175 research outputs found
Fatalism and Poverty in Fishing Communities
This study aims to reveal the fatalistic work culture process as a cause of poverty for fishermen. As part of an urgent cultural aspect, Fatalism has been an inseparable part of their social life. Fatalism is an attitude that has been a stronghold for a long time and becomes a habit. In this case, the most important thing to express is the belief or trust of fishermen related to the coastal environment. This research took place on the southern coast of the Sulawesi Island, in Pandang-Pandang village, Arungkeke District, Jeneponto Regency, South Sulawesi Province, Indonesia. The informants were 5 poor fishermen from the Sawi (fishing boat crew) who were interviewed in-depth and conducted observation of the surrounding environment. To strengthen research data, Literature studies, interview and observation results were also conducted. Data analysis used three path techniques including data reduction, categorization, and conclusion drawing. This research shows that; (1) The fatalistic attitude of the fishing community of Pandang-Pandang village manifested in the belief that life has been determined by God while humans only live and accept it, (2) Weak instrumental values ​​of the fishing community in the form of not overly pursuing more values ​​at work. Both of these are fatalistic attitudes. The conclusion of this research is the emergence of a fatalistic attitude in the fishing community is the result of their appreciation of God, Nature, Humans, and Life. This appreciation has been going on for a long time so that it is manifested in the form of an attitude of life than becoming an actor
Utilizing rapid prototyping 3D printer for fabricating flexographic PDMS printing plate
Recently printed electronic field is significantly growth. Printed electronic is to develop electrical devices by printing method. Conventional printing method that has been studied for this kind of printed electronic such as flexographic, micro contact printing, screen printing, gravure and ink jet. In flexographic and microcontact printing, a printing plate is used to transfer the designed and desired pattern to substrate through conformed contact. Therefore printing plate is play a big role in this area. Printing plate making by photopolymer which used in flexographic have limitation in achieving a micro-scale of pattern size. However, printing plate of microcontact printing have an advantages in producing micro, even nano-scale size by PDMS (Polydimethylsiloxane). Hence, rapid prototyping 3D printer was used for developing a PDMS micro-scale printing plate which will be used in reel to reel (R2R) flexographic due to high speed, low cost, mass production of this type of printing process. The flexibility of 3D printer in producing any shape of pattern easily, contributed the success of this study. A nickel plating and glass etching master pattern was used in this study too as master pattern mould since 3D printer has been reached the micro size limitation. The finest multiple solid line array with 1mm width and 2mm gap pattern of printing plate was successfully fabricated by 3D printer master mould due to size limitation of the FDM (Fused Deposition Modeling) 3D printer nozzle itself. However, the micro-scale multiple solid line array of 100micron and 25micron successfully made by nikel platting and glass etching master mould respectively. Those types of printing plate producing method is valueable since it is easy, fast and low cost, used for micro-flexographic in printed electronic field or biomedical application
Development of coated peanut separator and frying skillet machine
Coated peanut which known as Kacang Bersalut Istimewa Deqyoung is a product made from groundnut mix with flour and special spices. Currently, there are some issues with the product that slow down the production process. The groundnut is sticking and become like a ping pong size ball and the time consuming to fry is longer. Coated peanut separator and frying skillet machine can overcome the problems and able to increase the production. Furthermore, the machine aim to facilitate workers to carry out their duties and to assist small and medium industries (SMEs) in Malaysia. The design convenient, determination of the material selection and the main components that help to operate the machine are the main aspects have been considered. Design analysis helps to identify the capability of the machine when the forces act at some main parts of the machine. The comparison between manual method and semi-automatic method shows that the production increase. By using semi-automatic method of production, the increment shows almost 84 percent of production compares to manual method
Young\u27s modulus of [111] germanium nanowires
This paper reports a diameter-independent Young’s modulus of 91.9 ± 8.2 GPa for [111] Germaniumnanowires (Ge NWs). When the surface oxide layer is accounted for using a core-shell NW approximation, the YM of the Ge core approaches a near theoretical value of 147.6 ± 23.4 GPa. The ultimate strength of a NW device was measured at 10.9 GPa, which represents a very high experimental-to-theoretical strength ratio of ∼75%. With increasing interest in this material system as a high-capacity lithium-ion battery anode, the presented data provide inputs that are essential in predicting its lithiation-induced stress fields and fracture behavior
Study on Finite Element Analysis of Fine Solid Lines by Flexographic Printing in Printed Antennas for RFID Transponder
Printing is offering the feasibility of producing mass quantities of a wide variety of electronic components and devices quickly and at lower cost. Flexography is mainly used for packaging applications, but is also poses a potential method for the micro manufacture of electronic devices, smart packaging and RFID. The flexographic printing process poses as an attractive candidate for printing electronics for its high speed printing capabilities where such volume and large active areas need to be printed. Therefore an investigation for its potential usage in printing electronics are highly in demand hence a research for suitable conductive ink related to this process is vital. Multiple fine solid lines of high quality are essential to enable printing of ink tracks for electronic applications. A step by step approach by printing multiple solid lines, measurements of printing plates and printed images and finite element analysis (FEA) need to be carried out in advance to help comprehending this process that is influenced by many interacting parameters. Plate characteristics are among a number of process parameters that will influence print line quality, which will affect the electrical performance of printed tracks. Printing trials have also been carried out in comparison various ink to check the compatibility and the suitability of the ink developed for printing RFID antennas
A study of printed La₂O₃ on carbon-glass substrate for micro-flexographic printing process using angle resolve x-ray photoelectron spectroscopy (AEXPS) analysis
Micro-flexographic printing process involved in patterning technique from micron to nano scale range to be used for graphic, electronic and bio-medical device on variable substrates. Adhesive property of printing process could be described as an interchangeably with some ink or medium and substrate which was applied to one surface of two separate items that bonded together. Lanthanum oxide (La2O3) had been used as a rare earth metal candidate as printing ink medium. This metal deposit was printed on carbon-glass substrate. The choose of Lanthanum Oxide as a target is due to its wide application in producing electronic devices such as thin film battery and printed circuit board. The La2O3 deposited on the surface of carbon-glass substrate was then analyzed using Angle Resolve X-Ray Photoelectron Spectroscopy (ARXPS). The position for each synthetic component in the narrow scan of Lanthanum (La) 3d and O 1s are referred to the electron binding energy (eV). This research was focused on 3 narrow scan regions which are C 1s, O 1s and La 3d. Further discussion of the spectrum evaluation was discussed in detail. Here, it was proposed that from the adhesive properties of La was suitable as an alternative medium for micro-flexographic printing technique in printing multiple fine solid lines image at micro to nano scale feature. Hence, this paper will describe the capability of this particular metal as rare earth metal in a practice of micro-flexographic printing process
Construction of English language skills as human capital and ELT as development aid in Bangladesh
A Study on Printed Multiple Solid Line by Combining Microcontact and Flexographic Printing Process for Microelectronic and Biomedical Applications
: Microcontact printing (µCP) is an outstanding surface patterning technique in micron scale and, even in nano scale. Surface science communities like engineers and biologists have been promoting attention in µCP, therefore they have been rich in improvement to the µCP process itself. However the process is relatively slow in production. Meanwhile flexographic technique is a high speed roll to roll process, but low in resolution and still has limitation in printing of micro-scale size. Now a day, low cost fabrication is keys to the successful introduction of printed electronics and roll to roll manufacturing processes. Therefore, study to extend flexographic into the micro-scale size resolutions, may provide an economical commercialization path for electronic devices since, flexographic is a high speed technique commonly used for printing onto very large area flexible substrates. Although low resolution and poor registration are characteristics of today's flexographic process, it has many potential to achieve fine solid line micro size by combining to microcontact printing because both of them having similarities in method of carrying printed pattern to a substrates. This study have been demonstrated that 10micron line with 10micron gap successfully printed by these 2 combinations printing techniques, using graphic ink and biological ink with is Fetal Bovine Serum
- …