PENGARUH TIPE SALURAN PENGECORAN TERHADAP SIFAT MEKANIK DAN STRUKTUR MIKRO ALUMINIUM AL 6061 DENGAN METODE SAND CASTING

Industrial technology is developing very rapidly, one of which is in the field of metal casting. In the foundry case, aluminum is one of the most used types. It happen because of aluminum has many advantages than other types of metal, likely: good corrosion resistance, relatively high mechanical properties, and good formability. The purpose of this study was to determine the effect of variations in the duct system on the tensile strength and impact strength of Al 6061 aluminum using the sand casting method. A variation of this line system was to use a direct line, split line, and split line with an adder. From the results of the study, it was found that the ultimate tensile strength occurred in the specimens using a split channel pattern with an adder, which was 120.25 MPa, while the lowest tensile strength occurred in the specimens using a direct channel pattern which was 65,49 MPa. This also occurs for the highest impact value in the variation of the split pattern system with addition of 0.0081 J/mm2 and the lowest impact value is using the direct channel pattern which results in an impact value of 0.005508 J/mm

PENGARUH TEMPERATUR PEMANASAN DAN WAKTU HOLDING SERAT DAUN NANAS TERHADAP KEKUATAN IMPACT KOMPOSIT EPOXY DENGAN METODE VACUUM INFUSION

Technological developments, especially in the material sector, have led to new discoveries, one of which is the composite type material. Composites have been widely used in the automotive industry, both for exterior and interior. This is what encourages research on composites to continue to be developed. This study aims to determine the effect of heating temperature and heating time on pineapple leaf fibers on the impact strength using the vacuum infusion method. The temperature variations given are 70 °C, 80 °C, and 90 °C. While the variation of drying time is 1 hour, 2 hours, and 3 hours. Composite material manufacturing refers to ASTM D5942-96 standard. The results of this study indicate that the highest impact value occurs in specimens with a heating temperature variation of 80 ° C with a heating time of 3 hours, which is 0.075 Joules / mm². While the lowest impact strength occurs in specimens with a heating temperature of 70 ° C with a heating time of 2 hours, which is 0.01943 Joules / mm²

PEMBUATAN MESIN PEMOTONG DAN PENIRIS TEMPE UNTUK MENINGKATKAN PRODUKSI DI PONDOK DARUL MUTTAQIN

Permasalahan di negara berkembang banyak berkaitan dengan permasalahan ekonomi. Hal ini juga dirasakan oleh bangsa kita yang mana salah satu penyebabnya adalah minimnya bekal pendidikan dan ketrampilan yang dimiliki oleh generasi muda, sehingga dapat menyebabkan tingginya tingkat pengangguran dan pekerjaan yang tidak sesuai dengan keahlian yang dimiliki. Tujuan dari diadakannya kegiatan pengabdian ini adalah untuk meningkatkan kemampuan dan ketrampilan yang dimiliki oleh santri di Pondok Wirausaha Darul Muttaqin Batu. Metode yang dilakukan pada program pengabdian ini adalah dengan memberikan alat pemotong dan peniris tempe kepada mitra agar dapat meningkatkan kemampuan produksinya. Hasil yang didapat dari kegiatan ini menunjukkan bahwa kemampuan dan ketrampilan santri untuk memproduksi tempe menjadi meningkat dan waktu yang diperlukan dalam proses pembuatan produk kripik tempe  menjadi lebih singkat. Tingkat produksi pembuatan keripik tempe yang semula hanya kurang lebih 2 kg, dengan diadakan kegiatan ini bisa mencapai lebih dari 10 kg

PENGARUH PRESENTASE ALKALISASI NaOH TERHADAP KEKUATAN TARIK MATERIAL KOMPOSIT SERAT DAUN NANAS POLYESTER DENGAN METODE VACUUM INFUSION

Pineapple leaf fiber is currently widely used in furniture and handicraft industries (UKM) because besides being easily available, inexpensive, does not endanger health, can reduce environmental pollution so that later on as a composite reinforcing fiber can overcome environmental problems. From the considerations above, this study aims to determine the effect of the alkalization treatment (NaOH) on the tensile strength test of pineapple leaf fibers by vacuum infusion method and to determine the type of fracture of pineapple leaf fiber composites after tensile testing. Before it is made into a composite of pineapple leaves, it is soaked for 2 hours. Manufacture of composite materials based on ASTM D683-03 standard. From the composite tensile test results obtained the highest average tensile strength in specimens treated with NaOH 6% which is 112 MPa. While the lowest at 0% NaOH treatment is 68 MPa. Composites treated with NaOH have higher agility than those not treated with NaOH. The highest agility is found in composites with the highest NaOH treatment

The effect of variations in thickness of 2024 T42 aluminum plate on tensile strength and macrography in the process of resistance spot welding

Resistance Spot Welding merupakan metode pengelasan yang kompleks, yang melibatkan intraksi listrik, termal, mekanik, dan metalurgi. Dimana dalam prosesnya terdapat tiga parameter umum yang mempengaruhi Resistance Spot Welding arus listrik (welding current), tekanan elektroda (electrode force), dan siklus pengelasan. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh variasi ketebalan pada proses Resistance Spot Welding terhadap sifat fisis pada material Alumunium 2024 T42 dengan variasi ketebalan 0.5 + 1.2 + 0.6 mm, 0.8 + 0.6 + 1.0 mm, dan 0.8 + 1.2 + 1.2. Pengujian yang dilakukan yaitu uji tarik (tensile-shear test), dan uji macrography. Hasil pengujian dari setiap variasi ketebalan memenuhi standart AWS D17.2 dengan nilai lebih dari 140 lbf

The Influence of Heat Recirculation Segment of Meso-Scale Combustor o Gas and Liquid Fuel Inside Microscale Combustor

This study aims to determine the effect of heat recirculation segments configuration on the stability of the flame. Mesoscale combustor used is made from duralumin-quart glass tube, and Ø 3.5 mm diameter combustion chamber. The heat recirculation segments part is made of duralumin as a segment of evaporation and air-fuel mixing. Combustor A has heat recirculation segments length of 7 mm, while combustor B has a heat recirculation segments length of 10 mm. The fuel used is liquid hexane and butane gas fuel. The results showed, the stability of hexane flame in combustor A between the equivalent ratio of ɸ 0.73-1.28 temperature can reach 803.8oC. Combustor B is stable at an equivalent ratio of ɸ 0.76-0.98 to a temperature of 580.9oC. Furthermore, for butane flames; combustor A, stable in the range of ɸ 0.68-1.31 temperature to 931.3oC. Combustor B has a stability range of ɸ 0.79-1.41 temperature reaches 857.2oC. Combustor A with a 7 mm heat recirculation segments length is proven to produce wider flame stability, using both liquid fuel and gas. So, combustor A can be recommended to be applied to micro power generators. It should be noted that butane flames appear to have more flame stability than hexane flames. This is because gaseous fuels are more homogeneous (gaseous) so they are more quickly mixed with air

Peta Rencana Denah PLTMH Umbulan Desa Pamotan Kecamatan Dampit Kabupaten Malang

Peta ini dibuat menggunakan aplikasi AutoCAD dimana sebelumnya dilakukan analisis perhitungan detil yang didasarkan pada survey lapangan secara langsung dan juga data-data sekunder yang dibutuhkan dalam menunjang perhitungan dan analisa. Dari peta ini didapatkan sejumlah informasi terkait letak rencana desain PLTMH di Desa Pamotan Dampit dari tim penyusun. Peta ini merupakan salah satu bagian dari luaran hasil (Feasibility Study) perencanaan dan desain awal Pembangkit Listrik Tenaga Air dengan skala kecil (mikro), yang digunakan pada lokasi Sumber Umbulan Desa Pamotan Kecamatan Dampit Kabupaten Malang