27 research outputs found
Cloud detection based on high resolution stereo pairs of the geostationary meteosat images
Due to the considerable impact of clouds on the energy balance in the atmosphere and on the earth surface, they are of great importance for various applications in meteorology or remote sensing. An important aspect of the cloud research studies is the detection of cloudy pixels from the processing of satellite images. In this research, we investigated a stereographic method on a new set of Meteosat images, namely the combination of the high resolution visible (HRV) channel of the Meteosat-8 Indian Ocean Data Coverage (IODC) as a stereo pair with the HRV channel of the Meteosat Second Generation (MSG) Meteosat-10 image at 0° E. In addition, an approach based on the outputs from stereo analysis was proposed to detect cloudy pixels. This approach is introduced with a 2D-scatterplot based on the parallax value and the minimum intersection distance. The mentioned scatterplot was applied to determine/detect cloudy pixels in various image subsets with different amounts of cloud cover. Apart from the general advantage of the applied stereography method, which only depends on geometric relationships, the cloud detection results are also improved because: (1) The stereo pair is the HRV bands of the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) sensor, with the highest spatial resolution available from the Meteosat geostationary platform; and (2) the time difference between the image pairs is nearly 5 s, which improves the matching results and also decreases the effect of cloud movements. In order to prove this improvement, the results of this stereo-based approach were compared with three different reflectance-based target detection techniques, including the adaptive coherent estimator (ACE), constrained energy minimization (CEM), and matched filter (MF). The comparison of the receiver operating characteristics (ROC) detection curves and the area under these curves (AUC) showed better detection results with the proposed method. The AUC value was 0.79, 0.90, 0.90, and 0.93 respectively for ACE, CEM, MF, and the proposed stereo-based detection approach. The results of this research shall enable a more realistic modelling of down-welling solar irradiance in the future
Investigation of the phase bias in the short term interferograms
Interferometric Synthetic Aperture Radar (InSAR) is a powerful tool for monitoring ground deformation associated with earthquakes, volcanoes, landslides, and different anthropogenic activities. The accuracy of the estimated deformation depends on a number of
parameters including tropospheric and ionospheric delays, unwrapping errors, phase decorrelation due to changes in scattering behavior and system noise.
However, recently an additional source of phase noise has been identified [1], which is strongest in short-interval multi-looked interferograms and, unlike other sources of noise, leads to biased, non-zero loop closure phases. This is problematic for time-series analysis because short-interval interferograms may be the only
ones that maintain coherence for some areas. In this study, we explore the characteristics of this phenomenon and propose a mitigation strategy
Analysis of radarsat-2 polarimetric data for forest mapping
Bibliography: p. 123-140Forests are a major natural resource of the Earth and control a wide range of environÂmental processes. Forests comprise a major part of the planet's plant biodiversity and have an important role in the global hydrological and biochemical cycles. Among the numerous potential applications of remote sensing in forestry, forest mapping plays a vital role for characterization of the forest in terms of species. Particularly, in Canada where forests occupy 45% of the territory, representing more than 400 million hectares of the total Canadian continental area. In this thesis, the potential of polarimetric SAR (PolSAR) Radarsat-2 data for forest mapping is investigated.
This thesis has two principle objectives. First is to propose algorithms for anaÂlyzing the PolSAR image data for forest mapping. There are a wide range of SAR parameters that can be derived fom PolSAR data. In order to make full use of the
discriminative power offered by all these parameters, two categories of methods are proposed. The methods are based on the concept of feature selection and classifier enÂsemble. First, a nonparametric definition of the evaluation function is proposed and
hence the methods NFS and CBFS. Second, a fast wrapper algorithm is proposed
for the evaluation function in feature selection and hence the methods FWFS and
FWCBFS. Finally, to incorporate the neighboring pixels information in classification
an extension of the FWCBFS method i.e. CCBFS is proposed. The second objective of this thesis is to provide a comparison between leaf-on (summer) and leaf-off (fall)
season images for forest mapping. Two Radarsat-2 images acquired in fine quadÂ
polarized mode were chosen for this study. The images were collected in leaf-on and
leaf-of seasons. We also test the hypothesis whether combining the SAR parameters
obtained fom both images can provide better results than either individual datasets may be useful for forest mapping.
To assess the potential of the proposed methods their performance have been compared with each other and with the baseline classifiers. The baseline methods
include the Wishart classifier, which is a commonly used classification method in PolSAR community, as well as an SVM classifier with the full set of parameters.
f
Experimental results showed a better performance of the leaf-of image compared
to that of leaf-on image for forest mapping. It is also shown that combining leafÂ
off parameters with leaf-on parameters can significantly improve the classification accuracy. Also, the classification results (in terms of the overall accuracy) compared
to the baseline classifiers demonstrate the effectiveness of the proposed nonparametric
scheme for forest mapping
Forest Height Retrieval Based on the Dual PolInSAR Images
A new algorithm for forest height estimation based on dual polarimetric interferometric SAR data is presented in this study. The main objective is to consider the efficiency of the dual-polarization data compared to the full polarimetric images with respect to forest height retrieval. Accordingly, the forest height estimation based on the random volume over the ground model is examined using a geometrical procedure named the three-stage method. An exhaustive search polarization optimization technique is also applied to improve the results by employing the efficiency of all the polarization bases based on the four-dimensional lexicographic PolInSAR vector. The repeat-pass experimental SAR (ESAR) images, which include both L- and P-band full polarimetric data, are employed for the accuracy assessment of the dual PolInSAR data and the newly proposed method for forest height estimation. The experimental results on the L-band PolInSAR data show the ability of the dual PolInSAR data for forest height estimation with an average root mean square error (RMSE) of 4.97 m against Lidar data based on the conventional three-stage method. Additionally, the proposed method results in an accuracy of 2.95 m for forest height estimation, indicating its high potential for tree height retrieval
Forest Height Retrieval Based on the Dual PolInSAR Images
A new algorithm for forest height estimation based on dual polarimetric interferometric SAR data is presented in this study. The main objective is to consider the efficiency of the dual-polarization data compared to the full polarimetric images with respect to forest height retrieval. Accordingly, the forest height estimation based on the random volume over the ground model is examined using a geometrical procedure named the three-stage method. An exhaustive search polarization optimization technique is also applied to improve the results by employing the efficiency of all the polarization bases based on the four-dimensional lexicographic PolInSAR vector. The repeat-pass experimental SAR (ESAR) images, which include both L- and P-band full polarimetric data, are employed for the accuracy assessment of the dual PolInSAR data and the newly proposed method for forest height estimation. The experimental results on the L-band PolInSAR data show the ability of the dual PolInSAR data for forest height estimation with an average root mean square error (RMSE) of 4.97 m against Lidar data based on the conventional three-stage method. Additionally, the proposed method results in an accuracy of 2.95 m for forest height estimation, indicating its high potential for tree height retrieval
Pol-InSAR for Forest Biomass Estimation with the Transformation of the Polarization Basis
(IF 0.87 [2018]; Q3)International audienceAn improved method that uses polarimetric and Pol-InSAR information at the L-band and P-band was proposed in this study for estimating forest biomass. In the first phase, various polarimetric and polarimetric interferometry indicators were extracted via transformation of the polarization basis. In the second phase, the particle swarm optimization method is applied to identify optimal parameter values for biomass estimation. According to the results, the correlations between the polarimetric indicators and the biomass were stronger at the P-band compared to the L-band. Polarimetric indicators that involve HV and HH–VV show the maximum correlation with biomass prior to optimization. It is demonstrated that changing the polarization basis can significantly improve the correlations of estimators with the biomass, especially at the P-band. The globally optimal estimators involve the same scattering mechanisms (volume and double-bounce scattering), and the optimal polarization bases differ slightly among most of the cases, due to the adaptation to the forest natural geometry and/or the acquisition configuration. Regarding Pol-InSAR, several tree height retrieval estimators that are based on various assumptions have been analyzed under multiple polarization basis rotations. According to the results, the RVoG phase method, which represents the forest as a low-extinction structured volume, yielded the best accuracy, with R = 0.73 and RMSE = 4.30 m. The identification of the optimum polarization indicators via binary PSO could improve the biomass estimation accuracy by 2% and 6% at the P-band and L-band, respectively. It is demonstrated that such an approach can be employed to accurately estimate biomass via extrapolation of in situ measurements over an entire region
Four-Stage Inversion Algorithm for Forest Height Estimation Using Repeat Pass Polarimetric SAR Interferometry Data
This paper proposes a new method for forest height estimation using single-baseline single frequency polarimetric synthetic aperture radar interferometry (PolInSAR) data. The new algorithm estimates the forest height based on the random volume over the ground with a volume temporal decorrelation (RVoG+VTD) model. We approach the problem using a four-stage geometrical method without the need for any prior information. In order to decrease the number of unknown parameters in the RVoG+VTD model, the mean extinction coefficient is estimated in an independent procedure. In this respect, the suggested algorithm estimates the mean extinction coefficient as a function of a geometrical index based on the signal penetration in the volume layer. As a result, the proposed four-stage algorithm can be used for forest height estimation using the repeat pass PolInSAR data, affected by temporal decorrelation, without the need for any auxiliary data. The suggested algorithm was applied to the PolInSAR data of the European Space Agency (ESA), BioSAR 2007 campaign. For the performance analysis of the proposed approach, repeat pass experimental SAR (ESAR) L-band data, acquired over the Remningstorp test site in Southern Sweden, is employed. The experimental result shows that the four-stage method estimates the volume height with an average root mean square error (RMSE) of 2.47 m against LiDAR heights. It presents a significant improvement of forest height accuracy, i.e., 5.42 m, compared to the three-stage method result, which ignores the temporal decorrelation effect
Improving estimation accuracy of growing stock by multi-frequency SAR and multi-spectral data over Iran's heterogeneously-structured broadleaf Hyrcanian forests
Via providing various ecosystem services, the old-growth Hyrcanian forests play a crucial role in the environment and anthropogenic aspects of Iran and beyond. The amount of growing stock volume (GSV) is a forest biophysical parameter with great importance in issues like economy, environmental protection, and adaptation to climate change. Thus, accurate and unbiased estimation of GSV is also crucial to be pursued across the Hyrcanian. Our goal was to investigate the potential of ALOS-2 and Sentinel-1's polarimetric features in combination with Sentinel-2 multi-spectral features for the GSV estimation in a portion of heterogeneously-structured and mountainous Hyrcanian forests. We used five different kernels by the support vector regression (nu-SVR) for the GSV estimation. Because each kernel differently models the parameters, we separately selected features for each kernel by a binary genetic algorithm (GA). We simultaneously optimized R and RMSE in a suggested GA fitness function. We calculated R, RMSE to evaluate the models. We additionally calculated the standard deviation of validation metrics to estimate the model's stability. Also for models over-fitting or under-fitting analysis, we used mean difference (MD) index. The results suggested the use of polynomial kernel as the final model. Despite multiple methodical challenges raised from the composition and structure of the study site, we conclude that the combined use of polarimetric features (both dual and full) with spectral bands and indices can improve the GSV estimation over mixed broadleaf forests. This was partially supported by the use of proposed evaluation criterion within the GA, which helped to avoid the curse of dimensionality for the applied SVR and lowest over estimation or under estimation
Analysis of the Deformation Behavior and Sinkhole Risk in Kerdabad, Iran Using the PS-InSAR Method
The unexpected collapse of land surface due to subsidence is one of the most significant geohazards that threatens human life and infrastructure. Kabudrahang and Famenin are two Iranian plains experiencing several sinkholes due to the characteristics of the underground soil layers and extreme groundwater depletion. In this study, space-based Synthetic Aperture Radar images are used to investigate the ground displacement behavior to examine the feasibility of Sentinel-1 data in detecting precursory deformation proceeding before the sinkhole formation. The selected sinkhole occurred in August 2018 in the vicinity of Kerdabad village in Hamedan province with a 40 m diameter and depth of ~40 m. Time series of the European constellation Sentinel-1 data, spanning from January 2015 to August 2018, is analyzed, and the results revealed a 3 cm annual subsidence (–3 cm/year) along with the line-of-sight direction. Time-series analysis demonstrated that the driving mechanism of the sinkhole formation had a gradual process. Displacement of persistent scatterers (PSs) near the cave area had an acceleration by approaching the sinkhole formation date. In contrast, other areas that are far from the cave area show linear subsidence behavior over time. Additionally, the one-kilometer deformation profile over the cave area indicates a high subsidence rate precisely at the location where the sinkhole was formed later on 20 August 2018