153 research outputs found
Effect of the CB1 cannabinoid agonist WIN 55212-2 on the acquisition and reinstatement of MDMA-induced conditioned place preference in mice
<p>Abstract</p> <p>Background</p> <p>Numerous reports indicate that MDMA users consume other psychoactive drugs, among which cannabis is one of the most common. The aim of the present study was to evaluate, using the conditioned place preference, the effect of the cannabinoid agonist WIN 55,212-2 on the rewarding effects of MDMA in mice.</p> <p>Methods</p> <p>In the first experiment adolescent mice were initially conditioned with 1.25, 2.5 or 5 mg/kg of MDMA or 0.1 or 0.5 mg/kg of WIN and subsequently with both drugs. Reinstatement of the extinguished preference by priming doses was performed in the groups that showed CPP. In the second experiment, animals were conditioned with 2.5 or 5 mg/kg of MDMA and, after extinction, reinstatement of the preference was induced by 0.5 or 0.1 mg/kg of WIN.</p> <p>Results</p> <p>A low dose of WIN 55212-2 (0.1 mg/kg) increased the rewarding effects of low doses of MDMA (1.25 mg/kg), although a decrease in the preference induced by MDMA (5 and 2.5 mg/kg) was observed when the dose of WIN 55212-2 was raised (0.5 mg/kg). The CB1 antagonist SR 141716 also increased the rewarding effects of the lowest MDMA dose and did not block the effects of WIN. Animals treated with the highest WIN dose plus a non-neurotoxic dose of MDMA exhibited decreases of striatal DA and serotonin in the cortex. On the other hand, WIN 55212-2-induced CPP was reinstated by priming injections of MDMA, although WIN did not reinstate the MDMA-induced CPP.</p> <p>Conclusions</p> <p>These results confirm that the cannabinoid system plays a role in the rewarding effects of MDMA and highlights the risks that sporadic drug use can pose in terms of relapse to dependence. Finally, the potential neuroprotective action of cannabinoids is not supported by our data; on the contrary, they are evidence of the potential neurotoxic effect of said drugs when administered with MDMA.</p
The genomic structure of the highlyconserved dmrt1 gene in Solea senegalensis (Kaup, 1868) shows an unexpected intragenic duplication
Knowing the factors responsible for sex determination in a species has significant theoretical and practical implications; the dmrt1 gene (Doublesex and Mab-3 (DM)-related Transcription factor 1) plays this role in diverse animal species. Solea senegalensis is a commercially important flat fish in which females grow 30% faster than males. It has 2n = 42 chromosomes and an XX / XY chromosome system for sex determination, without heteromorph chromosomes but with sex proto-chromosome. In the present study, we are providing the genomic structure and nucleotide sequence of dmrt1 gene obtained from cDNA from male and female adult gonads. A cDNA of 2027 containing an open-reading frame (ORF) of 1206 bp and encoding a 402 aa protein it is described for dmrt1 gene of S. senegalensis. Multiple mRNA isoforms indicating a high variable system of alternative splicing in the expression of dmrt1 of the sole in gonads were studied. None isoforms could be related to sex of individuals. The genomic structure of the dmrt1 of S. senegalensis showed a gene of 31400 bp composed of 7 exons and 6 introns. It contains an unexpected duplication of more than 10399 bp, involving part of the exon I, exons II and III and a SINE element found in the sequence that it is proposed as responsible for the duplication. A mature miRNA of 21 bp in length was localized at 336 bp from exon V. Protein-protein interacting networks of the dmrt1 gene showed matches with dmrt1 protein from Cynoglossus semilaevis and a protein interaction network with 11 nodes (dmrt1 plus 10 other proteins). The phylogenetic relationship of the dmrt1 gene in S. senegalensis is consistent with the evolutionary position of its species. The molecular characterization of this gene will enhance its functional analysis and the understanding of sex differentiation in Solea senegalensis and other flatfish
Sulfadiazine, sulfamethazine and sulfachloropyridazine removal using three different porous materials: Pine bark, “oak ash” and mussel shell
This work focuses on studying the efficacy of three different by-products to adsorb three antibiotics (sulfadiazine, SDZ; sulfamethazine, SMT; sulfachloropyridazine, SCP). These antibiotics can be considered pollutants of the environment when they reach water, as well as in cases where they are spread on soils through irrigation or contained in sewage sludge or livestock manure. In this study, batch-type adsorption/desorption experiments were performed for each of the three sulfonamides, adding 7 different concentrations of the antibiotics, going from 1 to 50 μmol L−1, and with contact time of 24 h. The results indicate that pine bark is the most efficient bioadsorbent among those studied, as it adsorbs up to 95% of the antibiotics added, while desorption is always less than 11%. However, for “oak ash” and mussel shell the adsorption is always lower than 45 and 15%, respectively, and desorption is high, reaching up to 49% from “oak ash” and up to 81% from mussel shell. Adsorption data showed good fitting to the Linear and Freundlich models, with R2 values between 0.98 and 1.00 in both cases. Kd and KF adsorption parameters showed similar values for the same sorbent materials but were much higher for pine bark than for the other two bioadsorbents. The Freundlich's n parameter showed values in the range 0.81–1.28. The highest KF values (and therefore the highest adsorption capacities) were obtained for the antibiotic SCP in pine bark. Pine bark showed the highest capacity to adsorb each of the antibiotics, increasing as a function of the concentration added. When the concentration of sulfonamide added was 50 μM, the amounts adsorbed were 780 μmol kg−1 for SDZ, 890 μmol kg−1 for SMT, and 870 μmol kg−1 for SCP. “Oak ash” and mussel shell have low adsorption capacity for all three sulfonamides, showing values always lower than 150 μmol kg−1 (oak ash) and 20 μmol kg−1 (mussel shell) when a concentration of 50 μmol L−1 of antibiotic is added. The results of this study could aid to make an appropriate management of the by-products studied, in order to facilitate their valorization and recycling in the treatment of environmental compartments polluted with sulfonamide antibiotics.Agencia Estatal de Investigación | Ref. RTI2018-099574-B-C21Agencia Estatal de Investigación | Ref. RTI2018-099574-B-C2
Parabolic reflectarray antenna to generate multiple beams for geostationary high throughput satellites in Ka-band
This contribution describes the design and simulations of a multibeam 1.8 m parabolic reflectarray antenna for geostationary high throughput satellites (HTS) in Ka-band. The parabolic reflectarray generates two orthogonal circularly polarized beams per feed simultaneously at 19.7 and 29.5 GHz, by the variable rotation technique. The antenna is made of 62 654 reflectarray cells, which include two types of printed elements independently rotated and adjusted. The elements have been optimized one by one to ensure the required phase-shift at each frequency. A novel design approach has made it possible to promptly obtain an initial layout of every element with a very low computational cost. The simulated radiation patterns show that the parabolic reflectarray, illuminated by 27 dual-circularly polarized feeds, can generate 54 spot-beams in two orthogonal polarizations, with a beam spacing of 0.56° between adjacent beams. The design and simulation tools have been validated by a parabolic reflectarray scaled in a factor of 0.5, which has been manufactured and tested. The proposed reflectarray would allow to generate a complete multi-spot coverage from a geostationary HTS with only two parabolic reflectarrays, instead of four reflector antennas, also reducing the number of feeds by half, since every feed generates two beams.Agencia Estatal de Investigación | Ref. PID2020-113979RB-C22Agencia Estatal de Investigación | Ref. PID2020-114172RB-C21-2Agencia Estatal de Investigación | Ref. PDC2021-120959-C2
Analysis of the oscillations induced by a supersonic jet applied to produce nanofibers
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUGHigh-performance fibers are key components for enhancing the mechanical properties of composite materials. The development of high strength nanofibers augurs the production of new nano-composites with outstanding features. However, the robust production of continuous glass nanofibers that can be feasible processed for efficiently manufacturing nanocomposites is still challenging. Recently, Cofiblas (Continuous Fiberizing by Laser melting and Supersonic dragging) was demonstrated as a technique capable of producing continuous glass nanofibers with unlimited length. Cofiblas process has some similarities with the widely known melt blowing technique for the production of polymeric fibers. In both techniques, the design of the gas nozzle is key to ensure the feasibility of the process since the turbulences of the gas jet may induce strong whipping of the filament. This paper gives novel experimental evidences on the correlation of the supersonic gas jet instabilities with the oscillation of the filament in the melt-blowing and Cofiblas processes, relating these oscillations with the presence of shock waves and unsteadiness in the flow, and gives valuable insight into the use of supersonic jets in the melt blowing process as an effective approach for the formation of nanofibers. A thin 3D-axisymmetric model in OpenFOAM® was put to test by comparing the performance of different solvers which were validated by flow visualization of the exit jet using digital holography (DH). In order to perform a realistic and thorough validation, we simulated the optical measurements of the flow from the CFD simulations of the mass density by Abel transform and numerical differentiation. The application of digital holography as the flow visualization technique makes possible both a precise validation of the density maps obtained from the Abel transformation of the 2D-alike results, and the analysis of the shockwave pattern in the air jet. Conversely, the numerical reconstruction of time-averaged holograms is employed to detect unsteadiness in the flow and to analyze the fiber oscillation, which is essential to assess the stability of the process. Lastly, the analysis and comparison of the vibration of the filament using the basic design and the optimized nozzle demonstrates a clear influence of the shock waves and flow unsteadiness in the stability of the filament.Agencia Estatal de Investigación | Ref. PGC2018-094900-B-I00Xunta de Galicia | Ref. ED431C 2019/23Ministerio de Universidades | Ref. FPU20/0311
BNCT research activities at the Granada group and the project NeMeSis: Neutrons for medicine and sciences, towards an accelerator-based facility for new BNCT therapies, medical isotope production and other scientific neutron applications
The Granada group in BNCT research is currently performing studies on: nuclear and radiobiological data for BNCT, new boron compounds and a new design for a neutron source for BNCT and other applications, including the production of medical radioisotopes. All these activities are described in this report.Asociación Española Contra el Cáncer (AECC)
PS16163811PORRSpanish MINECO
FIS2015-69941-C2-1-PJunta de Andalucía P11-FQM-8229Campus of International Excellence BioTic
P-BS-64Spanish Fundacion ACSAsociación Capitán AntonioLa Kuadrilla de IznallozSonriendo se Puede Gana
Extracellular cysteine disulfide bond break at Cys122 disrupts PIP2-dependent Kir2.1 channel function and leads to arrhythmias in Andersen-Tawil Syndrome
S
Material biocompatible
Material biocompatible. El objeto de la presente invención es un nuevo material biocompatible destinado a ser usado en la fabricación de implantes, prótesis o dispositivos biomédicos, y que se fabrica utilizando como material de soporte cerámicas biomórficas de SiC con un recubrimiento de vidrio bioactivo depositado por ablación con láser pulsado.Españ
Changes in humoral immune response after SARS-CoV-2 infection in liver transplant recipients compared to immunocompetent patients
The protective capacity and duration of humoral immunity after SARS-CoV-2 infection are not yet understood in solid organ transplant recipients. A prospective multicenter study was performed to evaluate the persistence of anti-nucleocapsid IgG antibodies in liver transplant recipients 6 months after coronavirus disease 2019 (COVID-19) resolution. A total of 71 liver transplant recipients were matched with 71 immunocompetent controls by a propensity score including variables with a well-known prognostic impact in COVID-19. Paired case-control serological data were also available in 62 liver transplant patients and 62 controls at month 3 after COVID-19. Liver transplant recipients showed a lower incidence of anti-nucleocapsid IgG antibodies at 3 months (77.4% vs. 100%, p <.001) and at 6 months (63.4% vs. 90.1%, p <.001). Lower levels of antibodies were also observed in liver transplant patients at 3 (p =.001) and 6 months (p <.001) after COVID-19. In transplant patients, female gender (OR = 13.49, 95% CI: 2.17-83.8), a longer interval since transplantation (OR = 1.19, 95% CI: 1.03-1.36), and therapy with renin-angiotensin-aldosterone system inhibitors (OR = 7.11, 95% CI: 1.47-34.50) were independently associated with persistence of antibodies beyond 6 months after COVID-19. Therefore, as compared with immunocompetent patients, liver transplant recipients show a lower prevalence of anti-SARS-CoV-2 antibodies and more pronounced antibody levels decline
The polygenic basis of relapse after a first episode of schizophrenia
Little is known about genetic predisposition to relapse. Previous studies have linked cognitive and psychopathological (mainly schizophrenia and bipolar disorder) polygenic risk scores (PRS) with clinical manifestations of the disease. This study aims to explore the potential role of PRS from major mental disorders and cognition on schizophrenia relapse. 114 patients recruited in the 2EPs Project were included (56 patients who had not experienced relapse after 3 years of enrollment and 58 patients who relapsed during the 3-year follow-up). PRS for schizophrenia (PRS-SZ), bipolar disorder (PRS-BD), education attainment (PRS-EA) and cognitive performance (PRS-CP) were used to assess the genetic risk of schizophrenia relapse.Patients with higher PRS-EA, showed both a lower risk (OR=0.29, 95% CI [0.11–0.73]) and a later onset of relapse (30.96± 1.74 vs. 23.12± 1.14 months, p=0.007. Our study provides evidence that the genetic burden of neurocognitive function is a potentially predictors of relapse that could be incorporated into future risk prediction models. Moreover, appropriate treatments for cognitive symptoms appear to be important for improving the long-term clinical outcome of relapse
- …