Concurrent validity and reliability of the load-velocity relationship to predict the one-repetition maximum during three weightlifting derivatives

The study investigated the concurrent validity and reliability of the load-velocity relationship to predict the one-repetition maximum (1RM) of the power clean from the knee (PCK), high pull from the knee (HPK), and mid-thigh clean pull (MTCP). For each exercise, 12 participants performed two 1RM sessions tests and two sessions to measure the barbell’s load-velocity relationship at 30, 45, 60, 75, and 90% of 1RM. The velocity recorded at each load was used to establish the linear regression equation and, consequently, to predict 1RM value. A low validity between the 1RM direct test and predicted 1RM was observed for PCK (typical error [TE]=3.96 to 4.50 kg, coefficient of variation [CV]=4.68 to 5.27%, effect size [ES]=-0.76 to -0.58, Bland-Altman bias [BAB]=9.83 to 11.19 kg), HPK (TE=4.58 to 5.82 kg, CV=6.44 to 8.14%, ES=-0.40 to -0.39, BAB=3.52 to 4.17 kg), and MTCP (TE=6.33 to 8.08 kg, CV=4.78 to 6.16%, ES=-0.29 to -0.19, BAB=3.98 to 6.17 kg). Adequate reliability was observed for the 1RM direct test and for the predicted 1RM. However, based on Bland-Altman limits of agreement, lower measurement errors were obtained for the 1RM direct test in comparison to the predicted 1RM for all the exercises. In conclusion, the load-velocity relationship was not able to predict 1RM values with high accuracy in the PCK, HPK, and MTCP. Moreover, the 1RM direct test was the most reliable for PCK, HPK and MTCP

Genome-wide association between single nucleotide polymorphisms with beef fatty acid profile in Nellore cattle using the single step procedure

Abstract\ud \ud Background\ud Saturated fatty acids can be detrimental to human health and have received considerable attention in recent years. Several studies using taurine breeds showed the existence of genetic variability and thus the possibility of genetic improvement of the fatty acid profile in beef. This study identified the regions of the genome associated with saturated, mono- and polyunsaturated fatty acids, and n-6 to n-3 ratios in the Longissimus thoracis of Nellore finished in feedlot, using the single-step method.\ud \ud \ud Results\ud The results showed that 115 windows explain more than 1 % of the additive genetic variance for the 22 studied fatty acids. Thirty-one genomic regions that explain more than 1 % of the additive genetic variance were observed for total saturated fatty acids, C12:0, C14:0, C16:0 and C18:0. Nineteen genomic regions, distributed in sixteen different chromosomes accounted for more than 1 % of the additive genetic variance for the monounsaturated fatty acids, such as the sum of monounsaturated fatty acids, C14:1 cis-9, C18:1 trans-11, C18:1 cis-9, and C18:1 trans-9. Forty genomic regions explained more than 1 % of the additive variance for the polyunsaturated fatty acids group, which are related to the total polyunsaturated fatty acids, C20:4 n-6, C18:2 cis-9 cis12 n-6, C18:3 n-3, C18:3 n-6, C22:6 n-3 and C20:3 n-6 cis-8 cis-11 cis-14. Twenty-one genomic regions accounted for more than 1 % of the genetic variance for the group of omega-3, omega-6 and the n-6:n-3 ratio.\ud \ud \ud Conclusions\ud The identification of such regions and the respective candidate genes, such as ELOVL5, ESSRG, PCYT1A and genes of the ABC group (ABC5, ABC6 and ABC10), should contribute to form a genetic basis of the fatty acid profile of Nellore (Bos indicus) beef, contributing to better selection of the traits associated with improving human health.MVA Lemos, (FAPESP, Fundação de Amparo à Pesquisa do Estado de São\ud Paulo). HLJ Chiaia, MP Berton, FLB Feitosa received scholarships from the\ud Coordination Office for Advancement of University-level Personnel (CAPES;\ud Coordenação de Aperfeiçoamento de Pessoal de Nível Superior) in conjunction\ud with the Postgraduate Program on Genetics and Animal Breeding, Faculdade\ud de Ciências Agrárias e Veterinárias, Universidade Estadual Paulista (FCAV,\ud UNESP). F Baldi (FAPESP, Fundação de Amparo à Pesquisa do Estado de São\ud Paulo grant #2011/21241-0). Lucia G. Albuquerque (FAPESP, Fundação de\ud Amparo à Pesquisa do Estado de São Paulo grant #2009/16118-5)

Electrochemical and optical properties of CeO2-SnO2 and CeO2-SnO2:X (X = Li, C, Si) films

Thin solid films of CeO2-SnO2 (17 mol% Sn) and CeO2-SnO2:X (X = Li, C and Si) were prepared by the sol-gel route, using an aqueous-based process. The addition of Li, C and Si to the precursor solution leads to films with different electrochemical performances. The films were deposited by the dip-coating technique on ITO coated glass (Donnelly Glass) at a speed of 10 cm/min and submitted to a final thermal treatment at 450 °C during 10 min in air. The electrochemical and optical properties of the films were determined from the cyclic voltammetry and chronoamperometry measurements using 0.1 M LiOH as supporting electrolyte. The ion storage capacity of the films was investigated using in situ spectroelectrochemical method and during the insertion/extraction process the films remained transparent. The powders were characterized by thermal analysis (DSC/TGA) and X-ray diffraction

Influence of the Operating Conditions on the Release of Corrosion Inhibitors from Spray-Dried Carboxymethylcellulose Microspheres

Sodium carboxymethylcellulose (CMC-Na) microparticles, containing corrosion inhibitor benzotriazole (BTA), were prepared using different spray drying processing parameters, with the purpose of future application in protective coatings for the delivery of corrosion inhibitors. The effects of the processing parameters, such as inlet temperature and spray flow rate, are discussed herein. The biopolymeric CMC-Na microparticles obtained were characterized morphologically by SEM and TEM, and their release profile studied by UV-Vis. The results show that the prepared microparticles (microspheres) were homogeneous, spherically shaped and of a matrix-type nature. Additionally, it was observed that the inlet temperature and spray flow rate significantly influenced the release profiles and process yields. From the different process parameters tested, it was found that the best conditions to achieve higher process yields, higher encapsulation efficiencies and better release properties, were an inlet temperature of 170 °C, a pump rate of 2.5 mL/min, and a drying air-flow rate of 440 L/h

Effect of Zr⁴⁺ on Lithium-Ion Conductivity of Garnet-Type Li_5+xLa₃(Nb_2−xZr_x)O₁₂ Solid Electrolytes

Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy

Dimensionamento de sistema de geração fotovoltáica grid-tie e instalação de planta de 3 kWp na usina ecoelétrica

This paper presents the main topics of design and general sizing of photovoltaic generation systems connected to the power grid. A real case study of installing a complete system of 3 kWp on Renewable Energy Laboratory of Unesp Ilha Solteira is displayed. The system is in working more than two months without interruption, generating more than 1 MWh and has served the undergraduate teaching and extension as the electrical engineering week and other general outreach activities of the University.Neste trabalho são apresentados os principais tópicos de projeto e dimensionamento geral de sistemas de geração fotovoltaico conectados a rede de energia. É apresentado um estudo de caso real da instalação de um sistema completo de 3 kWp no Laboratório de Energias Renováveis da Unesp Ilha Solteira. O sistema encontra-se funcionando a mais de tres meses ininterruptamente, gerando mais de 1 MWh e tem servido as atividades de ensino de graduação e extensão como na Semana de Engenharia Elétrica e outras atividades de divulgação geral do Universidade

Influence of drainage status on soil and water chemistry, litter decomposition and soil respiration in central Amazonian forests on sandy soils

Central Amazonian rainforest landscape supports a mosaic of tall terra firme rainforest and ecotone campinarana, riparian and campina forests, reflecting topography-induced variations in soil, nutrient and drainage conditions. Spatial and temporal variations in litter decomposition, soil and groundwater chemistry and soil CO2 respiration were studied in forests on sandy soils, whereas drought sensitivity of poorly-drained valley soils was investigated in an artificial drainage experiment. Slightly changes in litter decomposition or water chemistry were observed as a consequence of artificial drainage. Riparian plots did experience higher litter decomposition rates than campina forest. In response to a permanent lowering of the groundwater level from 0.1 m to 0.3 m depth in the drainage plot, topsoil carbon and nitrogen contents decreased substantially. Soil CO2 respiration decreased from 3.7±0.6 µmol m-2 s-1 before drainage to 2.5±0.2 and 0.8±0.1 µmol m-2 s-1 eight and 11 months after drainage, respectively. Soil respiration in the control plot remained constant at 3.7±0.6 µmol m-2 s-1. The above suggests that more frequent droughts may affect topsoil carbon and nitrogen content and soil respiration rates in the riparian ecosystem, and may induce a transition to less diverse campinarana or short-statured campina forest that covers areas with strongly-leached sandy soil