269 research outputs found
Heterogeneous bubble nucleation dynamics
Heterogeneous nucleation is the most effective mechanism for the inception of phase transformation. Solid walls and impurities act as a catalyst for the formation of a new thermodynamic phase by reducing the activation energy required for a phase change, hence enhancing nucleation. The formation of vapour bubbles close to solid, ideally flat, walls is addressed here by exploiting a mesoscale description that couples diffuse interface modelling of the two-phase vapour-liquid system with fluctuating hydrodynamics, extending previous work by the authors on homogeneous nucleation. The technical focus of this work is to directly account for hydrophobic or hydrophilic walls through appropriate boundary conditions compliant with the fluctuation-dissipation balance, a crucial point in the context of fluctuating hydrodynamics theory. This methodology provides access to the complete dynamics of the nucleation process, from the inception of multiple bubbles up to their long-Time macroscopic expansion, on time and spatial scales unaffordable by standard techniques for nucleation, such as molecular dynamics. The analysis mainly focuses on the effect of wall wettability on the nucleation rate, and, albeit qualitatively in agreement with classical nucleation theory predictions, it reveals several discrepancies to be ascribed to layering effects in the liquid close to the boundary and to bubble-bubble interactions. In particular, it is found that, close to moderately hydrophilic surfaces, the most probable nucleation events occur away from the wall through a homogeneous mechanism
A positivity-preserving scheme for fluctuating hydrodynamics
A finite-difference hybrid numerical method for the solution of the isothermal fluctuating hydrodynamic equations is proposed. The primary focus is to ensure the positivity-preserving property of the numerical scheme, which is critical for its functionality and reliability especially when simulating fluctuating vapour systems. Both cases of single- and two-phase flows are considered by exploiting the van der Waals' square-gradient approximation to model the fluid (often referred to as âdiffuse-interfaceâ model). The accuracy and robustness of the proposed scheme is verified against several benchmark theoretical predictions for the statistical properties of density, velocity fluctuations and liquid-vapour interface, including the static structure factor of the density field and the spectrum of the capillary waves excited by thermal fluctuations at interface. Finally, the hybrid scheme is applied to the challenging bubble nucleation process, and is shown to capture the salient features of the phenomenon, namely nucleation rate and subsequent bubble-growth dynamics
State of the art and perspectives on the use of planktonic communities as indicators of environmental status in relation to the EU Marine Strategy Framework Directive
Drop motion induced by vertical vibrations
We have studied the motion of liquid drops on an inclined plate subject to vertical vibrations. The liquids comprised distilled water and different aqueous solutions of glycerol, ethanol and isopropanol spanning the range 1â39 mm2 sâ1 in kinematic viscosities and 40â72 mN mâ1 in surface tension. At sufficiently low oscillating amplitudes, the drops are always pinned to the surface. Vibrating the plate above a certain amplitude yields sliding of the drop. Further increasing the oscillating amplitude drives
the drop upward against gravity. In the case of the most hydrophilic aqueous solutions, this motion is not observed and the drop only slides downward. Images taken with a fast camera show that the drop profile evolves in a different way during sliding and climbing. In particular, the climbing drop experiences a much bigger variation in its profile during an oscillating period. Complementary numerical simulations of 2D drops based on a diffuse interface approach confirm the experimental findings. The overall qualitative behavior is reproduced suggesting that the contact line pinning due to contact angle hysteresis is not necessary to explain the drop climbing
State of the art and perspectives on the use of planktonic communities as indicators of environmental status in relation to the EU Marine Strategy FD
A narrow band neutrino beam with high precision flux measurements
The ENUBET facility is a proposed narrow band neutrino beam where lepton
production is monitored at single particle level in the instrumented decay
tunnel. This facility addresses simultaneously the two most important
challenges for the next generation of cross section experiments: a superior
control of the flux and flavor composition at source and a high level of
tunability and precision in the selection of the energy of the outcoming
neutrinos. We report here the latest results in the development and test of the
instrumentation for the decay tunnel. Special emphasis is given to irradiation
tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the
first application of polysiloxane-based scintillators in high energy physics.Comment: Poster presented at NuPhys2017 (London, 20-22 December 2017). 5
pages, 2 figure
The ENUBET Beamline
The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam
where lepton production can be monitored at single particle level in an
instrumented decay tunnel. This would allow to measure and
cross sections with a precision improved by about one order of
magnitude compared to present results. In this proceeding we describe a first
realistic design of the hadron beamline based on a dipole coupled to a pair of
quadrupole triplets along with the optimisation guidelines and the results of a
simulation based on G4beamline. A static focusing design, though less efficient
than a horn-based solution, results several times more efficient than
originally expected. It works with slow proton extractions reducing drastically
pile-up effects in the decay tunnel and it paves the way towards a time-tagged
neutrino beam. On the other hand a horn-based transferline would ensure higher
yields at the tunnel entrance. The first studies conducted at CERN to implement
the synchronization between a few ms proton extraction and a horn pulse of 2-10
ms are also described.Comment: Poster presented at NuPhys2018 (London 19-21 December 2018). 4 pages,
3 figure
First Results from the TOTEM Experiment
The first physics results from the TOTEM experiment are here reported,
concerning the measurements of the total, differential elastic, elastic and
inelastic pp cross-section at the LHC energy of = 7 TeV, obtained
using the luminosity measurement from CMS. A preliminary measurement of the
forward charged particle distribution is also shown.Comment: Conference Proceeding. MPI@LHC 2010: 2nd International Workshop on
Multiple Partonic Interactions at the LHC. Glasgow (UK), 29th of November to
the 3rd of December 201
- âŠ