Effect of approach run velocity on the optimal performance of the triple jump

Purpose: The purpose of this study was to determine the effect of horizontal and vertical velocities at the landing of the last step of approach run on the performance and optimal phase ratio of the triple jump. Methods: Three-dimensional kinematic data of 13 elite male triple jumpers were obtained during a competition. Computer simulations were performed using a biomechanical model of the triple jump to determine the longest actual distance using the optimal phase ratio with altered horizontal and vertical velocities at the landing of the last step of approach run. Results: The actual distance obtained using the optimal phase ratio significantly increased as the horizontal velocity at the landing of the last step of approach run increased (p = 0.001) and the corresponding downward vertical velocity decreased (p = 0.001). Increasing horizontal velocity at the landing of the last step of approach run decreased optimal hop percentage and increased optimal jump percentage (p = 0.001), while decreasing corresponding downward vertical velocity increased optimal hop percentage and decreased optimal jump percentage (p = 0.001). Conclusion: The effects of the velocities at the landing of the last step of approach run on the optimal phase ratio were generally small and did not qualitatively alter optimal techniques

Biomechanical characteristics of an anterior cruciate ligament injury in javelin throwing

Purpose: The purpose of this study was to understand the mechanism of an anterior cruciate ligament (ACL) injury in javelin throwing and javelin throwing techniques relevant to this ACL injury. Methods: The patient in this study was an elite female javelin thrower who completed the first three trials and sustained a non-contact ACL injury on her left knee in the fourth trial of javelin throwing during a recent track and field meet. Three-dimensional kinematic data were collected in the injury and non-injury trials. The kinematic data of 52 male and 54 female elite javelin throwers were obtained from a javelin throwing biomechanical database. Results: The patient had greater forward center of mass velocity and less vertical center of mass velocity after the first 25% of the delivery phase in the injury trial compared to non-injury trials. The patient had less left knee flexion angle and angular velocity but similar left knee valgus and internal rotation angles during the first 21% of the delivery phase in the injury trial compared to non-injury trials. The video images showed an obvious tibia anterior translation at the 30% of the delivery phase in the injury trial. The left knee flexion angle and angular velocity at the time of the left foot landing and the maximal left knee flexion angle during the delivery phase were not significantly correlated to the official distance for 52 male and 54 female elite javelin throwers. Conclusion: The ACL injury in this study occurred during the first 30% of the delivery phase, most likely during the first 25% of the delivery phase. A stiff landing of the left leg with a small knee flexion angle was the primary contributor to this injury. Javelin throwers may have a soft left leg landing with a flexed knee, which may help them prevent ACL injuries without compromising performance

Phase transition and hysteresis in scale-free network traffic

We model information traffic on scale-free networks by introducing the node queue length L proportional to the node degree and its delivering ability C proportional to L. The simulation gives the overall capacity of the traffic system, which is quantified by a phase transition from free flow to congestion. It is found that the maximal capacity of the system results from the case of the local routing coefficient \phi slightly larger than zero, and we provide an analysis for the optimal value of \phi. In addition, we report for the first time the fundamental diagram of flow against density, in which hysteresis is found, and thus we can classify the traffic flow with four states: free flow, saturated flow, bistable, and jammed.Comment: 5 pages, 4 figure

Method to Eliminate Flux Linkage DC Component in Load Transformer for Static Transfer Switch

Many industrial and commercial sensitive loads are subject to the voltage sags and interruptions. The static transfer switch (STS) based on the thyristors is applied to improve the power quality and reliability. However, the transfer will result in severe inrush current in the load transformer, because of the DC component in the magnetic flux generated in the transfer process. The inrush current which is always 2~30 p.u. can cause the disoperation of relay protective devices and bring potential damage to the transformer. The way to eliminate the DC component is to transfer the related phases when the residual flux linkage of the load transformer and the prospective flux linkage of the alternate source are equal. This paper analyzes how the flux linkage of each winding in the load transformer changes in the transfer process. Based on the residual flux linkage when the preferred source is completely disconnected, the method to calculate the proper time point to close each phase of the alternate source is developed. Simulation and laboratory experiments results are presented to show the effectiveness of the transfer method

Electrocatalysis of Oxygen Reduction on Te-Modified Platinum Stepped Crystal Surfaces

Te-modified platinum single-crystal surfaces in the [011̅] zone have been used as model electrocatalysts for oxygen reduction reaction (ORR). The results clearly show that (1) except for Pt(111), all other electrodes display enhanced ORR activity when Te is deposited on the surface; (2) the intrinsic ORR activity for Pt(hkl) decreases in the order of Pt(322) > Pt(755) > Pt(977) > Pt(111) > Pt(311) > Pt(100), while the enhancement factor for ORR with Te modification decreases in the order of Pt(100) > Pt(311) > Pt(977) > Pt(755) > Pt(322); (3) metallic Te and its charge transfer to Pt as well as the consequent lower d-band center and OHad binding energy are probably the reasons for the enhanced electrocatalysis for ORR with Te modification; and (4) the inhibition of Te at Pt(111) as well as the smaller extent for the enhancement of Te at Pt(S)-[n(111) × (100)] with longer terraces in the kinetic region for ORR are a result of partial oxidation of Te. The weaker electronic interaction of Te with the Pt substrate is probably the origin of its facile oxidation at lower potential. Our results imply that modification of Pt with species that can transfer electrons to Pt may be an efficient strategy to enhance the ORR activity.This work was supported by the National Natural Science Foundation of China (No. 22172151, 21972131, and 21832004). E.H. gratefully acknowledged the International Professorship by USTC and financial support from the Ministerio de Ciencia e Innovación (project PID2022–137350NB-I00)

Effects of different starch sources on Bacillus spp. in intestinal tract and expression of intestinal development related genes of weanling piglets

The study was conducted to evaluate the effects of different starch sources on Bacillus spp. in intestinal tract and expression of intestinal development related genes of weanling piglets. Twenty-eight PIC male piglets were divided into four homogeneous groups according to initial body weight (similar birth and parity, weaned at 21 ± 1.5 days). Diets for the four treatments consisted of corn starch, wheat starch, tapioca starch and pea starch with the determined ratio for amylose to amylopectin of 0.21, 0.24, 0.12 and 0.52 respectively. Real-time quantitative polymerase chain reaction was applied to: (1) detect genomic DNA of Bacillus and to quantify the number of Bacillus in the intestinal tract chyme of piglets with the primers and probe which designed based on the 16S rRNA sequences of maximum species of Bacillus on GenBank; (2) measure the mRNA level of glucagon-like peptide 2 (GLP-2), insulin-like growth factors 1 (IGF-1) and epidermal growth factor (EGF) in duodenum, jejunum and ileum. Results showed that the number of Baciilus and the percentage based on all bacteria in the whole intestinal content of piglets fed pea starch was highest in all groups (P < 0.05). There was no significant differance on copy numbers for all bacteria and Bacillus in the whole intestinal tract of piglets between the corn starch group and wheat starch group (P > 0.05). In addition, the expression level of GLP-2, IGF-1 mRNA in jejunum and ileum of pea starch treatment (the high amylose/amylopectin ratio) were increased while the tapioca starch decreased their mRNA level significantly compared to other three treatments (P < 0.05). There was no significant difference for the mRNA level of EGF in each group. The present study revealed that high amylose/amylopectin ratio of starches significantly enhanced the numbers of Bacillus in all segments of intestine and the mRNA level of intestinal development related genes

Prophylactic administration of parenteral steroids for preventing airway complications after extubation in adults: meta-analysis of randomised placebo controlled trials

Objective To determine whether steroids are effective in preventing laryngeal oedema after extubation and reducing the need for subsequent reintubation in critically ill adults

Rare earth ion-doped Y2.95R0.05MgAl3SiO12 (R = Yb, Y, Dy, Eu, Sm) garnet-type microwave ceramics for 5G application

In this work, Y2.95R0.05MgAl3SiO12 (R=Yb, Y, Dy, Eu, Sm) microwave single-phase dielectric ce-ramics were successfully prepared via conventional ceramic technology by doping a series of rare earth elements with different ionic radius (Yb, Y, Dy, Eu, Sm) for the first time. The effects of A site occupied by rare earth elements on the microwave dielectric properties of Y2.95R0.05MgAl3SiO12 were studied by crystal structure refinement, scanning electron microscope (SEM), bond valence theory, P-V-L theory and infrared reflection spectroscopy. It was found that the ionicity of Y-O bond, the lattice energy, the bond energy and bond valance of Al(Tet)-O bond had important effects on microwave dielectric properties. Particularly, the optimum microwave dielectric properties were obtained for Y2.95Dy0.05MgAl3SiO12 sintered at 1575 °C for 6 h, with εr = 9.68, Q×f = 68,866 GHz, and τf = -35.8 ppm/°C, displaying its potential prospect in the 5G communication