Walk-through flat panel total-body PET: a patient-centered design for high throughput imaging at lower cost using DOI-capable high-resolution monolithic detectors.

PURPOSE Long axial field-of-view (LAFOV) systems have a much higher sensitivity than standard axial field-of-view (SAFOV) PET systems for imaging the torso or full body, which allows faster and/or lower dose imaging. Despite its very high sensitivity, current total-body PET (TB-PET) throughput is limited by patient handling (positioning on the bed) and often a shortage of available personnel. This factor, combined with high system costs, makes it hard to justify the implementation of these systems for many academic and nearly all routine nuclear medicine departments. We, therefore, propose a novel, cost-effective, dual flat panel TB-PET system for patients in upright standing positions to avoid the time-consuming positioning on a PET-CT table; the walk-through (WT) TB-PET. We describe a patient-centered, flat panel PET design that offers very efficient patient throughput and uses monolithic detectors (with BGO or LYSO) with depth-of-interaction (DOI) capabilities and high intrinsic spatial resolution. We compare system sensitivity, component costs, and patient throughput of the proposed WT-TB-PET to a SAFOV (= 26 cm) and a LAFOV (= 106 cm) LSO PET systems. METHODS Patient width, height (= top head to start of thighs) and depth (= distance from the bed to front of patient) were derived from 40 randomly selected PET-CT scans to define the design dimensions of the WT-TB-PET. We compare this new PET system to the commercially available Siemens Biograph Vision 600 (SAFOV) and Siemens Quadra (LAFOV) PET-CT in terms of component costs, system sensitivity, and patient throughput. System cost comparison was based on estimating the cost of the two main components in the PET system (Silicon Photomultipliers (SiPMs) and scintillators). Sensitivity values were determined using Gate Monte Carlo simulations. Patient throughput times (including CT and scout scan, patient positioning on bed and transfer) were recorded for 1 day on a Siemens Vision 600 PET. These timing values were then used to estimate the expected patient throughput (assuming an equal patient radiotracer injected activity to patients and considering differences in system sensitivity and time-of-flight information) for WT-TB-PET, SAFOV and LAFOV PET. RESULTS The WT-TB-PET is composed of two flat panels; each is 70 cm wide and 106 cm high, with a 50-cm gap between both panels. These design dimensions were justified by the patient sizes measured from the 40 random PET-CT scans. Each panel consists of 14 × 20 monolithic BGO detector blocks that are 50 × 50 × 16 mm in size and are coupled to a readout with 6 × 6 mm SiPMs arrays. For the WT-TB-PET, the detector surface is reduced by a factor of 1.9 and the scintillator volume by a factor of 2.2 compared to LAFOV PET systems, while demonstrating comparable sensitivity and much better uniform spatial resolution (< 2 mm in all directions over the FOV). The estimated component cost for the WT-TB-PET is 3.3 × lower than that of a 106 cm LAFOV system and only 20% higher than the PET component costs of a SAFOV. The estimated maximum number of patients scanned on a standard 8-h working day increases from 28 (for SAFOV) to 53-60 (for LAFOV in limited/full acceptance) to 87 (for the WT-TB-PET). By scanning faster (more patients), the amount of ordered activity per patient can be reduced drastically: the WT-TB-PET requires 66% less ordered activity per patient than a SAFOV. CONCLUSIONS We propose a monolithic BGO or LYSO-based WT-TB-PET system with DOI measurements that departs from the classical patient positioning on a table and allows patients to stand upright between two flat panels. The WT-TB-PET system provides a solution to achieve a much lower cost TB-PET approaching the cost of a SAFOV system. High patient throughput is increased by fast patient positioning between two vertical flat panel detectors of high sensitivity. High spatial resolution (< 2 mm) uniform over the FOV is obtained by using DOI-capable monolithic scintillators

Intravenous morphine versus intravenous paracetamol after cardiac surgery in neonates and infants

Background: Morphine is worldwide the analgesic of first choice after cardiac surgery in children. Morphine has unwanted hemodynamic and respiratory side effects. Therefore, post-cardiac surgery patients may potentially benefit from a non-opioid drug for pain relief. A previous study has shown that intravenous (IV) paracetamol is effective and opioid-sparing in children after major non-cardiac surgery. The aim of the study is to test the hypothesis that intermittent IV paracetamol administration in children after cardiac surgery will result in a reduction of at least 30% of the cumulative morphine requirement. Methods: This is a prospective, multi-center, randomized controlled trial at four level-3 pediatric intensive care units (ICUs) in the Netherlands and Belgium. Children who are 0-36months old will be randomly assigned to receive either intermittent IV paracetamol or continuous IV morphine up to 48h post-operatively. Morphine will be available as rescue medication for both groups. Validated pain and sedation assessment tools will be used to monitor patients. The sample size (n=208, 104 per arm) was calculated in order to detect a 30% reduction in morphine dose; two-sided significance level was 5% and power was 95%. Discussion: This study will focus on the reduction, or replacement, of morphine by IV paracetamol in children (0-36months old) after cardiac surgery. The results of this study will form the basis of a new pain management algorithm and will be implemented at the participating ICUs, resulting in an evidence-based guideline on post-operative pain after cardiac surgery in infants who are 0-36months old

Genetic variability of the neogregarine apicystis bombi, an etiological agent of an emergent bumblebee disease

The worldwide spread of diseases is considered a major threat to biodiversity and a possible driver of the decline of pollinator populations, particularly when novel species or strains of parasites emerge. Previous studies have suggested that populations of introduced European honeybee (Apis mellifera) and bumblebee species (Bombus terrestris and Bombus ruderatus) in Argentina share the neogregarine parasite Apicystis bombi with the native bumblebee (Bombus dahlbomii). In this study we investigated whether A. bombi is acting as an emergent parasite in the non-native populations. Specifically, we asked whether A. bombi, recently identified in Argentina, was introduced by European, non-native bees. Using ITS1 and ITS2 to assess the parasite's intraspecific genetic variation in bees from Argentina and Europe, we found a largely unstructured parasite population, with only 15% of the genetic variation being explained by geographic location. The most abundant haplotype in Argentina (found in all 9 specimens of non-native species) was identical to the most abundant haplotype in Europe (found in 6 out of 8 specimens). Similarly, there was no evidence of structuring by host species, with this factor explaining only 17% of the genetic variation. Interestingly, parasites in native Bombus ephippiatus from Mexico were genetically distant from the Argentine and European samples, suggesting that sufficient variability does exist in the ITS region to identify continent-level genetic structure in the parasite. Thus, the data suggest that A. bombi from Argentina and Europe share a common, relatively recent origin. Although our data did not provide information on the direction of transfer, the absence of genetic structure across space and host species suggests that A. bombi may be acting as an emergent infectious disease across bee taxa and continents

Diaspore heteromorphism in the invasive Bromus tectorum L. (Poaceae): sterile fl orets increase dispersal propensity and distance

Within a species, the distance travelled by a particular diaspore depends on its morphology. In Poaceae, the presence of terminal sterile florets can lead to diaspore heteromorphism, which may influence dispersal. We tested the hypothesis that the presence of sterile florets favored dispersal in Bromus tectorum L., an invasive grass in the Western US. We used field and controlled experiments to study the dispersal of caryopses with and without sterile florets attached (respectively complex and simple diaspores), as well as pieces of inflorescence that detached from the mother plants. We considered both primary and secondary dispersal, as well as abiotic and biotic dispersal agents. The distance travelled by the diaspores and their attachment to animal fur were related to the presence and number of sterile florets. Abiotic agents moved diaspores over relatively short distances, both in terms of primary and secondary dispersal. A significant proportion of diaspores attached to fur, suggesting a potential for dispersal over longdistances. Complex diaspores were better dispersers than simple ones (and pieces of inflorescence), and this pattern was consistent across the study. However, among complex diaspores, the number of sterile florets had little or no influence. Considering primary and secondary dispersal by abiotic and biotic agents provided a general picture of the dispersal ecology of B. tectorum. For all the dispersal steps and dispersal agents we studied, the presence of sterile florets favored dispersal. These results highlight the functional significance of diaspore heteromorphism induced by floret sterility in the dispersal of Poaceae

Voorkomen van het Zuiderzeekrabbetje <i>Rhithropanopeus harrisii</i> (Gould, 1841) in de Westerschelde

Five male specimens of the White-fingered Mud Crab Rhithropanopeus harrisii were collected from the intake screens of the nuclear power station at Doel on December 20th, 1991. These are the first living specimens of this species recorded in the Westernscheldt

Javana: A System for Building Customized Java Program Analysis Tools

Understanding the behavior of applications running on high-level language virtual machines, as is the case in Java, is non-trivial because of the tight entanglement at the lowest execution level between the application and the virtual machine. This paper proposes Javana, a system for building Java program analysis tools. Javana provides an easy-to-use instrumentation infrastructure that allows for building customized profiling tools very quickly. Javana runs