3 research outputs found
Photo-induced second-order nonlinearity in stoichiometric silicon nitride waveguides
We report the observation of second-harmonic generation in stoichiometric
silicon nitride waveguides grown via low-pressure chemical vapour deposition.
Quasi-rectangular waveguides with a large cross section were used, with a
height of 1 {\mu}m and various different widths, from 0.6 to 1.2 {\mu}m, and
with various lengths from 22 to 74 mm. Using a mode-locked laser delivering
6-ps pulses at 1064 nm wavelength with a repetition rate of 20 MHz, 15% of the
incoming power was coupled through the waveguide, making maximum average powers
of up to 15 mW available in the waveguide. Second-harmonic output was observed
with a delay of minutes to several hours after the initial turn-on of pump
radiation, showing a fast growth rate between 10 to 10 s,
with the shortest delay and highest growth rate at the highest input power.
After this first, initial build-up, the second-harmonic became generated
instantly with each new turn-on of the pump laser power. Phase matching was
found to be present independent of the used waveguide width, although the
latter changes the fundamental and second-harmonic phase velocities. We address
the presence of a second-order nonlinearity and phase matching, involving an
initial, power-dependent build-up, to the coherent photogalvanic effect. The
effect, via the third-order nonlinearity and multiphoton absorption leads to a
spatially patterned charge separation, which generates a spatially periodic,
semi-permanent, DC-field-induced second-order susceptibility with a period that
is appropriate for quasi-phase matching. The maximum measured second-harmonic
conversion efficiency amounts to 0.4% in a waveguide with 0.9 x 1 {\mu}m
cross section and 36 mm length, corresponding to 53 {\mu}W at 532 nm with 13 mW
of IR input coupled into the waveguide. The according amounts to
3.7 pm/V, as retrieved from the measured conversion efficiency.Comment: 20 pages, 10 figure
Building an end user focused THz based ultra high bandwidth wireless access network: The TERAPOD approach
The TERAPOD project aims to investigate and
demonstrate the feasibility of ultra high bandwidth wireless
access networks operating in the Terahertz (THz) band. The
proposed TERAPOD THz communication system will be developed,
driven by end user usage scenario requirements and will
be demonstrated within a first adopter operational setting of a
Data Centre. In this article, we define the full communications
stack approach that will be taken in TERAPOD, highlighting the
specific challenges and aimed innovations that are targeted