Effect of Superheated Steam Treatment on Changes in Moisture Content and Colour Properties of Coconut Slices

Drying is one of the methods to preserve the quality and prolong the shelf life of food. Coconut meat was sliced and dried using superheated steam oven at 140°C, 160°C and 180°C. Drying was carried out at different drying time (5, 10, 15, 20, 25 and 30 minutes). The effect of drying temperature and time on the moisture content and colour properties (L, a, b and BI) of the coconut slices were studied. The temperature and time significantly (p < 0.05) affected the moisture loss and colour values of coconut slices during superheated steam drying. The moisture content decreased with increased drying temperature and time. The values of L decreased with drying temperature and time. The a and b value of coconut slice dried at 140°C decreased initially then increased with time. Coconut slices dried at 160°C had their a values increased up to 20 minutes then decreased and b values increased up to 20 minutes then fluctuated. The a and b values of coconut slices dried at 180°C showed fluctuation. BI values of coconut slices increased with increasing drying time and temperature

The Effects of Leaf Hydration on Light Reflectance in Salvia leucophylla and S. mellifera

The presence of trichomes on a plant affect the plant’s ability to retain water; this, in turn, must affect light propagation and reflectance. It was hypothesized that a plant with a higher trichome density (Salvia leucophylla) would have a greater change in reflectance when exposed to a more aired or hydrated environment than a species with a lower trichome density (S. mellifera). Results obtained using a Unispec suggest that Salvia mellifera is more resistant to change in NDVI in response to drying and wetting. Water potential data suggest this may be related to the plant’s resistance to actual drying and wetting in the first place

Reduction in apathy following epilepsy surgery

Introduction: Surgical treatment for patients with epilepsy who do not respond to antiepileptic medication can lead to changes in behavior, including new onset of neuropsychiatric symptoms such as depression and anxiety. In other cases, neuropsychiatric symptoms present before surgery may be alleviated. Because application of diagnostic criteria for primary psychiatric disorders may not be valid in assessing behavior in epilepsy populations, we sought to determine the feasibility of measuring behaviors associated with frontal-subcortical dysfunction using the Frontal Systems Behavior Scale (FrSBe) in patients who had received surgical intervention for medically refractory epilepsy. Materials and Methods: Twenty-three patients who had previously undergone epilepsy surgery and their family member informants completed the FrSBe. The FrSBe includes separate forms for patients and informants to rate symptoms associated with three frontal lobe syndromes - executive dysfunction, disinhibition, and apathy - prior to and following a neurological condition. Patients and informants were asked to rate frontal lobe behaviors before and after epilepsy surgery using the FrSBe. Results: Informants rated patients as showing a significantly greater reduction in apathy on the FrSBe compared to either disinhibition or executive dysfunction subscales. A trend in reduction of apathy following right hemisphere resection was found. Conclusions: Patients who have undergone epilepsy surgery show a reduction in apathy but it is unclear whether this behavioral change is directly related to the surgical intervention. We suggest that these preliminary findings support the utility of implementing dimensional scales such as the FrSBe to study behavioral changes following epilepsy surgery

Relative persistence of AAV serotype 1 vector genomes in dystrophic muscle

The purpose of this study was to assess the behavior of pseudotyped recombinant adeno-associated virus type 1 (rAAV2/1) vector genomes in dystrophic skeletal muscle. A comparison was made between a therapeutic vector and a reporter vector by injecting the hindlimb in a mouse model of Limb Girdle Muscular Dystrophy Type 2D (LGMD-2D) prior to disease onset. We hypothesized that the therapeutic vector would establish long-term persistence through prevention of myofiber turnover. In contrast, the reporter vector genome copy number would diminish over time due to disease-associated muscle degradation

Ambulatory Blood Pressure Monitoring in a Cohort of Children Referred with Suspected Hypertension: Characteristics of Children with and without Attention Deficit Hyperactivity Disorder

Childhood hypertension’s increasing prevalence has generally been linked to the obesity epidemic. We observed that a significant proportion of children referred to our pediatric center with documented office hypertension are nonobese and have a history of attention deficit hyperactivity disorder (ADHD). To define the extent of this anecdotal observation, we performed a retrospective analysis of ambulatory blood pressure monitoring (ABPM) tests which in our center are routinely performed in newly referred children suspected of hypertension. Twenty-one percent (48 of 227 new referrals) had a history of ADHD, and 81% of them were treated with psychostimulant medications at the time of their ABPM test. Children in this group had a significantly lower average BMI z-score compared with the rest of the children (0.18 versus 0.75) and were significantly more likely to have abnormally elevated wake systolic loads on ABPM (38% versus 4%). The overall proportion of children with any abnormality on ABPM was comparable in both groups (46% versus 40%). Conclusion. A significant proportion of children suspected of hypertension have ADHD which may be related to higher wake systolic BP values. The prevalence of hypertension among children with ADHD will have to be determined in prospective studies

High-k Dielectric Thickness and Halo Implant on Threshold Voltage Control

High-k dielectric oxides have been used to replace the widely used silicon dioxide (SiO2) gate dielectrics to overcome physical limits of transistor scaling. The thickness of high-k gate dielectric influences the threshold voltage (VTH) and off-state leakage current (IOFF). A device with high drive current (ION) and low IOFF gives a high on-off current ratio (ION/IOFF), which leads to a faster switching speed for the Ntype Metal Oxide Semiconductor Field Effect Transistor (NMOS). In order to achieve the best ION/IOFF ratio for a predetermined range of VTH, halo implant was used to adjust the threshold voltage. The finding shows that optimum VTH and ION/IOFF ratio can be achieved by selecting the most suitable halo implant dose in a virtually fabricated 14nm gate-length La2O3-based NMOS device with varying high-k dielectric oxide thickness

Tel Aviv Mizrah: The potential of Iraqi cultural identity within two generations

Before immigrating to Israel, first-generation Iraqi Jews were deeply attached to their identity as Mizrahi Jews. Their mother tongue was Arabic and they had grown up in an oriental environment. Therefore, it was not easy for them to adopt the Euro-Israeli identity that the dominant Ashkenazi-European stratum in Israel compelled them to accept. Despite strong Westernizing tendencies in Israeli society, the first generation of Iraqi Jewish immigrants maintained strong links to the Iraqi customs and traditions they had acquired in Iraq, particularly with regard to the musical folklore and oriental cuisine. On the other hand, second-generation Iraqi Jews were more familiar with Israeli society than their parents; they grew up in Israel and learned Hebrew in Israeli schools along with Ashkenazi Jews and other ethnic groups. This paper establishes connections between the historical realities of Iraqi Jewish immigrants and the literary representation of their world in the trilogy Tel-Aviv Mizrah (Tel Aviv East) written in 2003 by the Iraqi Jewish author Shimon Ballas, through a comparison of Ballas's literary vision with the historical realities of Iraqi Jewish identity in Israel over the course of two generations

Design of a pulse power supply unit for micro-ECM

Electrochemical micro-machining (μECM) requires a particular pulse power supply unit (PSU) to be developed in order to achieve desired machining performance. This paper summarises the development of a pulse PSU meeting the requirements of μECM. The pulse power supply provides tens of nanosecond pulse duration, positive and negative bias voltages and a polarity switching functionality. It fulfils the needs for tool preparation with reversed pulsed ECM on the machine. Moreover, the PSU is equipped with an ultrafast overcurrent protection which prevents the tool electrode from being damaged in case of short circuits. The developed pulse PSU was used to fabricate micro-tools out of 170 μm WC-Co alloy shafts via micro-electrochemical turning and drill deep holes via μECM in a disk made of 18NiCr6. The electrolyte used for both processes was a mixture of sulphuric acid and NaNO3 aqueous solutions.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMP-ICT-FoF-285614