7,732 research outputs found
An anisotropic numerical model for thermal hydraulic analyses: application to liquid metal flow in fuel assemblies
A CFD analysis has been carried out to study the thermalâhydraulic behavior of liquid metal coolant in a fuel assembly of triangular lattice. In order to obtain fast and accurate results, the isotropic two-equation RANS approach is often used in nuclear engineering applications. A different approach is provided by Non-Linear Eddy Viscosity Models (NLEVM), which try to take into account anisotropic effects by a nonlinear formulation of the Reynolds stress tensor. This approach is very promising, as it results in a very good numerical behavior and in a potentially better fluid flow description than classical isotropic models. An Anisotropic Shear Stress Transport (ASST) model, implemented into a commercial software, has been applied in previous studies, showing very trustful results for a large variety of flows and applications. In the paper, the ASST model has been used to perform an analysis of the fluid flow inside the fuel assembly of the ALFRED lead cooled fast reactor. Then, a comparison between the results of wall-resolved conjugated heat transfer computations and the results of a decoupled analysis using a suitable thermal wall-function previously implemented into the solver has been performed and presented
Early warning system for the prevention and control of unauthorized accesses to air navigation services infrastructures
Early warning systems are fundamental instruments for the management of
critical situations since they are able to signal in advance any anomaly with
respect to ordinary situations.
The purpose of this paper is to present an early warning system, based on
artificial neural networks, for the prevention and control of unauthorized
accesses to the air navigation services infrastructure in Italy
A Data-Driven Fuzzy Approach for Predicting the Remaining Useful Life in Dynamic Failure Scenarios of a Nuclear Power Plant
This paper presents a similarity-based approach for prognostics of the Remaining Useful Life (RUL) of a system, i.e. the lifetime remaining between the present and the instance when the system can no longer perform its function. Data from failure dynamic scenarios of the system are used to create a library of reference trajectory patterns to failure. Given a failure scenario developing in the system, the remaining time before failure is predicted by comparing by fuzzy similarity analysis its evolution data to the reference trajectory patterns and aggregating their times to failure in a weighted sum which accounts for their similarity to the developing pattern. The prediction on the failure time is dynamically updated as time goes by and measurements of signals representative of the system state are collected. The approach allows for the on-line estimation of the RUL. For illustration, a case study is considered regarding the estimation of RUL in failure scenarios of the Lead Bismuth Eutectic eXperimental Accelerator Driven System (LBE-XADS
Additive effect of non-alcoholic fatty liver disease on metabolic syndrome-related endothelial dysfunction in hypertensive patients
Metabolic syndrome (MS) is characterized by an increased risk of incident diabetes and cardiovascular (CV) events, identifying insulin resistance (IR) and endothelial dysfunction as key elements. Moreover, non-alcoholic fatty liver disease (NAFLD) is bidirectionally linked with MS as a consequence of metabolic and inflammatory abnormalities. We addressed the question if the evolution in NAFLD might worsen endothelium-dependent vasodilating response in MS hypertensives. We recruited 272 Caucasian newly-diagnosed never-treated hypertensive outpatients divided into three groups according to the presence/absence of MS alone or in combination with NAFLD. MS and NAFLD were defined according to the National Cholesterol Education Program-Adult Treatment Panel III (NCEP-ATPIII) and non-invasive fatty liver index, respectively. We determined IR by using the homeostasis model assessment (HOMA) index. Vascular function, as forearm blood flow (FBF), was determined through strain-gauge plethysmography after intra-arterial infusion of acetylcholine (ACh) and sodium nitroprusside. MS+NAFLD+ group showed worse metabolic, inflammatory and vascular profiles compared with MS-NAFLD- and MS+NAFLD-. HOMA resulted in being the strongest predictor of FBF both in the MS+NAFLD- and in the MS+NAFLD+ groups, accounting for 20.5% and 33.2% of its variation, respectively. In conclusion, we demonstrated that MS+NAFLD+ hypertensives show a worse endothelium-dependent vasodilation compared with MS+NAFLD-, allowing for consideration of NAFLD as an early marker of endothelial dysfunction in hypertensives
Association between one-hour post-load plasma glucose levels and vascular stiffness in essential hypertension
Objectives: Pulse wave velocity (PWV) is a surrogate end-point for cardiovascular morbidity and mortality. A plasma glucose
value 155 mg/dl (NGT155 had a worse insulin sensitivity and higher hs-CRP than NGT,155, similar to IGT subjects. In addition, NGT 155 subjects, compared with NGT,155, have higher PWV and its hemodynamic correlates
that increase their cardiovascular risk profile
Treatment of end-of-life concrete in an innovative heating-air classification system for circular cement-based products
A stronger commitment towards Green Building and circular economy, in response to environmental concerns and economic trends, is evident in modern industrial cement and concrete production processes. The critical demand for an overall reduction in the environmental impact of the construction sector can be met through the consumption of high-grade supplementary raw materials. Advanced solutions are under development in current research activities that will be capable of up-cycling larger quantities of valuable raw materials from the fine fractions of End-of-Life (EoL) concrete waste. New technology, in particular the Heating-Air classification System (HAS), simultaneously applies a combination of heating and separation processes within a fluidized bed-like chamber under controlled temperatures (±600 °C) and treatment times (25â40 s). In that process, moisture and contaminants are removed from the EoL fine concrete aggregates (0â4 mm), yielding improved fine fractions, and ultrafine recycled concrete particles (<0.125 mm), consisting mainly of hydrated cement, thereby adding value to finer EoL concrete fractions. In this study, two types of ultrafine recycled concrete (either siliceous or limestone EoL concrete waste) are treated in a pilot HAS technology for their conversion into Supplementary Cementitious Material (SCM). The physico-chemical effect of the ultrafine recycled concrete particles and their potential use as SCM in new cement-based products is assessed by employing substitutions of up to 10% of the conventional binder. The environmental viability of their use as SCM is then evaluated in a Life Cycle Assessment (LCA). The results demonstrated accelerated hydration kinetics of the mortars that incorporated these SCMs at early ages and higher mechanical strengths at all curing ages. Optimal substitutions were established at 5%. The results suggested that the overall environmental impact could be reduced by up to 5% when employing the ultrafine recycled concrete particles as SCM in circular cement-based products, reducing greenhouse gas emissions by as much as 41 kg CO2 eq./ton of cement (i.e. 80 million tons CO2 eq./year). Finally, the environmental impacts were reduced even further by running the HAS on biofuel rather than fossil fuel.The authors of the present paper, prepared in the framework ofthe Project VEEP "Cost-Effective Recycling of C&DW in High AddedValue Energy Efficient Prefabricated Concrete Components forMassive Retrofitting of our Built Environment", wish to acknowl-edge the European Commission for its support. This project hasreceived funding from the European Unionâs Horizon 2020 researchand innovation programme under grant agreement No 723582.This paper reflects only the authorâs view and the European Com-mission is not responsible for any use that may be made of theinformation it contains.The authors are also grateful to the Spanish Ministry of Science,Innovation and Universities (MICIU) and the European RegionalDevelopment Fund (FEDER) for funding this line of research(RTI2018-097074-B-C21)
Inborn errors of thymic stromal cell development and function
As the primary site for T cell development, the thymus is responsible for the production and selection of a functional, yet self-tolerant T cell repertoire. This critically depends on thymic stromal cells, derived from the pharyngeal apparatus during embryogenesis. Thymic epithelial cells, mesenchymal and vascular elements together form the unique and highly specialised microenvironment required to support all aspects of thymopoiesis and T cell central tolerance induction. Although rare, inborn errors of thymic stromal cells constitute a clinically important group of conditions because their immunological consequences, which include autoimmune disease and T cell immunodeficiency, can be life-threatening if unrecognised and untreated. In this review, we describe the molecular and environmental aetiologies of the thymic stromal cell defects known to cause disease in humans, placing particular emphasis on those with a propensity to cause thymic hypoplasia or aplasia and consequently severe congenital immunodeficiency. We discuss the principles underpinning their diagnosis and management, including the use of novel tools to aid in their identification and strategies for curative treatment, principally transplantation of allogeneic thymus tissue
Guided wave scattering analysis around a circular delamination in a quasi-isotropic fiber-composite laminate
Carbon fiber reinforced composites are widely used in the aerospace industry, but barely visible impact damage can lead to delamination and compromise the structural integrity. The scattering of the fundamental anti-symmetric guided wave mode (A0 Lamb mode) at an artificial circular delamination in a quasi-isotropic laminate was investigated experimentally. A 5 cycle Hanning windowed wave pulse was used as the excitation signal for the experiments. Fast Fourier Transform was employed to identify the guided wave amplitude of the scattered field along various directions. The experimental wavefield was captured using a laser Doppler vibrometer. Experimental results are presented for the scattering pattern and scattering amplitude as a function of distance from the damage. The results of this study can help to improve delamination detection techniques using guided waves and to gain physical insights into the scattering of guided waves at a delamination
- âŠ