Novel linear piezo‐resistive auxetic meta‐sensors with low Young's modulus by a core–shell conceptual design and electromechanical modelling

Production of piezo-resistive auxetic sensors is usually carried out through mixing and coating methods. Although these methods are beneficial, Young's modulus of mixed sensors becomes high because of using a high percentage of sensing elements while the durability of coated sensors gets low due to the separation of sensing elements from the sensor surface. This article presents a new core–shell metamaterial model to address the mentioned problems. The shell and the core are produced of polydimethylsiloxane (PDMS) rubber and a mixture of PDMS/graphite powders (73.45 wt% graphite powders), respectively. A finite element model is developed via COMSOL software to predict the electromechanical behaviors of the created sensor and verified by an experimental study. Scanning electron microscope imaging is conducted to detect the separations of the graphite particles. The main important feature of this meta-sensor is to possess a linear sensitivity due to having zero Poisson's ratio. The advantage of this method is that Young's modulus of the sensor does not decrease (unlike the mixing method), and the sensor-coated particles do not separate from the sensor after a while (unlike the coating method). The introduced model has advantages that promote potential applications such as using sensory gloves to detect, for instance, human hand movements

CMSRPC efficiency measurement using the tag-and-probe method

We measure the efficiency of CMS Resistive Plate Chamber (RPC) detectors in proton-proton collisions at the centre-of-mass energy of 13 TeV using the tag-and-probe method. A muon from a Z(0) boson decay is selected as a probe of efficiency measurement, reconstructed using the CMS inner tracker and the rest of CMS muon systems. The overall efficiency of CMS RPC chambers during the 2016-2017 collision runs is measured to be more than 96% for the nominal RPC chambers

High voltage calibration method for the CMS RPC detector

The Resistive Plate Chambers (RPC) are used for muon triggers in the CMS experiment. To calibrate the high voltage working-points (WP) and identify degraded detectors due to radiation or chemical damage, a high voltage scan has been performed using 2017 data from pp collisions at a center-of-mass energy of 13 TeV. In this paper, we present the calibration method and the latest results obtained for the 2017 data. A comparison with all scans taken since 2011 is considered to investigate the stability of the detector performance in time

RPC upgrade project for CMS Phase II

The Muon Upgrade Phase II of the Compact Muon Solenoid (CMS) aims to guarantee the optimal conditions of the present system and extend the eta coverage to ensure a reliable system for the High Luminosity Large Hadron Collider (HL-LHC) period. The Resistive Plate Chambers (RPCs) system will upgrade the off-detector electronics (called link system) of the chambers currently installed chambers and place improved RPCs (iRPCs) to cover the high pseudo-rapidity region, a challenging region for muon reconstruction in terms of background and momentum resolution. In order to find the best option for the iRPCs, an R&D program for new detectors was performed and real size prototypes have been tested in the Gamma Irradiation Facility (GIF++) at CERN. The results indicated that the technology suitable for the high background conditions is based on High Pressure Laminate (HPL) double-gap RPC. The RPC Upgrade Phase II program is planned to be ready after the Long Shutdown 3 (LS3)

The CMS RPC detector performance and stability during LHC RUN-2

The CMS experiment, located at the Large Hadron Collider (LHC) in CERN, has a redundant muon system composed by three different gaseous detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region), and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. The CMS RPC system confers robustness and redundancy to the muon trigger. The RPC system operation in the challenging background and pileup conditions of the LHC environment is presented. The RPC system provides information to all muon track finders and thus contributing to both muon trigger and reconstruction. The summary of the detector performance results obtained with proton-proton collision at root s = 13 TeV during 2016 and 2017 data taking have been presented. The stability of the system is presented in terms of efficiency and cluster size vs time and increasing instantaneous luminosity. Data-driven predictions about the expected performance during High Luminosity LHC (HL-LHC) stage have been reported

RPC radiation background simulations for the high luminosity phase in the CMS experiment

The high luminosity expected from the HL-LHC will be a challenge for the CMS detector. The increased rate of particles coming from the collisions and the radioactivity induced in the detector material could cause significant damage and result in a progressive degradation of its performance. Simulation studies are very useful in these scenarios as they allow one to study the radiation environment and the impact on detector performance. Results are presented for CMS RPC stations considering the operating conditions expected at the HL-LHC