208 research outputs found
One-step femtosecond laser ablation synthesis of sub-3 nm gold nanoparticles stabilized by silica
Metal-Oxide Nanostructures Fabricated from Reactive Laser Ablation in Liquid
The development of metal-oxide nanostructures is a growing area due to their applications in diverse fields spanning energy conversion and storage, chemical manufacturing, and en- vironmental technology. This interest in catalytically active nanomaterials has prompted the synthesis and investigation of highly functionalized nanoparticles (NPs), including core- shell, silicate-stabilized, and bi- and multi-metallic nanocomposites. While wet-chemical synthesis methods of metal-oxide nanostructures have led to several morphologies, compositions, and shapes, these syntheses often require high temperatures, toxic solvents or reducing agents, and long reaction times.
Laser synthesis and processing of colloids (LSPC) encompasses both ātop downā and ābottom upā approaches to synthesize metal-oxide nanostructures. Pulsed laser ablation in liquid (PLAL) involves focusing laser pulses onto a solid target immersed in a liquid in which target atoms coalesce to form nanostructured materials once ejected into solution. Laser reduction in liquid (LRL) is a second laser-assisted approach to synthesizing nanomaterials, where photochemical reduction of metal salts is achieved by focusing the laser beam into solution. Both PLAL and LRL are able to generate metal and semiconductor NPs at room temperature in aqueous solutions without added surfactants or stabilizers, giving them an advantage over conventional wet-chemical methods.
Recently, these two approaches have been combined into a single step- referred to as reactive laser ablation in liquid (RLAL), in which laser ablation of a solid target is carried out in a metal salt solution. This work goes through the synthesis and characterization of femtosecond-RLAL (fs-RLAL)-generated silica-metal nanostructures, and discusses the relationship between the precursor solution composition, the product morphology, and the catalytic activity toward a model para-nitrophenol (PNP) reduction reaction. First, silica-Au NPs were synthesized, exhibiting two populations of product nanoparticles which resulted from reaction dynamics occurring on two distinct timescales. Next, silica-Cu NPs were synthesized under different pH conditions, yielding pH-dependent product morphology. The different morphologies resulted from the surface charge of ablated silica species, which repelled the Cu2+ ions in solution at low pH yielding core/shell morphology, and attracted the Cu2+ ions at high pH, forming well-dispersed ā¼1.5 nm Cu clusters stabilized by a phyllosilicate matrix. This led to the investigation of pH-dependent dissolved silicate species generated from ablating the Si wafer in water and solutions of added Ni(NO3)2 over a range of pH conditions. When the solution was above pH 10, silicic acid was generated which was the key species leading to the formation of nickel-phyllosilicate (Ni-PS) when nickel nitrate was added to solution. When the solution was below pH 7, no silicic acid was generated from ablation, and consequently no Ni-PS was formed in the dried product. The mechanism of Ni-PS formation from fs-RLAL of a silicon wafer immersed in aqueous nickel nitrate solu- tions is discussed. Based on this mechanism, it is expected that the fs-RLAL method will be capable of generating a variety of metal-phyllosilicates from different metal salt precursors
Roles of Free Electrons and H2O2 in the Optical Breakdown-Induced Photochemical Reduction of Aqueous [AuCl4]-
Free electrons and H2O2 formed in an optical breakdown plasma are found to directly control the kinetics of [AuCl4]ā reduction to form Au nanoparticles (AuNPs) during femtosecond laser-assisted synthesis of AuNPs. The formation rates of both free electrons and H2O2 strongly depend on the energy and duration of the 800 nm laser pulses over the ranges of 10ā2400 Ī¼J and 30ā1500 fs. By monitoring the conversion of [AuCl4]ā to AuNPs using in situ UVāvis spectroscopy during laser irradiation, the first- and second-order rate constants in the autocatalytic rate law, k1 and k2, were extracted and compared to the computed free electron densities and experimentally measured H2O2 formation rates. For laser pulse energies of 600 Ī¼J and lower at all pulse durations, the first-order rate constant, k1, was found to be directly proportional to the theoretically calculated plasma volume, in which the electron density exceeds the threshold value of 1.8 Ć 1020 cmā3. The second-order rate constant, k2, was found to correlate with the measured H2O2 formation rate at all pulse energies and durations, resulting in the empirical relationship k2 ā H2O20.5. We have demonstrated that the relative composition of free electrons and H2O2 in the optical breakdown plasma may be controlled by changing the pulse energy and duration, which may make it possible to tune the size and dispersity of AuNPs and other metal nanoparticle products synthesized with femtosecond laser-based methods
Radical Chemistry in a Femtosecond Laser Plasma: Photochemical Reduction of Ag+ in Liquid Ammonia Solution
Plasmas with dense concentrations of reactive species such as hydrated electrons and hydroxyl radicals are generated from focusing intense femtosecond laser pulses into aqueous media. These radical species can reduce metal ions such as Au3+ to form metal nanoparticles (NPs). However, the formation of H2O2 by the recombination of hydroxyl radicals inhibits the reduction of Ag+ through back-oxidation. This work has explored the control of hydroxyl radical chemistry in a femtosecond laser-generated plasma through the addition of liquid ammonia. The irradiation of liquid ammonia solutions resulted in a reaction between NH3 and OHĀ·, forming peroxynitrite and ONOOā, and significantly reducing the amount of H2O2 generated. Varying the liquid ammonia concentration controlled the Ag+ reduction rate, forming 12.7 Ā± 4.9 nm silver nanoparticles at the optimal ammonia concentration. The photochemical mechanisms underlying peroxynitrite formation and Ag+ reduction are discussed
Au Nanoparticle Synthesis Via Femtosecond Laser-Induced Photochemical Reduction of [AuCl4]ā
Laser-assisted metallic nanoparticle synthesis is a versatile āgreenā method that has become a topic of active research. This chapter discusses the photochemical reaction mechanisms driving AuCl4ā reduction using femtosecond-laser irradiation, and reviews recent advances in Au nanoparticle size-control. We begin by describing the physical processes underlying the interactions between laser pulses and the condensed media, including optical breakdown and supercontinuum emission. These processes produce a highly reactive plasma containing free electrons, which reduce AuCl4ā, and radical species producing H2O2 that cause autocatalytic growth of Au nanoparticles. Then, we discuss the reduction kinetics of AuCl4ā, which follow an autocatalytic rate law in which the first- and second-order rate constants depend on free electrons and H2O2 availability. Finally, we explain strategies to control the size of gold nanoparticles as they are synthesized; including modifications of laser parameters and solution compositions
Performance and Life Tests of a Regenerative Blower for EVA Suit Ventilation
Ventilation fans for future space suits must meet demanding performance specifications, satisfy stringent safety requirements for operation in an oxygen atmosphere, and be able to increase output to operate in buddy mode. A regenerative blower is an attractive choice due to its ability to meet these requirements at low operating speed. This paper describes progress in the development and testing of a regenerative blower designed to meet requirements for ventilation subsystems in future space suits. The blower includes a custom-designed motor that has significantly improved its efficiency. We have measured the blower s head/flow performance and power consumption under conditions that simulate both the normal and buddy mode operating points. We have operated the blower for TBD hours and demonstrated safe operation in an oxygen test loop at prototypical pressures. We also demonstrated operation with simulated lunar dust
Nucleation and growth of gold nanoparticles initiated by nanosecond and femtosecond laser irradiation of aqueous [AuCl4]-
Irradiation of aqueous [AuCl4]with 532 nm nanosecond (ns) laser pulses produces monodisperse (PDI = 0.04) 5 nm Au nanoparticles (AuNPs) without any additives or capping agents via a plasmon- enhanced photothermal autocatalytic mechanism. Compared with 800 nm femtosecond (fs) laser pulses, the AuNP growth kinetics under ns laser irradiation follow the same autocatalytic rate law, but with a significantly lower sensitivity to laser pulse energy. The results are explained using a simple model for simulating heat transfer in liquid water and at the interface with AuNPs. While the extent of water superheating with the ns laser is smaller compared to the fs laser, its significantly longer duration can provide sufficient energy to dissociate a small fraction of the [AuCl4]present, resulting in the formation of AuNPs by coalescence of the resulting Au atoms. Irradiation of initially formed AuNPs at 532 nm results in plasmon-enhanced superheating of water, which greatly accelerates the rate of thermal dissociation of [AuCl4]and accounts for the observed autocatalytic kinetics. The plasmon-enhanced heating under ns laser irradiation fragments the AuNPs and results in nearly uniform 5 nm particles, while the lack of particlesā heating under fs laser irradiation results in the growth of the particles as large as 40 nm
The Disruptive Technology That is Additive Construction: System Development Lessons Learned for Terrestrial and Planetary Applications
Disruptive technologies are unique in that they spawn other new technologies and applications as they grow. These activities are usually preceded by the question, "What If?" For example, "What if we could use an emerging technology and in-situ materials to promote exploration on the Moon or Mars, and then use that same technology to keep our troops out of harm's way and/or help the worlds' homeless?" This question allows us to flip the mindset of "how can people create more valuable innovation?" to "how can innovation create more valuable people?." This approach allows us to view augmented human labor as an inclusive opportunity, not a threat. The discipline of Additive Construction is growing rapidly due to the flexibility, speed, safety and logistics benefits offered as compared to standard construction techniques. Additive construction is a disruptive technology in that it employs the principles of additive manufacturing on a human habitat structure scale. Developed initially for emergency management and disaster relief applications, additive construction has now grown into military infrastructure and planetary (Moon and Mars) surface infrastructure applications as well. Additive Construction with Mobile Emplacement (ACME) is a NASA technology development project that seeks to demonstrate the feasibility of constructing shelters for human crews, and other surface infrastructure, on the Moon or Mars for a future human presence. The ACME project will allow, for the first time, the 3-dimensional printing of surface structures on planetary bodies using local materials for construction, thereby tremendously reducing launch and transportation mass and logistics. Some examples of infrastructure that could be constructed using robotic additive construction methods are landing pads, rocket engine blast protection berms, roads, dust free zones, equipment shelters, habitats and radiation shelters. Terrestrial applications include the development of surface structures using Earth-based materials for emergency response, disaster relief, general construction, and housing at all economic levels. This paper will describe the progress made by the NASA ACME project with a focus on prototypes and full scale additive construction demonstrations using both Portland cement concrete and other indigenous material mixtures. Rationale for the use of additive construction for both terrestrial and planetary applications will be explored and a thorough state-of-the-art of additive construction techniques will be presented. An evolutionary history of NASA's additive construction development efforts, dating back to 2004, will be included. The paper will then step through a series of trade studies performed to inform key processing and design decisions in the development of the full-scale ACES-3 system developed by NASA and the Jacobs Space Exploration Group for the U.S. Army Corps of Engineers (USACE) Construction Engineers Research Laboratory (CERL) in Champaign, IL. The selection of aggregate and binders, based on in-situ materials, will also be presented and discusse
Lewis pair polymerization by classical and frustrated Lewis pairs: acid, base and monomer scope and polymerization mechanism
Classical and frustrated Lewis pairs (LPs) of the strong Lewis acid (LA) Al(C6F5)3 with several Lewis
base (LB) classes have been found to exhibit exceptional activity in the Lewis pair polymerization (LPP)
of conjugated polar alkenes such as methyl methacrylate (MMA) as well as renewable Ī±-methylene-
Ī³-butyrolactone (MBL) and Ī³-methyl-Ī±-methylene-Ī³-butyrolactone (Ī³-MMBL), leading to high molecular
weight polymers, often with narrow molecular weight distributions. This study has investigated a large
number of LPs, consisting of 11 LAs as well as 10 achiral and 4 chiral LBs, for LPP of 12 monomers of
several different types. Although some more common LAs can also be utilized for LPP, Al(C6F5)3-based
LPs are far more active and effective than other LA-based LPs. On the other hand, several classes of LBs,
when paired with Al(C6F5)3, can render highly active and effective LPP of MMA and Ī³-MMBL; such
LBs include phosphines (e.g., PtBu3), chiral chelating diphosphines, N-heterocyclic carbenes (NHCs),
and phosphazene superbases (e.g., P4-tBu). The P4-tBu/Al(C6F5)3 pair exhibits the highest activity of the
LP series, with a remarkably high turn-over frequency of 9.6 Ć 104 hā1 (0.125 mol% catalyst, 100%
MMA conversion in 30 s, Mn = 2.12 Ć 105 g molā1, PDI = 1.34). The polymers produced by LPs at RT
are typically atactic (PĪ³MMBL with ā¼47% mr) or syndio-rich (PMMAwith ā¼70ā75% rr), but highly
syndiotactic PMMAwith rr ā¼91% can be produced by chiral or achiral LPs at ā78 Ā°C. Mechanistic
studies have identified and structurally characterized zwitterionic phosphonium and imidazolium
enolaluminates as the active species of the current LPP system, which are formed by the reaction of the
monomerĀ·Al(C6F5)3 adduct with PtBu3 and NHC bases, respectively. Kinetic studies have revealed that
the MMA polymerization by the tBu3P/Al(C6F5)3 pair is zero-order in monomer concentration after an
initial induction period, and the polymerization is significantly catalyzed by the LA, thus pointing to a
bimetallic, activated monomer propagation mechanism. Computational study on the active species
formation as well as the chain initiation and propagation events involved in the LPP of MMAwith some
of the most representative LPs has added our understanding of fundamental steps of LPP. The main
difference between NHC and PR3 bases is in the energetics of zwitterion formation, with the NHC-based
zwitterions being remarkably more stable than the PR3-based zwitterions. Comparison of the
monometallic and bimetallic mechanism
- ā¦