52 research outputs found
La/B 4 C multilayer mirrors with an additional wavelength suppression
In this paper, the authors report on La/B(4)C multilayer mirrors designed for an incidence angle of 45° with both maximum reflectivity at a wavelength of 6.7 nm and reflectivity suppression at a wavelength of 20.1 nm. These mirrors were deposited for the EIS-TIMER at the FERMI@Elettra Free Electron Laser. The multilayer structure and optical properties were characterized using grazing incidence X-ray reflectometry with Cu-K(α) radiation and EUV reflectometry in the spectral region of 6.5 - 21.0 nm. An anti-reflective coating designed at the wavelength of 20.1 nm had to be deposited on top of the high reflective La/B(4)C multilayer mirror optimized at a wavelength of 6.7 nm. Measured reflectivities of 53.4% at the wavelength of 6.72 nm and 0.15% at the wavelength of 20.1 nm were simultaneously achieved. It is shown that the reflectivity loss at the wavelength of 6.7 nm due to the utilization of antireflective coating designed at the wavelength of 20.1 nm can be minimized up to 1.0%
Structural and electronic properties of anisotropic ultrathin organic films from dichroic resonant soft x-ray reflectivity
We developed a quantitative approach for the determination of molecular arrangement and electronic structure in anisotropic organic ultrathin films based on the measurement of polarized reflectivity at the carbon K-edge. The reflectivity spectra were fitted to a parameterized model calculation. The method was applied to a self-assembled monolayer of 1,4-benzenedimethanethiol on gold. To simulate reflectivity, the organic anisotropic film was described by a dielectric tensor, obtained by ab initio calculations for the single molecule and suitable rotations to describe the molecular organization in film domains. Film structure was obtained though the best fit of the simulation to the experiment. Results were consistent with a monolayer-thick film composed of domains of molecules with in-plane isotropic distribution of orientations. In each domain, molecules adopted a standing configuration, with a tilt of 28° relative to the substrate normal. Information on the modification of the molecular electronic states due to chemical bonding was derived
AC/DC: The FERMI FEL Split and Delay Optical Device for Ultrafast X-ray Science
Free-electron lasers (FELs) are the most advanced class of light-sources, by virtue of their unique capability to lase high-brightness pulses characterized by wavelengths spanning the extreme-ultraviolet, the soft and hard X-ray spectral domains, as well as by temporal lengths lying in the femtosecond (fs) timescale. The next step to push the current standards in ultrafast X-ray science is strongly linked to the possibility of engineering and exploiting time-resolved experiments exclusively for FELs pulses, ideally having different colors tunable at specific electronic resonance of the chemical elements. At the seeded FERMI FEL (Trieste, Italy) this goal is committed to the optical device known as AC/DC, which stands for the auto correlator/delay creator. AC/DC is designed to double the incoming FEL pulse splitting the photon beam by inserting a grazing incidence flat mirror, thus preserving the spectral and temporal properties, and further delaying one of these two pulses in time. It can independently tune the FEL pulses fluence on the two optical paths by means of solid-state filters, too. Here, we present a detailed description about this optical device. Strong emphasis is dedicated to the AC/DC opto-mechanical design and to the laser-based feedback systems implemented to compensate for any mismatch affecting the FEL optical trajectory, ascribable to both mechanical imperfections and paraxial errors rising during a temporal delay scan
Widely tunable two-colour seeded free-electron laser source for resonant-pump resonant-probe magnetic scattering
International audienceThe advent of free-electron laser (FEL) sources delivering two synchronized pulses of different wavelengths (or colours) has made available a whole range of novel pump–probe experiments. This communication describes a major step forward using a new configuration of the FERMI FEL-seeded source to deliver two pulses with different wavelengths, each tunable independently over a broad spectral range with adjustable time delay. The FEL scheme makes use of two seed laser beams of different wavelengths and of a split radiator section to generate two extreme ultraviolet pulses from distinct portions of the same electron bunch. The tunability range of this new two-colour source meets the requirements of double-resonant FEL pump/FEL probe time-resolved studies. We demonstrate its performance in a proof-of-principle magnetic scattering experiment in Fe–Ni compounds, by tuning the FEL wavelengths to the Fe and Ni 3p resonances
Molecular orientation in soft matter thin films studied by resonant soft x-ray reflectivity
The Low Density Matter (LDM) beamline at FERMI: Optical layout and first commissioning
The Low Density Matter (LDM) beamline has been built as part of the FERMI free-electron laser (FEL) facility to serve the atomic, molecular and cluster physics community. After the commissioning phase, it received the first external users at the end of 2012. The design and characterization of the LDM photon transport system is described, detailing the optical components of the beamline
Timing methodologies and studies at the FERMI free-electron laser.
Time-resolved investigations have begun a new era of chemistry and physics, enabling the monitoring in real time of the dynamics of chemical reactions and matter. Induced transient optical absorption is a basic ultrafast electronic effect, originated by a partial depletion of the valence band, that can be triggered by exposing insulators and semiconductors to sub-picosecond extreme-ultraviolet pulses. Besides its scientific and fundamental implications, this process is very important as it is routinely applied in free-electron laser (FEL) facilities to achieve the temporal superposition between FEL and optical laser pulses with tens of femtoseconds accuracy. Here, a set of methodologies developed at the FERMI facility based on ultrafast effects in condensed materials and employed to effectively determine the FEL/laser cross correlation are presented
Photochemical Ring-Opening Reaction of 1,3-Cyclohexadiene: Identifying the True Reactive State
The photochemically induced ring-opening isomerization reaction of 1,3-cyclohexadiene to 1,3,5-hexatriene is a textbook example of a pericyclic reaction and has been amply investigated with advanced spectroscopic techniques. The main open question has been the identification of the single reactive state which drives the process. The generally accepted description of the isomerization pathway starts with a valence excitation to the lowest lying bright state, followed by a passage through a conical intersection to the lowest lying doubly excited state, and finally a branching between either the return to the ground state of the cyclic molecule or the actual ring-opening reaction leading to the open-chain isomer. Here, in a joint experimental and computational effort, we demonstrate that the evolution of the excitation–deexcitation process is much more complex than that usually described. In particular, we show that an initially high-lying electronic state smoothly decreasing in energy along the reaction path plays a key role in the ring-opening reaction
- …