926 research outputs found

    Erythropoietin production by fetal mouse liver cells in response to hypoxia and adenylate cyclase stimulation

    Get PDF
    This study was done to investigate aspects of control of extrarenal erythropoietin (Ep) production. To this end we studied the effects of three stimuli of renal Ep production in the adult, i.e. hypoxia, cobalt, and activation of adenylate cyclase on Ep generation by cultured fetal mouse liver cells. The fetal liver was taken as a model for extrarenal Ep production because this organ is considered the predominant site of extrarenal Ep production. We found that Ep production by the cells increased as the oxygen concentration was decreased in the incubation atmosphere from 20% to 1%. Cobalt (10(-4)-10(-5) M) had no effect on Ep production. Activation of adenylate cyclase by forskolin (10(-5) M) or isoproterenol (10(-5) M) greatly enhanced Ep production. These findings indicate that the Ep-stimulating effect of cobalt is specific for the kidney. However, oxygen depletion and activation of adenylate cyclase seem to be more general stimuli in Ep-producing cells. Furthermore we found that Ep production in hypoxia correlated with lactate formation in the cultured liver cells. This finding suggests that Ep production in fetal livers under hypoxic conditions parallels the shift from aerobic to anaerobic cellular energy metabolism

    Copper-based Dye-sensitized Solar Cells with Quasi-Solid Nano Cellulose Composite Electrolytes

    Get PDF
    The study presented describes the preparation of solvent-free nano composite gel electrolytes in combination with  copper(I)-based dye-sensitized solar cells (DSSCs). The electrolytes comprise poly(ethylene oxide) (PEO) and cellulose nano crystals (CNCs) and an I 3 – /I – redox shuttle. The quasi-solid-state DSSCs show increased photoconversion performance with increased amount of CNC in the electrolyte. DSSC performances measured on the day that the devices are fabricated show that when the electrolyte is composed of 80% CNC, a cell efficiency of 1.09% is reached compared to 1.16% using a standard liquid I 3 – /I – electrolyte. DSSCs containing the nano composites and the copper(I)-based dye show robust stability over time, and after 60 days, DSSCs with the PEO/CNC/I 3 – /I – electrolyte outperform those containing the liquid electrolyt

    The structure of human dermatan sulfate epimerase 1 emphasizes the importance of C5 epimerization of glucuronic acid in higher organisms

    Get PDF
    Dermatan sulfate epimerase 1 DS epi1, EC 5.1.3.19 catalyzes the conversion of D glucuronic acid to L iduronic acid on the polymer level, a key step in the biosynthesis of the glycosaminoglycan dermatan sulfate. Here, we present the first crystal structure of the catalytic domains of DS epi1, solved at 2.4 resolution, as well as a model of the full length luminal protein obtained by a combination of macromolecular crystallography and targeted cross linking mass spectrometry. Based on docking studies and molecular dynamics simulations of the protein structure and a chondroitin substrate, we suggest a novel mechanism of DS epi1, involving a His double Tyr motif. Our work uncovers detailed information about the domain architecture, active site, metal coordinating center and pattern of N glycosylation of the protein. Additionally, the structure of DS epi1 reveals a high structural similarity to proteins from several families of bacterial polysaccharide lyases. DS epi1 is of great importance in a range of diseases, and the structure provides a necessary starting point for design of active site inhibitor

    Soft and rigid core latex nanoparticles prepared by RAFT-mediated surfactant-free emulsion polymerization for cellulose modification – a comparative study

    Get PDF
    Latex nanoparticles comprising cationically charged coronas and hydrophobic cores with different glass transition temperatures (Tg) have been prepared by surfactant-free, RAFT-mediated emulsion polymerization, where the particles form through a polymerization-induced self-assembly (PISA) type mechanism. Poly(2-dimethylaminoethyl methacrylate-co-methacrylic acid) (P(DMAEMA-co-MAA)) was utilized as a hydrophilic macroRAFT agent for the polymerization of methyl methacrylate (MMA) or n-butyl methacrylate (nBMA), respectively, resulting in two different latexes, with either a core of high (PMMA) or low (PnBMA) Tg polymer. By varying the molar mass of the hydrophobic block, latexes of different sizes were obtained (DHca. 40–120 nm). The adsorption of the latexes to cellulose model surfaces and cellulose nanofibrils (CNF) was studied using quartz crystal microbalance with dissipation monitoring (QCM-D). The surfaces with adsorbed PnBMA latexes yielded hydrophobic surfaces both before and after annealing, whereas surfaces with adsorbed PMMA latex became hydrophobic only after annealing, clearly showing the influence of the Tg of the core. The latexes were also used to modify macroscopic cellulose in the form of filter papers. Similar to the CNF surfaces, no annealing was required to achieve hydrophobic surfaces with PnBMA latexes. Finally, nanocomposites of CNF and the polymer nanoparticles were prepared through a one-pot mixing procedure. It was found that the largest synthesized PMMA latex (120 nm) facilitated a more strainable CNF network at 50% relative humidity, with a nearly 200% increase in strain at break compared to the neat CNF reference film as well as to the composite films with PnBMA latexes or to the smaller sized PMMA latexes. This difference was attributed to the spherical shape and rigidity of the large PMMA latex nanoparticles during composite formation. This highly interesting result should indeed be considered in the future design of novel biocomposites.</p

    Bias-voltage dependence of the magneto-resistance in ballistic vacuum tunneling: Theory and application to planar Co(0001) junctions

    Full text link
    Motivated by first-principles results for jellium and by surface-barrier shapes that are typically used in electron spectroscopies, the bias voltage in ballistic vacuum tunneling is treated in a heuristic manner. The presented approach leads in particular to a parameterization of the tunnel-barrier shape, while retaining a first-principles description of the electrodes. The proposed tunnel barriers are applied to Co(0001) planar tunnel junctions. Besides discussing main aspects of the present scheme, we focus in particular on the absence of the zero-bias anomaly in vacuum tunneling.Comment: 19 pages with 8 figure

    Patients' initial steps to cancer diagnosis in Denmark, England and Sweden: what can a qualitative, cross-country comparison of narrative interviews tell us about potentially modifiable factors?

    Get PDF
    OBJECTIVES: To illuminate patterns observed in International Cancer Benchmarking Programme studies by extending understanding of the various influences on presentation and referral with cancer symptoms. DESIGN: Cross-country comparison of Denmark, England and Sweden with qualitative analysis of in-depth interview accounts of the prediagnostic process in lung or bowel cancer. PARTICIPANTS: 155 women and men, aged between 35 and 86 years old, diagnosed with lung or bowel cancer in 6 months before interview. SETTING: Participants recruited through primary and secondary care, social media and word of mouth. Interviews collected by social scientists or nurse researchers during 2015, mainly in participants' homes. RESULTS: Participants reported difficulties in interpreting diffuse bodily sensations and symptoms and deciding when to consult. There were examples of swift referrals by primary care professionals in all three countries. In all countries, participants described difficulty deciding if and when to consult, highlighting concerns about access to general practitioner appointments and overstretched primary care services, although this appears less prominent in the Swedish data. It was not unusual for there to be more than one consultation before referral and we noted two distinct patterns of repeated consultation: (1) situations where the participant left the primary care consultation with a plan of action about what should happen next; (2) participants were unclear about under which conditions to return to the doctors. This second pattern sometimes extended over many weeks during which patients described uncertainty, and sometimes frustration, about if and when they should return and whether there were any other feasible investigations. The latter pattern appeared more evident in the interviews in England and Denmark than Sweden. CONCLUSION: We suggest that if clear action plans, as part of safety netting, were routinely used in primary care consultations then uncertainty, false reassurance and the inefficiency and distress of multiple consultations could be reduced
    corecore