Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates

Surface-enhanced Raman spectroscopy (SERS) is a very promising analytical technique for the detection and identification of trace amounts of analytes. Among the many substrates used in SERS of great interest are nanostructures fabricated using physical methods, such as semicontinuous metal films obtained via electron beam physical vapor deposition. In these studies, we investigate the influence of morphology of semicontinuous silver films on their SERS properties. The morphologies studied ranged from isolated particles through percolated films to almost continuous films. We found that films below the percolation threshold (transition from dielectric-like to metal-like) made of isolated silver structures provided the largest SERS enhancement of 4-aminothiophenol (4-ATP) analyte signals. The substrate closest to the percolation threshold has the SERS signal about four times lower than the highest signal sample

Synthesis and characterization of noble metal–titania core–shell nanostructures with tunable shell thickness

Core–shell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A sol–gel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO2 and Au@TiO2 with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UV–vis spectroscopy. Ag@TiO2 and Au@TiO2 structures with shell thickness in the range of ≈40–70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UV–vis range. The TRPS technique was shown to be a very useful tool for the characterization of metal–metal oxide core–shell nanostructures

Fabrication of silver nanoisland films by pulsed laser deposition for surface-enhanced Raman spectroscopy

The results of studies on the fabrication and characterization of silver nanoisland films (SNIFs) using pulsed laser deposition (PLD) and the evaluation of these films as potential surface-enhanced Raman scattering (SERS) substrates are reported. The SNIFs with thicknesses in a range of 4.7 ± 0.2 nm to 143.2 ± 0.2 nm were deposited under different conditions on silicon substrates. Size and morphology of the fabricated silver nanoislands mainly depend on the substrate temperature, and number and energy of the laser pulses. SERS properties of the fabricated films were evaluated by measuring SERS spectra of para-mercaptoaniline (pMA) molecules adsorbed on them. SERS enhancement factors are shown to depend on the SNIF morphology, which is modified by changes of the deposition conditions. The highest enhancement factor in the range of 105 was achieved for SNIFs that have oval and circular silver nanoislands with small distances between them

Analysis of the Morphology and Structure of Carbon Deposit Formed on the Surface of Ni3Al Foils as a Result of Thermocatalytic Decomposition of Ethanol

This article presents the results of investigations of the morphology and structure of carbon deposit formed as a result of ethanol decomposition at 500 °C, 600 °C, and 700 °C without water vapour and with water vapour (0.35 and 1.1% by volume). scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) observations as well as energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), and Raman spectroscopic analyses allowed for a comprehensive characterization of the morphology and structure of cylindrical carbon nanostructures present on the surface of the Ni3Al catalyst. Depending on the reaction mixture composition (i.e., water vapour content) and decomposition temperature, various carbon nanotubes/carbon nanofibres (CNTs/CNFs) were observed: multiwalled carbon nanotubes, herringbone-type multiwall carbon nanotubes, cylindrical carbon nanofibers, platelet carbon nanofibers, and helical carbon nanotubes/nanofibres. The discussed carbon nanostructures exhibited nickel nanoparticles at the ends and in the middle part of the carbon nanostructures as catalytically active centres for efficient ethanol decomposition

Multi-technique characterisation of InAs-on-GaAs wafers with circular defect pattern

The article presents the results of diameter mapping for circular-symmetric disturbance of homogeneity of epitaxially grown InAs (100) layers on GaAs substrates. The set of acceptors (beryllium) doped InAs epilayers was studied in order to evaluate the impact of Be doping on the 2-inch InAs-on-GaAs wafers quality. During the initial identification of size and shape of the circular pattern, non-destructive optical techniques were used, showing a 100% difference in average roughness between the wafer centre and its outer part. On the other hand, no volumetric (bulk) differences are detectable using Raman spectroscopy and highresolution X-ray diffraction. The correlation between Be doping level and circular defect pattern surface area has been found

Low-voltage anodizing of copper in sodium bicarbonate solutions

The low-voltage (< 5 V) anodization of copper in aqueous solutions of sodium bicarbonate was studied for the first time. As demonstrated, this method leads to the formation of microstructures on a copper surface, that are composed of malachite (CuCO3·Cu(OH)2). Moreover, by tuning the operating conditions, i.e., applied cell voltage and electrolyte concentration, different surface morphologies can be grown. As shown by electron microscopy investigation, clusters of ribbons corrosion pits or nonuniformly located powdery precipitates are formed when the low anodizing voltage is applied. Anodization at 1.0 V in 0.4 M sodium bicarbonate solution led to the formation of a velvet-like, deep black anodic layer that covered the whole metal surface with ribbon-resembling structures. A thorough investigation of the obtained anodic layers with X-ray diffraction (XRD), X-ray adsorption (XAS), Raman, and X-ray Photoelectron Spectroscopy (XPS) uncovered the mixed crystalline-amorphous nature of the anodic copper species. Besides dominating the crystalline malachite phase, the amorphous cupric oxide was also identified. This composition offers promising features for catalytic applications, hence, low-voltage anodized copper was tested in an electrochemical CO2 reduction reaction to explore one possible application of the presented material. The current density of 4.7 mA cm−2 was registered for the selected sample.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Peyman Taher

Effect of ultraviolet light on 1/f noise in carbon nanotube networks

Noise defines the minimum level of the operational signal and is an important figure of merit for various devices. Here, we studied the low-frequency (1/f) noise characteristics of randomly oriented networks of carbon nanotubes and examined the effect of ultraviolet (UV) light on it. The amplitude of 1/f noise in our devices was strongly affected by the quality of nanotubes. This makes noise spectroscopy an effective tool to characterize the structural quality of carbon nanotube devices. UV illumination increased the device resistance and noise amplitude preserving the spectra shapes. This effect remained for tens of minutes even after the UV light was turned off. We observed a completely different trend of noise spectra and resistance with temperature as compared to UV illumination. These results indicated at least two important components of resistance that contribute to the total resistance of the device and are essential to describe the nanotube networks correctly.QC 20201014</p

The Multi-Gas Sensor for Remote UAV and UGV Missions—Development and Tests

In this article, we present a versatile gas detector that can operate on an unmanned aerial vehicle (UAV) or unmanned ground vehicle (UGV). The device has six electrochemical modules, which can be selected to measure specific gases, according to the mission requirements. The gas intake is realized by a miniaturized vacuum pump, which provides immediate gas distribution to the sensors and improves a fast response. The measurement data are sent wirelessly to the operator’s computer, which continuously stores results and presents them in real time. The 2 m tubing allows measurements to be taken in places that are not directly accessible to the UGV or the UAV. While UAVs significantly enhanced the versatility of sensing applications, point gas detection is challenging due to the downwash effect and gas dilution produced by the rotors. In our work, we demonstrated the method of downwash effect reduction at aerial point gas measurements by applying a long-distance probe, which was kept between the UAV and the examined object. Moreover, we developed a safety connection protecting the UAV and sensor in case of accidental jamming of the tubing inside the examined cavity. The methods presented provide an effective gas metering strategy using UAVs