeneração hepática pós-hepatectomia em ratos

OBJETIVO: avaliar a influência do DMSO sobre o estresse oxidativo e a regeneração hepática pós-HP via um modelo experimental. MÉTODO: 36 ratos Wistar machos jovens foram aleatoriamente distribuídos em dois Grupos de 18 animais: parcialmente hepatectomizados com infusão diária de solução salina (controle) e parcialmente hepatectomizados com aporte diário intraperitoneal de DMSO, todos por duas semanas. Nos tempos 36h (T1), 168h (T2) e 336h (T3) pós-HP, glutationa (GSH) foi medida no plasma e no tecido hepático, enquanto glicose e bilirrubina total foram aquilatados no sangue. A massa do fígado residual, nos mesmos tempos, foi o parâmetro utilizado para estimar a evolução da regeneração do fígado. RESULTADOS: DMSO baixou os níveis de GSH hepático e sangüíneo mas não interferiu na evolução da massa em regeneração. CONCLUSÃO: DMSO inibiu o estresse oxidativo pós-HP mas não mostrou alterações significantes na regeneração hepática em ratos

Influence of endodontic sealer composition and time of fiber post cementation on sealer adhesiveness to bovine root dentin

This study aimed to assess the influence of the type of endodontic sealer (salicylate resinbased sealer vs. two endodontic sealers) and the time of fiber post cementation after root filling on the post adhesion to bovine root dentin. Sixty bovine roots were assigned to six groups (n=10), considering an experimental design with two factors (factorial 3x2): endodontic sealer factor in three levels [epoxy resin-based sealer (AH Plus), eugenol-based sealer (Endofill), and salicylate resin-based sealer plus mineral trioxide aggregate - MTA (MTA Fillapex)] and time for post cementation factor in two levels (immediate post cementation or 15 days after root canal filling). After post cementation, 2-mm-thick slices were produced and submitted to push-out test. The failure modes were analyzed under a 40× stereomicroscope and scored as: adhesive at cement/dentin interface; adhesive at cement/post interface; cement cohesive; post cohesive; dentin cohesive; or mixed. Data were analyzed using two-way ANOVA and Tukey’s post-hoc tests (α=0.05). When the fiber posts were cemented immediately after the root canal filling, the bond strengths were similar, independent of the endodontic sealer type. However, after 15 days, the epoxy resin-based sealer presented higher bond strength than the other sealers (p<0.05). Comparison between each sealer in different experimental times did not reveal any differences. The main failure type was adhesive at dentin/cement interface (89.4%). The time elapsed between the root canal filling and post cementation has no influence on post/root dentin adhesion. On the contrary, the type of endodontic sealer can influence the adhesion between fiber posts and root dentin.Este estudo objetivou avaliar a influência do tipo de cimento endodôntico (um cimento à base de resina de salicilato e dois cimentos endodônticos) e do tempo decorrido entre a obturação do conduto e a cimentação do pino de fibra na adesão de pinos de fibra à dentina radicular bovina. Sessenta dentes bovinos foram divididos em seis grupos (n=10), considerando um desenho experimental de dois fatores (3x2): cimento endodôntico em três níveis [à base de resina epóxica (AH Plus), eugenol (Endofill) e resina de salicilato e MTA (MTA Fillapex)] e o tempo para cimentação em dois níveis (cimentação imediata e 15 dias pós a obturação). Após cimentação do pino de fibra, fatias com 2 mm de espessura foram obtidas e submetidas ao teste de push-out. Os padrões de falha foram analisados em estereomicroscópio (40×) e classificados em: adesiva na interface cimento/dentina, adesiva cimento/pino, coesiva do cimento, coesiva do pino, coesiva da dentina e mista. Os dados foram analisados através dos testes de ANOVA a dois fatores e post hoc de Tukey (a=0,05). Quando os pinos de fibra foram cimentados imediatamente após a obturação dos condutos, a resistência adesiva foi similar, independentemente do tipo de cimento endodôntico. Entretanto, após 15 dias, os dentes obturados com cimento resinoso à base de resina epóxica apresentaram os maiores valores de resistência adesiva (p<0,05). Os valores de resistência adesiva do mesmo cimento nos diferentes tempos experimentais não foram alterados. O principal tipo de falha foi adesiva na interface cimento/ dentina (89,4%). O tempo decorrido entre a obturação dos condutos e a cimentação do pino não influenciou a adesão do pino de fibra à dentina radicular. Por outro lado, o tipo de cimento endodôntico influencia a adesão entre dentina radicular e pinos de fibra

Brazilian Flora 2020: Leveraging the power of a collaborative scientific network

International audienceThe shortage of reliable primary taxonomic data limits the description of biological taxa and the understanding of biodiversity patterns and processes, complicating biogeographical, ecological, and evolutionary studies. This deficit creates a significant taxonomic impediment to biodiversity research and conservation planning. The taxonomic impediment and the biodiversity crisis are widely recognized, highlighting the urgent need for reliable taxonomic data. Over the past decade, numerous countries worldwide have devoted considerable effort to Target 1 of the Global Strategy for Plant Conservation (GSPC), which called for the preparation of a working list of all known plant species by 2010 and an online world Flora by 2020. Brazil is a megadiverse country, home to more of the world's known plant species than any other country. Despite that, Flora Brasiliensis, concluded in 1906, was the last comprehensive treatment of the Brazilian flora. The lack of accurate estimates of the number of species of algae, fungi, and plants occurring in Brazil contributes to the prevailing taxonomic impediment and delays progress towards the GSPC targets. Over the past 12 years, a legion of taxonomists motivated to meet Target 1 of the GSPC, worked together to gather and integrate knowledge on the algal, plant, and fungal diversity of Brazil. Overall, a team of about 980 taxonomists joined efforts in a highly collaborative project that used cybertaxonomy to prepare an updated Flora of Brazil, showing the power of scientific collaboration to reach ambitious goals. This paper presents an overview of the Brazilian Flora 2020 and provides taxonomic and spatial updates on the algae, fungi, and plants found in one of the world's most biodiverse countries. We further identify collection gaps and summarize future goals that extend beyond 2020. Our results show that Brazil is home to 46,975 native species of algae, fungi, and plants, of which 19,669 are endemic to the country. The data compiled to date suggests that the Atlantic Rainforest might be the most diverse Brazilian domain for all plant groups except gymnosperms, which are most diverse in the Amazon. However, scientific knowledge of Brazilian diversity is still unequally distributed, with the Atlantic Rainforest and the Cerrado being the most intensively sampled and studied biomes in the country. In times of “scientific reductionism”, with botanical and mycological sciences suffering pervasive depreciation in recent decades, the first online Flora of Brazil 2020 significantly enhanced the quality and quantity of taxonomic data available for algae, fungi, and plants from Brazil. This project also made all the information freely available online, providing a firm foundation for future research and for the management, conservation, and sustainable use of the Brazilian funga and flora