16,814 research outputs found
Analyzing factors affecting Alaska's salmon permit values: evidence from Bristol Bay drift gillnet permits
Thesis (M.S.) University of Alaska Fairbanks, 2017The effects of total earnings, total costs and mining exploration on permit prices in Alaska are investigated using an autoregressive distributed lag (ARDL) approach to cointegration. I take specific account of regional and gear specific salmon fisheries -- that is, Bristol Bay drift gillnet permits -- in our modelling. I find that there is a stable long-run relationship among permit prices, total earnings, and total costs. It is also found that, in both the short- and long-run, total earnings have a positive and significant relationship with permit prices, while total costs have a negative and significant relationship. Although the mining exploration in the region has a negative and significant effect on permit prices in the short-run, the effect does not seem to last in the long-run
Parity violation, anyon scattering and the mean field approximation
Some general features of the scattering of boson-based anyons with an added
non-statistical interaction are discussed. Periodicity requirements of the
phase shifts are derived, and used to illustrate the danger inherent in
separating these phase shifts into the well-known pure Aharanov-Bohm phase
shifts, and an additional set which arise due to the interaction. It is proven
that the added phase shifts, although due to the non-statistical interaction,
necessarily change as the statistical parameter is varied, keeping the
interaction fixed. A hard-disk interaction provides a concrete illustration of
these general ideas. In the latter part of the paper, scattering with an
additional hard-disk interaction is studied in detail, with an eye towards
providing a criterion for the validity of the mean-field approximation for
anyons, which is the first step in virtually any treatment of this system. We
find, consistent with previous work, that the approximation is justified if the
statistical interaction is weak, and that it must be more weak for boson-based
than for fermion-based anyons.Comment: 17 pages plus 3 encoded/compressed post-script figures,
UdeM-LPN-TH-94-18
Photoconductivity and phototropy in non-crystalline solids
Photoconductivity and phototropy in noncrystalline solid
Multi-physics simulation of friction stir welding process
Purpose: The Friction Stir Welding (FSW) process comprises of several highly coupled (and non-linear) physical phenomena: large plastic deformation, material flow transportation, mechanical stirring of the tool, tool-workpiece surface interaction, dynamic structural evolution, heat generation from friction and plastic deformation, etc. In this paper, an advanced Finite Element (FE) model encapsulating this complex behavior is presented and various aspects associated with the FE model such as contact modeling, material model and meshing techniques are discussed in detail. Methodology: The numerical model is continuum solid mechanics-based, fully thermomechanically coupled and has successfully simulated the friction stir welding process including plunging, dwelling and welding stages. Findings: The development of several field variables are quantified by the model: temperature, stress, strain, etc. Material movement is visualized by defining tracer particles at the locations of interest. The numerically computed material flow patterns are in very good agreement with the general findings from experiments. Value: The model is, to the best of the authors’ knowledge, the most advanced simulation of FSW published in the literature
Plastic collapse of pipe bends under combined internal pressure and in-plane bending
Plastic collapse of pipe bends with attached straight pipes under combined internal pressure and in-plane closing moment is investigated by elastic–plastic finite element analysis. Three load histories are investigated, proportional loading, sequential pressure–moment loading and sequential moment–pressure loading. Three categories of ductile failure load are defined: limit load, plastic load (with associated criteria of collapse) and instability loads. The results show that theoretical limit analysis is not conservative for all the load combinations considered. The calculated plastic load is dependent on the plastic collapse criteria used. The plastic instability load gives an objective measure of failure and accounts for the effects of large deformations. The proportional and pressure–moment load cases exhibit significant geometric strengthening, whereas the moment–pressure load case exhibits significant geometric weakening
Flight evaluation of LORAN-C in the State of Vermont
A flight evaluation of LORAN C as a supplement to existing navigation aids for general aviation aircraft, particularly in mountainous regions of the United States and where VOR coverage is limited was conducted. Flights, initiated in the summer months, extend through four seasons and practically all weather conditions typical of northeastern U.S. operations. Assessment of all the data available indicates that LORAN C signals are suitable as a means of navigation during enroute, terminal and nonprecision approach operations and the performance exceeds the minimum accuracy criteria
Parametric finite-element studies on the effect of tool shape in friction stir welding
The success of the Friction Stir Welding (FSW) process, and the weld quality produced, depends significantly on the design of the welding tool. In this paper the effect of variation in various tool geometry parameters on FSW process outcomes, during the plunge stage, were investigated. Specifically the tool shoulder surface angle and the ratio of the shoulder radius to pin radius on tool reaction force, tool torque, heat generation, temperature distribution and size of the weld zone were investigated. The studies were carried out numerically using the finite element method. The welding process used AA2024 aluminium alloy plates with a thickness of 3 mm. It was found that, in plunge stage, the larger the pin radius the higher force and torque the tool experiences and the greater heat generated. It is also found that the shoulder angle has very little effect on energy dissipation as well as little effect on temperature distribution
Simulation of the small punch creep test with consideration of variation of material properties
A new finite element model of the small punch creep test is described. The material constitutive relationship for creep considered is a simple Norton power law: in this study the exponent in the power law is varied for each element to simulate the random behaviour of creep. The influence of this random variation, and the effect of the friction factor between the punch and specimen, on the deformation and stress field has been investigated
Identification of Uncommon Non-crystalline Solids as ''real'' Glasses
Identification of uncommon noncrystalline solids as real glasse
- …