Development of non evaporable getter pumps for large hydrogen throughput and capacity in high vacuum regimes

In vacuum technology, capture pumps based on Non Evaporable Getters are commonly applied to ultra-high vacuum systems. Recent improvements in the absorption of hydrogenic species, with the introduction of Zr–V–Ti–Al alloys (ZAO®), make them an appealing and viable solution for the application in fusion research, and in particular for the vacuum system of neutral beam injectors (hydrogen pumping speed of thousands of m3/s, pressure of tens of mPa). This paper describes the characterization of the new NEG material in pumps of increasing dimensions, including the development, construction and test of a large mockup pump of modular design, to demonstrate the scalability of the technology. Effective pumping speeds of the order of 14 m3/s or higher at a concentration of 130 Pa m3/kg were achieved by the mockup pump, for an installed getter mass of about 16 kg, and a stability within 10% up to 1300 Pa m3/kg The measured effective pumping speed per unit area of sintered disks is of the order of 3.5 m/s, corresponding to 4.9 m/s at the disk surfaces as derived from numerical simulations. General guidelines for the design of large NEG pumps for hydrogen are discussed, including thermal aspects and duty cycle of the pump

Olea europea L. Leaves and Hibiscus sabdariffa L. Petals Extracts: Herbal Mix from Cardiovascular Network Target to Gut Motility Dysfunction Application

It is well known that diet and nutrition play a critical role in the etiopathogenesis of many disorders. On the other hand, nutrients or bioactive compounds can specifically target and control various aspects of the mechanism underlying the pathology itself, and, in this context, diseases related to intestinal motility disorders stand out. The Herbal Mix (HM) consisting of Olea europea L. leaf (OEE) and Hibiscus sabdariffa L. (HSE) extracts (13:2) has been proven to be a promising nutraceutical option for many diseases, but its potential in inflammatory-driven gastrointestinal disorders is still unexplored. In this study, HM effects on guinea-pig ileum and colon contractility (induced or spontaneous) and on human iNOS activity, as well as on human colorectal adenocarcinoma Caco-2 cells, were studied. Results showed that the HM can control the ileum and colon contractility without blocking the progression of the food bolus, can selectively inhibit iNOS and possesses a strong pro-apoptotic activity towards Caco-2 cells. In conclusion, the present results suggest that, in some diseases, such as those related to motility disorders, an appropriate nutritional approach can be accompanied by a correct use of nutraceuticals that could help not only in ameliorating the symptoms but also in preventing more severe, cancer-related conditions

Chemical Bond and Charge Transfer Dynamics of a Dye-Hierarchical TiO2 Hybrid Interface

The adsorption of Zn-Tetra-Phenyl-Porphyrin (ZnTPP) on nanoporous hierarchically organized anatase TiO2 structures, and the properties of the corresponding hybrid interface were studied by synchrotron radiation experiments. The molecular structure, electronic properties and the bonding with nanostructured TiO2 surfaces were analyzed by photoemission (XPS and UPS) and x-ray absorption spectroscopy (XAS). The charge transfer at the interface was investigated by means of valence band resonant photoemission experiments (ResPES) at the C K edge. We show that the charge transfer dynamics between the photo-excited ZnTPP and TiO2 is strongly influenced by the presence of defects on the TiO2 surface. On a stoichiometric anatase nanostructure, ZnTPP bonding occurs primarily via carbon atoms belonging to the molecular phenyl rings and this creates a preferential channel for the charge transfer. This phenomenon is reduced in the case of defective TiO2 surface, where ZnTPP interacts mainly through the molecule macrocycle. Our results represent a surface science study of the dye molecule behavior on a nanoporous TiO2 photoanode relevant to dye-sensitized or hybrid solar cell applications and it shows the importance of the surface oxidation state for the charge transfer proces

Clay-fulleropyrrolidine nanocomposites

In this work, we describe the insertion of a water-soluble bisadduct fulleropyrrolidine derivative into the interlayer space of three layered smectite clays. The composites were characterized by a combination of powder X-ray diffraction, transmission electron microscopy, X-ray photoemission and FTIR spectroscopies, and laser flash photolysis measurements. The experiments, complemented by computer simulations, give insight into the formation process, structural details, and properties of the fullerene/clay nanocomposites. The reported composite materials constitute a new hybrid system, where C-60 differs from its crystals or its solutions, and open new perspectives for the design and construction of novel C-60-based organic/clay hybrid materials.</p

Intimate functional interactions between TGS1 and the Smn complex revealed by an analysis of the Drosophila eye development.

This is the final version. Available from Public Library of Science via the DOI in this record. Trimethylguanosine synthase 1 (TGS1) is a conserved enzyme that mediates formation of the trimethylguanosine cap on several RNAs, including snRNAs and telomerase RNA. Previous studies have shown that TGS1 binds the Survival Motor Neuron (SMN) protein, whose deficiency causes spinal muscular atrophy (SMA). Here, we analyzed the roles of the Drosophila orthologs of the human TGS1 and SMN genes. We show that the Drosophila TGS1 protein (dTgs1) physically interacts with all subunits of the Drosophila Smn complex (Smn, Gem2, Gem3, Gem4 and Gem5), and that a human TGS1 transgene rescues the mutant phenotype caused by dTgs1 loss. We demonstrate that both dTgs1 and Smn are required for viability of retinal progenitor cells and that downregulation of these genes leads to a reduced eye size. Importantly, overexpression of dTgs1 partially rescues the eye defects caused by Smn depletion, and vice versa. These results suggest that the Drosophila eye model can be exploited for screens aimed at the identification of genes and drugs that modify the phenotypes elicited by Tgs1 and Smn deficiency. These modifiers could help to understand the molecular mechanisms underlying SMA pathogenesis and devise new therapies for this genetic disease

Enhanced hydrogen and methane storage of hybrid mesoporous organosilicas

In this study, hybrid mesoporous organosilicas (HMOs) were synthesized by using tetraethyl orthosilicate (TEOS) as the silica source and 1,4-bis(triethoxysilyl)benzene (BTB) in various ratios of BTB to TEOS. The two extreme cases of 0 and 100 mol% BTB were compared with the partial addition of BTB (25 mol%) and the partial absence of TEOS (75 mol% BTB). The synthesized mesoporous materials were characterized by means of powder X-ray diffraction (PXD), scanning electron microscopy (SEM) and helium pycnometry for the determination of skeletal density. The Brunauer-Emmett-Teller (BET) method was used for the determination of the specific surface area (SSA) and non-local density functional theory (NLDFT) calculations were employed for the determination of the pore size distribution (PSD). The hydrogen and methane sorption properties were investigated using a Sieverts apparatus under isothermal sorption equilibrium conditions at cryogenic and close to ambient temperatures, respectively. For hydrogen, the combination of phenyl rings with pores at the micro/mesopore border resulted in an increase in sorption capacity. The simultaneous presence of two different precursors increased the surface inhomogeneity, which led to a wider distribution of adsorption sites close to the micro/mesopore border, which favored the hydrogen sorption properties. The presence of the phenyl rings doubled the number of methane molecules that the material surface could accommodate. The partial substitution of TEOS by BTB (25 mol%) gave the same density of adsorbed methane as the non-hybrid material, which consisted of 100% BTB. The materials exhibited excellent reversibility and sorption stability upon aging. Their sorption performance was evaluated using the Tóth model and was correlated with their structural characteristics. The fraction of micropores among the total number of pores was quantitatively correlated with the maximum storage capacity and the adsorbate-adsorbent interaction strength. Finally, for a low coverage of methane the enthalpy of adsorption was calculated by the Clausius-Clapeyron equation

The S-adenosylmethionine analog sinefungin inhibits the trimethylguanosine synthase TGS1 to promote telomerase activity and telomere lengthening

Mutations in many genes that control the expression, the function, or the stability of telomerase cause telomere biology disorders (TBDs), such as dyskeratosis congenita, pulmonary fibrosis, and aplastic anemia. Mutations in a subset of the genes associated with TBDs cause reductions of the telomerase RNA moiety hTR, thus limiting telomerase activity. We have recently found that loss of the trimethylguanosine synthase TGS1 increases both hTR abundance and telomerase activity and leads to telomere elongation. Here, we show that treatment with the S-adenosylmethionine analog sinefungin inhibits TGS1 activity, increases the hTR levels, and promotes telomere lengthening in different cell types. Our results hold promise for restoring telomere length in stem and progenitor cells from TBD patients with reduced hTR levels

Formation of carbon nanotubes on iron/cobalt oxides supported on zeolite-Y: Effect of zeolite textural properties and particle morphology

The effect of the textural properties and morphology of zeolite Y, used as support of iron (Fe) or cobalt (Co) oxides, on the quantity and quality of the multi-wall carbon nanotubes (MWNTs) synthesized by catalytic chemical vapour deposition (CCVD) of acetylene was studied. The parent zeolite Y was modified by various dealumination procedures, namely hydrothermal treatment (steaming), treatment with ammonium hexafluorosilicate (AHFS) and combined steaming-AHFS. The ion-exchange and wet impregnation methods were used for supporting the metals on the zeolite Y samples, with the latter method providing the most effective catalysts for carbon nanotube (CNT) formation. Severe dealumination of zeolite-Y by steaming, which induced the formation of secondary meso/macropores and of relatively large particles/aggregates, resulted in significant decrease in the formation of CNTs compared to the catalysts based on the parent zeolite-Y. Post-treatment of the steamed samples with AHFS had no beneficial effect on the catalysts’ activity. Moderate dealumination of the parent zeolite Y by AHFS also inhibited the formation of CNTs, but to a lesser extent compared to the catalysts based on steamed zeolite Y. The TGA studies revealed the presence of carbon phases with different thermal stability in the zeolite–CNT composites, ranging from amorphous carbon to well-graphitized MWNTs. TEM images and micro-Raman spectra taken right after growth confirmed the formation of high quality MWNTs with a low degree of disorder irrespective of the catalysts used, the degree of dealumination of the zeolite Y and the textural and morphological characteristics of the zeolitic support.