Mechanism of Nickel and Chromium-Induced Immunotoxicity and Oxidative Stress: A Comparative Study

Abstract Introduction: Chromium (Cr) and Nickel (Ni) are examples of commonly used industrial substances with negative long time exposure on human health. One mechanism whereby metals can alter health is through modulation of immune homeostasis. They are capable of producing oxidative stress and it is possible that this oxidative stress contributes to the carcinogenic response of these metals

Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries

Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely

Tuning structural, electrical, linear, and nonlinear optical properties of cadmium zinc telluride quantum dot thin films

Quantum dots of Cd0.18Zn0.14Te0.68 thin films of various thicknesses are deposited on a glass substrate using inert gas condensation and characterized using many techniques. Structural analysis confirms the cubic polymorph of the thin films. The particle size increased from 5.7 to 10.35 nm as the film thickness increased from 10 to 100 nm. Bandgap calculations show two direct allowed transitions, one of which is 1.8 eV for different thicknesses. The other transition changes from the ultra-violet region (3.7 eV) for 10 nm thickness to yellow (2 eV) for 100 nm thickness, depending on the particle size. This result suggests that this material is suitable for use in multiple absorption layers of the same material rather than multilayers of different materials in tandem solar cells. The optical linear and nonlinear parameters highly depend on the particle size. Electrical conductivity shows intrinsic conduction with low activation energies from ambient temperature to 336 K

Erratum to: Study of the structural, electrical and optical properties of Ge-Pb-Te nanocrystals

This erratum corrects a mistake happened in Figure 1 in the article. In the recent version Figure 1 is incorrect, we need to exchange it with the correct figure attached with this erratum

Study of the structural, electrical and optical properties of Ge-Pb-Te nanocrystals

Nanocrystals of Pb37.5Ge12.5Te50 with average size 24 nm are prepared using direct solid state reactions of pure elements in vacuum. The obtained Pb37.5Ge12.5Te50 nanocrystal alloy was used as a starting material for preparing thin films by inert gas condensation (IGC) technique. The obtained thin films show a nanocrystalline structure. Particle size of thin film increases from 4.3 to 6.9 nm with increasing film thickness from 10 to 60 nm. Optical studies for thin films revealed a direct allowed electronic transition. The values of optical band gap Eopg decreased from 2.26 to 1.63 eV with increasing film thickness from 10 to 60 nm and inversely proportional to particle size. The electrical conductivity of nanocrystalline thin films was enhanced by a factor of 1000 times with increasing film thickness from 10 to 60 nm. The reduction of electrical conductivity during cooling cycle for 46 and 60 nm film thicknesses can be explained by the so-called core-shell model. The growth of crystal during heating process causes an increase in thin film resistance during cooling which reduces the probability of the presence of current paths within thin film

Influence of Film Thickness and Heat Treatment on the Physical Properties of Mn Doped Sb2Se3 Nanocrystalline Thin Films

Nanocrystalline thin films of Sb37.07Mn1.95Se60.98 with different thickness (7, 20, 40, and 80 nm) were successfully prepared via inert gas condensation technique. As-deposited films showed amorphous structure by grazing incident in-plane X-ray diffraction (GIIXD) technique. All films of different thicknesses were heat treated at 433 K for 90 min. The GIIXD pattern of annealed films showed nanocrystalline orthorhombic structure. The effect of thickness of annealed films on the structure and optical properties was studied. Calculated particle sizes are 20.67 and 24.15 for 40 and 80 nm thickness of heat treated film. High resolution transmission electron microscope HRTEM images and their diffraction patterns proved that 40 nm film thickness annealed at different temperature has nanocrystalline nature with observed (high) crystallinity that increases with annealing temperature. Blue shift of optical energy gap was observed from 1.68 to 2 eV with decreasing film thickness from 80 to 7 nm. Film thickness of 40 nm was exposed to different heat treated temperatures from 353 to 473 K to detect its effect on structure and optical and electrical properties. Blue shift from 1.73 to 1.9 eV was observed in its optical band gap due to direct transition as heat treatment temperature decreasing from 473 to 353 K. Electrical conductivity was studied for different heat treated films of thickness 40 nm, and intrinsic conduction mechanism is dominant. The activation energy Ea was affected by heat treatment process

Tuning Paramagnetic effect of Co-Doped CdS diluted magnetic semiconductor quantum dots

Diluted magnetic semiconductor quantum dots (DMS-QDs) are known for their outstanding optical and magnetic properties. II–VI DMS-QDs, in particular, are interesting for spintronics, nonvolatile memory, and magneto-optical devices. Therefore, studying the optical and magnetic properties of different II-VI semiconductors doped with transition metal atoms is of great importance. Tuning II-VI QDs optical properties can be mastered by changing the QDs particle size and/or structure. However tuning the magnetic properties of DMS-QDs is still within trial and error verification, although it is crucial in targeting different applications in spintronics. We hereby demonstrate, the ability to tune the paramagnetic effect of homogeneous Co-doped CdS QDs following a co-precipitation synthesis route with different Co2+ concentrations. The structural, optical and magnetic properties have been comprehensively studied. The dopant cobalt atoms concentration and chemical-configuration were precisely tracked by x-ray photoemission spectroscopy. Excitingly, the different Co-concentrations of 2, 5 and 10% significantly improve the magnetic properties of the CdS QDs, which exhibit a paramagnetic concentration-dependent effect. With 10% of Co atoms, we were able to achieve ~ 200 x 10(-6) molar susceptibility, that is, the same value to that of pure CoS. Thus we could obtain the highest possible paramagnetic effect in the CdS semiconducting matrix exhibiting 2.76 eV band gap, i.e. in the visible range. This efficacious result encourages the use of the present method in preparing DMS-QDs materials targeting various spintronics applications.AE and IM are acknowledging the funding provided by the joint Russian Egyptian STDF project no. 13756. AE is also grateful also for the general administration of Missions at the Ministry of High Education in Egypt for funding the mission trip to Centro de Fisica de Materiales on 2016. CR and EO are grateful for funding from the Spanish Ministry of Economy and Competitiveness (grant MAT2016-78293-C6-5-R, including FEDER funds), the Basque Government (grant IT-1255-19) and the Interreg POCTEFA V-A Spain–France–Andorra Program (EFA 194/16/TNSI) partly financed by ERDF funds.Peer reviewe

A study of the structural, optical, and ferroelectric characteristics of Pb-Ge-Te nanocrystalline alloys as potential candidates for memory devices and Near-Infrared (NIR) applications

Pb50-xGexTe50 (x = 15, 20, 25, 30 at. %) nanocrystalline bulk alloys were prepared using solid-state direct reaction. X-ray diffraction and high-resolution transmission electron microscopy (HR-TEM) analysis of the reference structure (Ge = 15 at.%) revealed a slightly distorted cubic structure, with a lattice parameter of 6.43 Å and an inter-axis unit cell angle of 88.69°. Atomic force images\u27 analysis and histograms displayed a homogenous particle size distribution in the nanoscale for all samples. Density measurements showed a gradual decrease from 7.89 to 6.98 g/cm3 with increasing Ge content in agreement with the calculated values. The polarization–field hysteresis behavior verifies the ferroelectric activity of the prepared alloys, suggesting them as potential candidates for non-volatile ferroelectric memory devices (NVFRAMs) applications. Optical properties analyzed using diffuse reflectance measurements exhibited direct transitions with a bandgap decreasing from 1.57 to 1.35 eV with increasing Ge content matching the near-infrared spectrum (NIR) perfectly

Biomimetic Mineralization of Tooth Enamel Using Nanocrystalline Hydroxyapatite under Various Dental Surface Pretreatment Conditions

In this report, we demonstrated the formation of a biomimetic mineralizing layer obtained on the surface of dental enamel (biotemplate) using bioinspired nanocrystalline carbonate-substituted calcium hydroxyapatite (ncHAp), whose physical and chemical properties are closest to the natural apatite dental matrix, together with a complex of polyfunctional organic and polar amino acids. Using a set of structural, spectroscopy, and advanced microscopy techniques, we confirmed the formation of a nanosized ncHAp-based mineralized layer, as well as studying its chemical, substructural, and morphological features by means of various methods for the pretreatment of dental enamel. The pretreatment of a biotemplate in an alkaline solution of Ca(OH)2 and an amino acid booster, together with the executed subsequent mineralization with ncHAp, led to the formation of a mineralized layer with homogeneous micromorphology and the preferential orientation of the ncHAp nanocrystals. It was shown that the homogeneous crystallization of hydroxyapatite on the biotemplate surface and binding of individual nanocrystals and agglomerates into a single complex by an amino acid booster resulted in an increase (~15%) in the nanohardness value in the enamel rods area, compared to that of healthy natural enamel. Obtaining a similar hierarchy and cleavage characteristics as natural enamel in the mineralized layer, taking into account the micromorphological features of dental tissue, is an urgent problem for future research