1,719 research outputs found

    CdTe solar cells: growth phenomena and device performance

    Get PDF
    A systematic study is presented on the control of CdTe and CdS layers during their growth, with the understanding gained being implemented in the production of solar cells with enhanced performance. In particular the growth mechanisms for close space sublimation (CSS) — grown CdTe were evaluated as a function of processing gas (N2, 02 and H2) and nitrogen pressure. Films were shown to form via the Volmer-Weber growth mode with films deposited under nitrogen showing well defined crystal facets. Inclusion of oxygen in the deposition ambient produced islands of a rounded morphology, reduced size and increased number density, whilst hydrogen was shown to increase the island number density and the level of substrate coverage. Growth mechanisms were deduced from the morphologies observed at different stages of growth by ex-situ AFM and SEM and by comparison with growth literature, especially the work of P. Barna. Nucleation density, step flow and impurity incorporation are all invoked in the discussion.Factors influencing the cell performance were evaluated with the aid of a optical beam induced current (OBIC) and external quantum efficiency (EQE) system built as part of this work and having the capacity to measure EQE or OBIC maps with a resolution of 12.5pm. The system was used to evaluate the photovoltaic response of CdTe/CdS devices as a function of wavelength with the impact of the nitric-phosphoric acid (NP) etch on the back surface, the uniformity of CdTe/CdS devices deposited by different methods and the effect of absorber layer thickness of PV uniformity being assessed. The performance of CdTe/CdS devices was evaluated as a function of variables that could be influenced by growth of the CdTe and CdS layers. The use of lower substrate temperature and the incorporation oxygen in CdS increased V„ from 0.51 to 0.65V is discussed. Oxygen in the CdTe was also shown to influence the junction position and hence efficiency, while oxygen in the CdS layer was also shown to be vital for the formation of hetero-junctions. The CdTe grain size was shown to be significantly increased for deposition under higher nitrogen pressures (Grain diameter = [0.027P + 0.9]gm, where P is the pressure in Torr), with the average grain diameters being 0.94pm at 2Torr and 5.63pm at 200Torr. Device performance was improved as a result with the peak device efficiency being increased from 2.1% at 2Torr to 14.1% at 100Torr. The series resistance was shown to be minimised for larger grain size, owing to the reduced contribution of grain boundaries. Suggestions for the fabrication of high efficiency solar cells are given with reference to the efficiency limiting factor

    Control of grain size in sublimation-grown CdTe, and the improvement in performance of devices with systematically increased grain size

    Get PDF
    A method to control the grain size of CdTe thin films deposited by close space sublimation using chamber pressure is demonstrated. Grain diameter is shown to increase in the pressure range 2–200 Torr, following the linear relationship D (?m)=0.027×P (Torr)+0.90. A mechanism is proposed to explain the dominance of the 111 preferred orientation in the small-grained, but not the large-grained films. For a series of CdTe/CdS solar cells in which the only variable was grain size, the performance parameters were seen to increase from 0.54% (0.94 ?m grains) up to a plateau of 11.3% (?3.6 ?m grains). This corresponds to the point at which the series resistance is no longer dominated by grain boundaries, but by the contacts

    New Isozyme Systems for Maize (Zea mays L.): Aconitate Hydratase, Adenylate Kinase, NADH Dehydrogenase, and Shikimate Dehydrogenase

    Get PDF
    Electrophoretic variation and inheritance of four novel enzyme systems were studied in maize (Zea mays L.). A minimum of 10 genetic loci collectively encodes isozymes of aconitate hydratase (ACO; EC 4.2.1.3.), adenylate kinase (ADK; EC 2.7.4.3), NADH dehydrogenase (DIA; EC 1.6.99.-), and shikimate dehydrogenase (SAD; EC 1.1.1.25). At least four loci are responsible for the genetic control of ACO. Genetic data for two of the encoding loci, Aco1 and Aco4, demonstrated that at least two maize ACOs are active as monomers. Analysis of organellar preparations suggests that ACO1 and ACO4 are localized in the cytosolic and mitochondrial subcellular fractions, respectively. Maize ADK is encoded by a single nuclear locus, Adk1, governing monomeric enzymes that are located in the chloroplasts. Two cytosolic and two mitochondrial forms of DIA were electrophoretically resolved. Segregation analyses demonstrated that the two cytosolic isozymes are controlled by separate loci, Dia1 and Dia2, coding for products that are functional as monomers (DIA1) and dimers (DIA2). The major isozyme of SAD is apparently cytosolic, although an additional faintly staining plastid form may be present. Alleles at Sad1 are each associated with two bands that cosegregate in controlled crosses. Linkage analyses and crosses with B-A translocation stocks were effective in determining the map locations of six loci, including the previously described but unmapped locus Acp4. Several of these loci were localized to sparsely mapped regions of the genome. Dia2 and Acp4 were placed on the distal portion of the long arm of chromosome 1, 12.6 map units apart. Dia1 was localized to chromosome 2, 22.2 centimorgans (cM) from B1. Aco1 was mapped to chromosome 4, 6.2 cM from su1. Adk1 was placed on the poorly marked short arm of chromosome 6, 8.1 map units from rgd1. Less than 1% recombination was observed between Glu1 (on chromosome 10) and Sad1. In contrast to many other maize isozyme systems, there was little evidence of gene duplication or of parallel linkage relationships for these allozyme loci

    Duplicated Chromosome Segments in Maize (Zea mays L.): Further Evidence from Hexokinase Isozymes

    Get PDF
    The genetic control of hexokinase isozymes (ATP: d-hexose-6-phosphotransferase, E.C. 2.7.7.1, HEX) in maize (Zea mays L.) was studied by starch gel electrophoresis. Genetic analysis of a large number of inbred lines and crosses indicates that the major isozymes observed are encoded by two nuclear loci, designated Hexl and Hex2. Five active allozymes and one null variant are associated with Hexl, while Hex2 has nine active alleles in addition to a null variant. Alleles at both loci govern the presence of single bands, with no intragenic or intergenic heteromers visible, suggesting that maize HEX\u27s are active as monomers. Organelle preparations demonstrate that the products of both loci are cytosolic. All alleles, including the nulls, segregate normally in crosses. Vigorous and fertile plants were synthesized that were homozygous for null alleles at both loci, suggesting that other hexosephosphorylating enzymes exist in maize that are undetected with our assay conditions. Linkage analyses and crosses with B-A translocation stocks place Hexl on the short arm of chromosome 3, 27 centimorgans from Pgd2 (phosphogluconate dehydrogenase) and Hex2 on the long arm of chromosome 6, approximately 45 centimorgans from Pgdl. It is suggested that the parallel linkages among these two pairs of duplicated genes reflects an evolutionary history involving chromosome segment duplication or polyploidy

    The Origin of Cornbelt Maize: The Isozyme Evidence

    Get PDF
    Historical records show t hat the Midwestern dent corns of the United States originated from hybridization of two landraces, Northern Flint and Southern Dent. We examined the origin of Southern and Midwestern Dents by means of isozyme electrophoresis. Isozyme genotypes were determined for 23 loci in 12 plants each of 32 accessions of Southern Dent. Previously published isozyme data for maize landraces of Mexico and North America and for U.S. Midwestern Dents were included for comparative purposes. The data show that Northern Flint and Southern Dent are among the isozymically most divergent maize landraces. Nei’s genetic identities between populations of these two landraces are very low for conspecific populations (ca. 0.80). Southern Dent of the southeastern U.S. appears closely related to similar dent corns of southern Mexico, supporting a previously published hypothesis that U.S. Southern Dent is largely derived from the dent corns of southern Mexico. The Midwestern Dents, which resulted from crosses of Southern Dent and Northern Flint, are much more like Southern Dent than Northern Flint in their isozyme profile. Similarly, public inbreds show greater affinity to Southern Dent with the exception of sweet corn lines, which resemble Northern Flint in their isozyme allele frequencies. North American public inbreds do not contain appreciable isozymic variation beyond that found in Northern Flint and Southern Dent

    Overcoming the capital investment hurdle in worker-controlled firms

    Get PDF
    Both the academic literature and practitioners have long noted the need for an equity investment mechanism for worker-controlled firms that alleviates investor anxieties without undermining internal workplace democracy. The purpose of this paper is to outline one such possible mechanism

    Self-lensing flares from black hole binaries III: general-relativistic ray tracing of circumbinary accretion simulations

    Full text link
    Self-lensing flares (SLFs) are expected to be produced once or twice per orbit by an accreting massive black hole binary (MBHB), if the eclipsing MBHBs are observed close to edge-on. SLFs can provide valuable electromagnetic (EM) signatures to accompany the gravitational waves (GWs) detectable by the upcoming Laser Interferometer Space Antenna (LISA). EM follow-ups are crucial for, e.g., sky-localization, and constraining the Hubble constant and the graviton mass. We use high-resolution two-dimensional viscous hydrodynamical simulations of a circumbinary disk (CBD) embedding a MBHB. We then use very high-cadence output of these hydrodynamical simulation inputs for a general-relativistic ray-tracing code to produce synthetic spectra and phase-folded light curves. Our main results show a significant periodic amplification of the flux with the characteristic shape of a sharp flare with a central dip, as the foreground black hole (BH) transits across the minidisk and shadow of the background BH, respectively. These corroborate previous conclusions based on the microlensing approximation and analytical toy models of the emission geometry. We also find that at lower inclinations, without some occlusion of the minidisk emission by the CBD, shocks from quasi-periodic mass-trading between the minidisks can produce bright flares which can mimic SLFs and could hinder their identification.Comment: 14 pages, 11 figures, submitted to journal, split Fig. 1 by frequency, fixed some typo
    • …
    corecore