7,305 research outputs found
Design of Cryogenic SiGe Low-Noise Amplifiers
This paper describes a method for designing cryogenic silicon-germanium (SiGe) transistor low-noise amplifiers and reports record microwave noise temperature, i.e., 2 K, measured at the module connector interface with a 50-Ω generator. A theory for the relevant noise sources in the transistor is derived from first principles to give the minimum possible noise temperature and optimum generator impedance in terms of dc measured current gain and transconductance. These measured dc quantities are then reported for an IBM SiGe BiCMOS-8HP transistor at temperatures from 295 to 15 K. The measured and modeled noise and gain for both a single- and two-transistor cascode amplifier in the 0.2-3-GHz range are then presented. The noise model is then combined with the transistor equivalent-circuit elements in a circuit simulator and the noise in the frequency range up to 20 GHz is compared with that of a typical InP HEMT
Approximations from Anywhere and General Rough Sets
Not all approximations arise from information systems. The problem of fitting
approximations, subjected to some rules (and related data), to information
systems in a rough scheme of things is known as the \emph{inverse problem}. The
inverse problem is more general than the duality (or abstract representation)
problems and was introduced by the present author in her earlier papers. From
the practical perspective, a few (as opposed to one) theoretical frameworks may
be suitable for formulating the problem itself. \emph{Granular operator spaces}
have been recently introduced and investigated by the present author in her
recent work in the context of antichain based and dialectical semantics for
general rough sets. The nature of the inverse problem is examined from
number-theoretic and combinatorial perspectives in a higher order variant of
granular operator spaces and some necessary conditions are proved. The results
and the novel approach would be useful in a number of unsupervised and semi
supervised learning contexts and algorithms.Comment: 20 Pages. Scheduled to appear in IJCRS'2017 LNCS Proceedings,
Springe
High speed turboprop aeroacoustic study (counterrotation). Volume 1: Model development
The isolated counterrotating high speed turboprop noise prediction program was compared with model data taken in the GE Aircraft Engines Cell 41 anechoic facility, the Boeing Transonic Wind Tunnel, and in NASA-Lewis' 8x6 and 9x15 wind tunnels. The predictions show good agreement with measured data under both low and high speed simulated flight conditions. The installation effect model developed for single rotation, high speed turboprops was extended to include counterotation. The additional effect of mounting a pylon upstream of the forward rotor was included in the flow field modeling. A nontraditional mechanism concerning the acoustic radiation from a propeller at angle of attach was investigated. Predictions made using this approach show results that are in much closer agreement with measurement over a range of operating conditions than those obtained via traditional fluctuating force methods. The isolated rotors and installation effects models were combines into a single prediction program, results of which were compared with data taken during the flight test of the B727/UDF engine demonstrator aircraft. Satisfactory comparisons between prediction and measured data for the demonstrator airplane, together with the identification of a nontraditional radiation mechanism for propellers at angle of attack are achieved
Effective Quantum Dynamics of Interacting Systems with Inhomogeneous Coupling
We study the quantum dynamics of a single mode/particle interacting
inhomogeneously with a large number of particles and introduce an effective
approach to find the accessible Hilbert space where the dynamics takes place.
Two relevant examples are given: the inhomogeneous Tavis-Cummings model (e.g.,
N atomic qubits coupled to a single cavity mode, or to a motional mode in
trapped ions) and the inhomogeneous coupling of an electron spin to N nuclear
spins in a quantum dot.Comment: 9 pages and 10 figures, new version, accepted in Physical Review
High speed turboprop aeroacoustic study (single rotation). Volume 1: Model development
A frequency-domain noncompact-source theory for the steady loading and volume-displacement (thickness) noise of high speed propellers has been developed and programmed. Both near field and far field effects have been considered. The code utilizes blade surface pressure distributions obtained from three-dimensional nonlinear aerodynamic flow field analysis programs as input for evaluating the steady loading noise. Simplified mathematical models of the velocity fields induced at the propeller disk by nearby wing and fuselage surfaces and by angle-of-attack operation have been developed to provide estimates of the unsteady loading imposed on the propeller by these potential field type interactions. These unsteady blade loadings have been coupled to a chordwise compact propeller unsteady loading noise model to provide predictions of unsteady loading noise caused by these installation effects. Finally, an analysis to estimate the corrections to be applied to the free-field noise predictions in order to arrive at the measurable fuselage sound pressure levels has been formulated and programmed. This analysis considers the effects of fuselage surface reflection and diffraction together with surface boundary layer refraction. The steady loading and thickness model and the unsteady loading model have been verified using NASA-supplied data for the SR-2 and SR-3 model propfans. In addition, the steady loading and thickness model has been compared with data from the SR-6 model propfan. These theoretical models have been employed in the evaluation of the SR-7 powered Gulfstream aircraft in terms of noise characteristics at representative takeoff, cruise, and approach operating conditions. In all cases, agreement between theory and experiment is encouraging
Nucleation and growth studies of crystalline carbon phases at nanoscale.
Understanding the nucleation and early stage growth of crystals from the vapor phase is important for realizing large-area single-crystal quality films, controlled synthesis of nanocrystals, and the possible discovery of new phases of materials. Carbon provides the most interesting system because all its known crystalline phases (diamond, graphite and carbon nanotubes) are technologically important materials. Hence, this dissertation is focused on studying the nucleation and growth of carbon phases synthesized from the vapor phase. Nucleation experiments were performed in a microwave plasma chemical vapor deposition (CVD) reactor, and the resulting carbon nanocrystals were analyzed primarily using electron nanodiffraction and Raman spectroscopy. These studies led to the discovery of two new crystalline phases of sp3 carbon other than diamond: face-centered and body-centered cubic carbon. Nanodiffraction results revealed possible hydrogen substitution into diamond-cubic lattices, indicating that these new phases probably act as intermediates in diamond nucleation. Nucleation experiments also led to the discovery of two new morphologies for sp2 carbon: nanocrystals of graphite and tapered, hollow 1-D structures termed here as carbon nanopipettes. A Kinetic Monte Carlo (KMC) algorithm was developed to simulate the growth of individual diamond crystals from the vapor phase, starting with small clusters of carbon atoms (or seeds). Specifically, KMC simulations were used to distinguish the kinetic rules that give rise to a star-shaped decahedral morphology compared to decahedral crystals. KMC simulations revealed that slow adsorption on the {111} step-propagation sites compared to kink sites leads to star-decahedral crystals, and higher adsorption leads to decahedral crystals. Since the surfaces of the nanocrystals of graphite and nanopipettes were expected to be composed primarily of edge-plane sites, the electrochemical behavior of both these materials were investigated with compounds requiring chemisorption, specifically biologically important species. Both these materials exhibited a stable and reversible voltammetric behavior for dopamine (a neurotransmitter) similar to that of graphite edge planes. Furthermore, a simple bottom-up concept utilizing the tapered morphology of the nanopipettes was developed to assemble a nanoarray sensor for fast cyclic voltammetry. In summary, the main outcomes of this dissertation include: the discovery of new crystalline carbon phases, understanding kinetic faceting of multiply twinned diamond crystals and tapered morphologies of carbon nanotubes, and development of new electrode materials based on sp2 carbon nanocrystals for sensing biologically important analytes
Multiple Scattering and Attenuation Phenomena in Diffraction Imaging
The problem of cross sectional (tomographic) imaging bf objects with diffracting sources is addressed. Specifically the area of investigation is the effect of multiple scattering and attenuation phenomena in diffraction imaging. The validity of either the Born or the Rytov approximations is the basic assumption behind all the inverse scattering techniques in diffraction tomography. To test these techniques When these assumptions are not satisfied, we have developed a computational procedure for the calculation of the “ true” scattered fields from a multi-component object. Using this procedure, the performance of two available diffraction reconstruction techniques is examined in the presence of multiple scattering effects. The simulation results show the superiority of the Synthetic Aperture technique. We have also studied the role of attenuation in the reconstruction techniques. To calculate the scattered fields from an object in the presence of attenuation, new computer simulation programs are developed. These codes are used in a simulation study of the effect of the attenuation parameter on the object reconstuctions. [reconstruction
- …